BS-7851-1996 IEC-61119-7-1995.pdf
《BS-7851-1996 IEC-61119-7-1995.pdf》由会员分享,可在线阅读,更多相关《BS-7851-1996 IEC-61119-7-1995.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 7851:1996 IEC 1119-7: 1995 Digital audio tape cassette system (DAT) DAT logo application rule ICS 33.160.30 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7851:1996 This British Standard
2、, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 May 1996 BSI 09-1999 The following BSI references relate to the work on this standard: Committee reference EPL/100/2 Draft for comment
3、 93/212601 DC ISBN 0 580 25568 9 Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee EPL/100, Audio, video and multimedia systems and equipment, to Subcommittee EPL/100/2, Recording, upon which the following bodies were repre
4、sented: Association of Professional Recording Services Limited Audio Engineering Society British Broadcasting Corporation British Kinematograph, Sound and Television Society British Tape Industry Association Federation of the Electronics Industry ITV Association (ITVA) Royal Television Society Amend
5、ments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7851:1996 BSI 09-1999i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2
6、Bibliographical references1 3DAT logo types1 4DAT logo application rules1 5Copyright of DAT logo1 6Supply of DAT logo information1 7Detailed specification of the DAT logo1 Figure 1 Basic DAT logo2 Figure 2 Solid DAT logo2 Figure 3 Wide letters for Digital Audio Tape3 Figure 4 Solid DAT logo. Extende
7、d letters for Digital Audio Tape3 Figure 5 Examples of DAT logos4 List of referencesInside back cover Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7851:1996 ii BSI 09-1999 National foreword This British S
8、tandard has been prepared by Technical Subcommittee EPL/100/2 and is identical with IEC 1119-7:1995, published by the International Electrotechnical Commission (IEC). This standard is Part of the IEC 1119 series, the other Parts of which have mostly been published as ENs by the European Committee fo
9、r Electrotechnical Standardization (CENELEC) and implemented as a BS EN 61119 series. IEC 1119 includes the following Parts: Part 1: Dimensions and characteristics (EN 61119-1:1994); Part 2: DAT calibration tape (EN 61119-2:1994); Part 3: DAT tape properties (EN 61119-3:1994); Part 4: Character pack
10、 format1); Part 5: DAT for professional use (EN 61119-5:1995); Part 6: Serial copy management system (EN 61119-6:1994); A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with
11、 a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amen
12、dments incorporated. This will be indicated in the amendment table on the inside front cover. 1) In preparation. Cross-references Publication referred toCorresponding British Standard BS EN 61119 Digital audio tape cassette system (DAT) IEC 1119-1:1992Part 1:1994 Dimensions and characteristics IEC 1
13、119-2:1991Part 2:1994 DAT calibration tape IEC 1119-3:1992Part 3:1994 DAT tape properties IEC 1119-6:1992Part 6:1994 Serial copy management system Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7851:1996 BS
14、I 09-19991 1 Scope This technical report defines the use of the DAT logo on DAT equipment and accessories. It provides information on the specification, copyright, and application rule of the logo. 2 Bibliographic references IEC 1119-1:1992, Digital audio tape cassette system (DAT) Part 1: Dimension
15、s and characteristics. IEC 1119-2:1991, Digital audio tape cassette system (DAT) Part 2: DAT calibration tape. IEC 1119-3:1992, Digital audio tape cassette system (DAT) Part 3: DAT tape properties. IEC 1119-4, Digital audio tape cassette system (DAT) Part 4: Character pack format (under consideratio
16、n). IEC 1119-6:1992, Digital audio tape cassette system (DAT) Part 6: Serial copy management system. 3 DAT logo types Figure 1 to Figure 5 show several DAT logo types. The DAT logo is composed of two phrases, “DAT” and “Digital Audio Tape”. Details of the logo types are specified in 7.4. The use of
17、each logo is restricted and defined in the application rules for DAT logos. 4 DAT logo application rules 4.1 The DAT logo assures compatibility between DAT cassette systems for consumer use, manufactured in conformance with the DAT cassette system specifications as laid down in IEC 1119-1 to IEC 111
18、9-6. The DAT logo shall be used on all consumer DAT recorders/players and related products, including DAT tapes. 4.2 The manufacturers involved with the production of DAT cassette recorders/players and related products shall positively promote the use of the DAT logo. 5 Copyright of the DAT logo 5.1
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-7851-1996 IEC-61119-7-1995 BS 7851 1996 IEC 61119 1995
链接地址:https://www.31doc.com/p-3736160.html