BS-7614-1992 ISO-9961-1992.pdf
《BS-7614-1992 ISO-9961-1992.pdf》由会员分享,可在线阅读,更多相关《BS-7614-1992 ISO-9961-1992.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 7614:1992 ISO 9961:1992 Specification for Natural tracing paper UDC 744.36:676.237 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 14:40:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7614:1992 This British Standard, having been prepared un
2、der the direction of the Paper and Printing Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 November 1992 BSI 08-1999 The following BSI references relate to the work on this standard: Committee reference PAM/20 Draft for comment 89/375
3、11 DC ISBN 0 580 21283 1 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Paper and Printing Standards Policy Committee (PAM/-) to Technical Committee PAM/20, upon which the following bodies were represented: British Paper and Board Indus
4、try Federation Drawing Office Material Manufacturers and Dealers Association HM Customs and Excise Her Majestys Stationery Office Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 14:40:41 GMT+00:00 2006, Un
5、controlled Copy, (c) BSI BS 7614:1992 BSI 08-1999i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2Normative references1 3Definitions1 4Requirements1 5Testing2 6Finished sizes3 7Packing and storage4 8Labelling4 9Test report4 Annex A (normative) Measurement of tran
6、sparency using the reflectance method6 Annex B (normative) Determination of tear growth resistance using the Brecht-Imset method7 Figure 13 Figure 24 Figure B.19 Table 1 Physical properties5 List of referencesInside back cover Licensed Copy: London South Bank University, London South Bank University
7、, Fri Dec 08 14:40:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7614:1992 ii BSI 08-1999 National foreword This British Standard has been prepared under the direction of the Paper and Printing Standards Policy Committee. It is identical with ISO 9961:1992 Draughting media for technical drawings
8、Natural tracing paper, published by the International Organization for Standardization (ISO). Cross-references International StandardCorresponding British Standard ISO 5-2:1991BS 1384 Photographic density measurements Part 2:1992 Specification for geometric conditions for transmission densitya (Iden
9、tical) ISO 186:1985BS 3430:1986 Method for sampling to determine the average quality of paper and board (Identical) ISO 187:1990BS 3431:1973 Method for the conditioning of paper and board for testing (Technically equivalent) ISO 216:1975BS 4000 Sizes of paper and board Part 1:1990 Specification for
10、A and B series of trimmed sizes of writing paper and certain classes of printed matters (Identical) ISO 536:1976BS 3432:1980 Method for determination of grammage of paper and board (Identical) ISO 1974:1990BS 4468:1990 Method for determination of the internal tearing resistance of paper (Identical)
11、ISO 2469:1977BS 4432 Methods for determining optical properties of pulp, paper and board Part 1:1980 Measurement of diffuse reflectance factor of paper, board and pulps (Identical) ISO 4046:1978BS 3203:1979 Glossary of paper, board, pulp and related terms (Identical) ISO 5457:1980BS 3429:1984 Specif
12、ication for sizes of drawing sheets (Technically equivalent) ISO 5630-1:1991BS 6388 Accelerated ageing of paper and board Part 1:1991 Method for dry heat treatment at 105 C (Identical) ISO 8791-2:1990BS 4420:1990 Method for determination of the Bendtsen roughness of paper and board (Identical) a In
13、preparation. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 14:40:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7614:1992 BSI 08-1999iii The Technical Committee has reviewed the provisions of IEC 50(845), ISO 217, ISO 5627, ISO 9175-1, ISO 9175-2 and ISO 995
14、7-1 to which normative reference is made in the text, and has decided that they are acceptable for use in conjunction with this standard. BS 4000-2:1983 Specification for untrimmed sizes is related to ISO 217. A British Standard does not purport to include all the necessary provisions of a contract.
15、 Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i to iv, pages 1 to 10, an inside back cover a
16、nd a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 14:40:41 GMT+00:00 2006, Uncon
17、trolled Copy, (c) BSI iv blank Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 14:40:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7614:1992 BSI 08-19991 1 Scope This International Standard specifies the minimum requirements for draughting media made from nat
18、ural tracing paper. It details qualities necessary for draughting and reproduction, and specifies appropriate test methods for the most commonly used grammages within the range 40 g/m2 to 160 g/m2 i.e. 62,5 g/m2, 72,5 g/m2, 92,5 g/m2 and 112,5 g/m2. 2 Normative references The following standards con
19、tain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investig
20、ate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 5-2:1991, Photography Density measurements Part 2: Geometric conditions for transmission density. ISO 186:1985, Paper a
21、nd board Sampling to determine average quality. ISO 187:1990, Paper, board and pulps Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples. ISO 216:1975, Writing paper and certain classes of printed matter Trimmed sizes A and B serie
22、s. ISO 217:1974, Unprocessed writing and printing paper Method of expression of dimensions and direction of manufacture. ISO 536:1976, Paper and board Determination of grammage. ISO 1974:1990, Paper Determination of tearing resistance (Elmendorf method). ISO 2469:1977, Paper, board and pulps Measure
23、ment of diffuse reflectance factor. ISO 4046:1978, Paper, board, pulp and related terms Vocabulary. ISO 5457:1980, Technical drawings Sizes and layout of drawing sheets. ISO 5627:1984, Paper and board Determination of smoothness (Bekk method). ISO 5630-1:1991, Paper and board Accelerated ageing Part
24、 1: Dry heat treatment at 105 C. ISO 8791-2:1990, Paper and board Determination of roughness/smoothness (air leak methods) Part 2: Bendtsen method. ISO 9175-1:1988, Tubular tips for hand-held technical pens using India ink on tracing paper Part 1: Definitions, dimensions, designation and marking. IS
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-7614-1992 ISO-9961-1992 BS 7614 1992 ISO 9961
链接地址:https://www.31doc.com/p-3736017.html