BS-814-1-1987 EN-210-1986.pdf
《BS-814-1-1987 EN-210-1986.pdf》由会员分享,可在线阅读,更多相关《BS-814-1-1987 EN-210-1986.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 814-1: 1987 EN 210:1986 Mild steel and tinplate drums (light duty: fixed ends) Part 1: Specification for steel drums with a total capacity of 216.5 litres EN title: Steel drums. Tight head drums with a total capacity of 216,5 litres This European Standard EN 210 has the status of
2、 a British Standard UDC 621.798.164 034.14:621.642.16 034.14:620.1:531.73 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 04:39:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 814-1:1987 This British Standard, having been prepared under the direction of the Pac
3、kaging and Freight Containers Standards Committee, was published under the authority of the Board of BSI and comes into effect on 31 December 1987 BSI 07-1999 First published as BS 814 October 1938 First revision December 1950 Second revision January 1961 Third revision October 1974 Fourth revision
4、Part 1 December 1987 The following BSI references relate to the work on this standard: Committee reference PKM/551 Draft for comment 83/36723 DC ISBN 0 580 15869 1 Cooperating organizations The European Committee for Standardization, under whose supervision this European Standard was prepared, compr
5、ises the national standards organizations of the following Western European countries. AustriaOesterreichisches Normungsinstitut BelgiumInstitut belge de normalisation DenmarkDansk Standardiseringsraad FinlandSuomen Standardisoimisliito, r.y. FranceAssociation franaise de normalisation GermanyDeutsc
6、hes Institut fr Normung e.V. GreeceHellenic Organization for Standardization IrelandNational Standards Authority of Ireland ItalyEnte Nazionale Italiano di Unificazione NetherlandsNederlands Normalisatie-instituut NorwayNorges Standardiseringsforbund PortugalDireco-Geral da Qualidade SpainInstituto
7、Espagol de Normalizacin SwedenStandardiseringskommissionen i Sverige SwitzerlandAssociation suisse de normalisation United KingdomBritish Standards Institution Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: London South Bank University, London South Bank University,
8、 Fri Dec 08 04:39:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 814-1:1987 BSI 07-1999i Contents Page Cooperating organizationsInside front cover National forewordii Brief history2 Text of EN 2103 National appendix AInside back cover National appendix BInside back cover Licensed Copy: London Sout
9、h Bank University, London South Bank University, Fri Dec 08 04:39:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 814-1:1987 ii BSI 07-1999 National foreword This British Standard has been prepared under the direction of the Packaging and Freight Containers Standards Committee and is the English la
10、nguage version of EN 210:1986 “Steel drums: Tight head drums with a total capacity of 216,5 litres”, published by the European Committee for Standardization (CEN). The Technical Committee has reviewed the relevant provisions of EURONORMS 130-77 and 131-77, to which reference is made in the text, and
11、 has decided that they are acceptable for use in conjunction with this standard. For normal applications it may be found that steel grade CR4 in BS 1449-1 meets the requirements of steel grade P 01 in EU 130-77, but purchasers are advised to check with their suppliers. Terminology and conventions. T
12、he text of the European Standard may use some terminology and conventions that differ from those commonly used in British Standards. Textual error. During adoption of the text of the European Standard, the textual error given below was discovered. It has been reported to CEN Central Secretariat in a
13、 proposal to amend the European Standard. In clause 8, the two references to ISO 90:1977 should be to ISO 90-1:1986. In item 8 f), the reference to Table 2 should be to Table 1. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are
14、responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 4, an inside back cover and a back cov
15、er. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 04:39:46 GMT+00:00 2006, Uncontrolled Copy,
16、 (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 210 June 1986 UDC 621.798.164 034.14:621.642.16 034.14:620.1:531.73 Key words: Barrels; containers; steel products; equipment specifications; dimensions; material specifications; capacity; measurement; mass; dimensional tolerances; design
17、ation English version Steel drums Tight head drums with a total capacity of 216,5 litres Fts en acier. Fts ouverture partielle dune capacit totale de 216,5 litres Stahlfsser. Spundbehlter mit einem Volumen von 216,5 Litern This European Standard was accepted by CEN on 1986-03-12. CEN members are bou
18、nd to comply with the requirements of CEN Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application
19、to the CEN Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to CEN Central Secretariat has the
20、same status as the official versions. CEN members are the national standards organizations of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Eu
21、ropen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels CEN 1986 Copyright reserved to all CEN members Ref. No. EN 210:1986 E Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 04:39:46 GMT+00:00 2006, Uncontro
22、lled Copy, (c) BSI EN 210:1986 BSI 07-1999 2 Brief history This European Standard was drawn up by the Technical Committee CEN/TC 101 “Steel drums”, the Secretariat of which is held by DIN. This European Standard was adopted by CEN on the strength of its acceptance by the following Member countries:
23、Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Italy, Netherlands, Spain, Sweden, United Kingdom. Contents Page Brief history2 1Object and field of application3 2References3 3Definitions3 4Dimensions3 5Material3 6Construction3 7Finish3 8Capacity, method of measuring total capacity3 9D
24、esignation3 Figure 1 Tight head drum, dimensions4 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 04:39:46 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 210:1986 BSI 07-19993 1 Object and field of application This European Standard specifies the characteristics
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-814-1-1987 EN-210-1986 BS 814 1987 EN 210 1986
链接地址:https://www.31doc.com/p-3736311.html