《BS-8220-1-2000.pdf》由会员分享,可在线阅读,更多相关《BS-8220-1-2000.pdf(20页珍藏版)》请在三一文库上搜索。
1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS 8220-1:2000 ICS 13.310
2、 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Guide for security of buildings against crime Part 1: Dwellings Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 01:12:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI This British Standard, hav
3、ing been prepared under the direction of the Sector Committee for Building and Civil Engineering, was published under the authority of the Standards Committee and comes into effect on 15 June 2000 BSI 06-2000 First published February 1986 Second edition June 2000 The following BSI references relate
4、to the work on this standard: Committee reference B/209/10 Draft for comment 98/106410 DC ISBN 0 580 33145 8 BS 8220-1:2000 Amendments issued since publication Amd. No.DateComments Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Co
5、mmittee B/209, General Building Codes, to Sub-committee B/209/10, Security of Buildings, upon which the following bodies were represented: Construction Confederation Chartered Institute of Building Department of the Environment, Transport and the Regions National Council of Building Material Produce
6、rs National House Building Council Royal Institute of British Architects Royal Institution of Chartered Surveyors The following bodies were also represented in the drafting of the standard, through sub-committees and panels: Association of Builders Hardware Manufacturers Association of Building Engi
7、neers Association of Burglary Insurance Surveyors British Security Industry Association British Woodworking Federation Building Research Establishment Chief and Assistant Chief Fire Officers Association Consumer Policy Committee of BSI Council for Aluminium in Building Door and Shutter Manufacturers
8、 Association Flat Glass Manufacturers Association Glass and Glazing Federation Guild of Architectural Ironmongers Home Office International Professional Security Association Loss Prevention Council Master Locksmiths Association Licensed Copy: London South Bank University, London South Bank Universit
9、y, Fri Dec 08 01:12:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 8220-1:2000 BSI 06-2000i Contents Page Committees responsibleInside front cover Forewordii Introduction1 1Scope1 2Normative references1 3Terms and definitions2 4Crime prevention in residential neighbourhoods3 5Security of dwellings
10、 in low-rise developments5 6Security of dwellings in medium and high-rise developments5 7Enhancing the security of vulnerable windows8 8Enhancing the security of external doors9 9Intruder deterrent and detection systems11 10CCTV surveillance systems12 Annex A (normative) Specification and design of
11、materials used for windows and doors13 Bibliography15 Table 1 Typical performance characteristics of lamps used in security lighting11 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 01:12:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii BSI 06-2000 BS 8220-1:20
12、00 Foreword This revision of BS 8220-1 has been prepared by Technical Committee B/209 and replaces BS 8220-1:1986 which is withdrawn. The scope of this new edition has been enlarged to include guidance on the layout and landscaping of neighbourhoods to deter potential burglars, increase their risk o
13、f detection and provide people with a safer, more secure environment. Advice is given on new Product Assessment Specifications (PASs) for doors and windows designed to provide enhanced security. New guidance is also included on external lighting, CCTV and intruder detection systems. Because of the m
14、any different situations which may need to be addressed when trying to reduce the risk of crime, commentary has been included to encourage creative design solutions. This part of BS 8220 has been published at the request of the Home Office and the recommendations it contains should be read in conjun
15、ction with the fire safety requirements of BS 5588-1, regarding the provision of means of escape in residential buildings. The other parts of BS 8220 are concerned with the security of the following types of building: Part 2: Shops and offices; Part 3: Warehouses and distribution units. This standar
16、d should not be regarded as a substitute for expert advice; the intention is that it should complement it. Crime prevention should be considered at all stages of the design life of the built environment. Annex A is normative. A British Standard does not purport to include all the necessary provision
17、s of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 15 and a
18、back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 01:12:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BSI 06-20001 BS 8220-1:2000 Introduction Crime proble
19、ms are caused by a multiplicity of factors: family, social groups, education, moral, culture, drug and alcohol abuse etc. The influence of the layout of neighbourhoods and the design of buildings on these factors is limited. The built environment, however, does have an influence on specific crime pr
20、oblems and the fear of crime, by influencing the behaviour of the following: offenders; guardians (police and informal guardians, such as residents); and potential victims (and/or targets) of crime and the fear of crime. Factors influencing offenders are accessibility, the presence, number or concen
21、tration of offenders, and the availability of escape routes. Factors influencing guardians are the presence and number of guardians able to exercise surveillance and control, good visibility, layout, lighting etc., and the physical willingness and ability of guardians to react. Most burglaries and o
22、ther crimes relating to dwellings are committed by offenders who have been given easy opportunities to commit crimes. The most basic levels of security can deter such persons and are likely to deter even determined offenders. The more experienced burglar is usually a person with local knowledge, who
23、 intends to steal but has no specific target in mind. This type of opportunist offender spends time systematically checking out neighbourhoods to target properties where access is easy, surveillance is low and the contents are valuable. If he is unable to find what he is looking for, or he considers
24、 it too risky or difficult to break into, he is likely to go elsewhere. Once a burglar has chosen a neighbourhood and focused on a particular street, he is likely to be influenced as much by symbolic and psychological barriers as actual or physical ones. A narrowed road entrance or a change in textu
25、re of the road surface imposes a feeling of unease or trespass on a stranger who enters that space, making the would-be-burglar feel conspicuous and heightening perceptions of the risk involved. In making the final selection of a target dwelling, the potential burglar looks for features that makes o
26、ne property stand out from the others in terms of small risk for rich pickings. In this respect, dwellings that appear to be unoccupied are more at risk than others. Clues the burglar looks for include open windows, lights on, uncollected deliveries, a car on the hardstanding. He may also look to se
27、e whether the grass has been cut. Features that may deter a burglar include good natural surveillance from passers-by and other dwellings, dogs and burglar alarms. The aim of this standard is to provide guidance for architects, designers, town planners, builders, housing managers and crime preventio
28、n officers, to enable them to make neighbourhoods attractive to residents and unattractive to burglars, by reducing opportunities for crime through building detail, landscaping and site layout. Specification and design of materials used for windows and doors is given in annex A. 1 Scope This British
29、 Standard gives guidance and information on layout, landscaping, and security measures aimed at deterring burglars from selecting and entering dwellings, whether new or existing, single or multiple units. This standard covers measures to enhance the security of windows and external doors, access con
30、trol, the use and deployment of security lighting, CCTV, intruder detection systems, and measures to improve security and reduce fear of crime. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this British Sta
31、ndard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. For updated references, the latest edition of the publication referred to applies. BS 459:1988, Specification for matchboarded wooden door leaves for external use. BS 644-1:1989, Wood wind
32、ows Specification for factory assembled windows of various types. BS 1186-2:1988, Timber for and workmanship in joinery Specification for workmanship. BS 1245:1975, Specification for metal door frames (steel). BS 2911:1974, Specification for letterplates. BS 3621:1998, Specification for thief resist
33、ant locks. BS 4533-102.1:1990, Luminaires Particular requirements Specification for general purpose luminaires. BS 4533-102.5:1990, Luminaires Particular requirements Specification for floodlighting. BS 4737-1:1986, Intruder alarm systems Specification for installed systems with local audible and/or
34、 remote signalling. BS 4873:1986, Specification for aluminium alloy windows. BS 4787-1:1980, Internal and external wooden door sets, door leaves and frames Specification for dimensional requirements. BS 5286:1978, Specification for aluminium framed sliding glass doors. BS 5489-9:1996, Road lighting
35、Code of practice for lighting of urban areas and public amenity areas. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 01:12:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 2 BSI 06-2000 BS 8220-1:2000 BS 5588-1:1990, Fire precautions in the design and constructio
36、n of buildings Code of practice for residential buildings. BS 6100 (all parts), Glossary of building and civil engineering terms. BS 6262:1982, Code of practice for glazing for buildings. BS 6375-2:1987, Performance of windows Specification for operation and strength characteristics. BS 6510:1984, S
37、pecification for steel windows, sills, window boards and doors. BS 6799:1986, Code of practice for wire-free intruder alarm systems. BS 7150:1989, Code of practice for intruder alarm systems with mains wiring communication. BS 7412:1991, Specification for plastics Windows made from PVC-U Extruded ho
38、llow profiles. BS 7950:1997, Specification for enhanced security performance of casement and tilt/turn windows for domestic application. BS 8213-4:1990, Windows doors and rooflights Code of practice for the installation of replacement windows and doorsets in dwellings. BS 8214:1990, Code of practice
39、 for fire door assemblies with non-metallic leaves. BS EN 485-1:1994, Aluminium and aluminium alloys Sheet, strip and plate Technical conditions for inspection and delivery. BS EN 755-1:1997, Aluminium and aluminium alloys Extruded rod/bar, tube and profiles Technical conditions for inspection and d
40、elivery. BS EN 942:1996, Timber in joinery General classification of timber quality. BS EN 50132-7:1996, Alarm systems CCTV surveillance systems for use in security applications Application guidelines. DD ENV 1627:1999, Windows, doors, shutters Burglar resistance Requirements and classification. PAS
41、 023-1:1999, General performance requirements for door assemblies Single leaf doors. PAS 024-1:1999, Enhanced security performance for door assemblies Single leaf doors. 3 Terms and definitions For the purpose of this British Standard, the definitions given in BS 6100 (some of which are replicated b
42、elow for convenience) and the following apply. 3.1 bolt moveable part of a lock or latch that usually engages a component fixed to a frame and withdraws into the case 3.2 casement window, or part of a window, that opens on hinges, pivots or variable geometry stays 3.3 cylinder lock lock in which the
43、 lock mechanism is operated by one or more cylinders 3.4 deadbolt bolt that is operated in both directions by a key or a thumb turn/lever or both 3.5 door building component for closing an opening in a wall, with hinged, pivoted or sliding operation that allows access or passage 3.6 door assembly co
44、mplete unit, as installed, consisting of the following, any of which may be obtained from separate sources: doorframe, door leaf, any side panels or fanlights, essential hardware 3.7 doorframe part of the door assembly, in which the door leaf moves 3.8 door hardware devices to facilitate opening, cl
45、osing, or making secure the door leaf in the frame, such as: hinges, hinge or dog bolts, door bolts, latches, locks and lock cylinders 3.9 door leaf element which, when fitted with hinges in a doorframe, forms part of the door assembly 3.10 doorset complete unit consisting of a door frame and door l
46、eaf or leaves, supplied with the essential hardware and weatherseal, from a single source 3.11 door viewer component which, when fitted to a door, permits wide angle one-way vision from the secure side of the door Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08
47、01:12:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BSI 06-20003 BS 8220-1:2000 3.12 hinge bolt (dog bolt) device, usually cylindrical, inserted into the hinge edge of a door to provide additional security by the prevention of removal of the door from its frame 3.13 hookbolt curved or hook-shaped de
48、adbolt 3.14 laminated glass glass that consists of two or more plies with one or more adhesive plastic interlayers 3.15 latchbolt bolt of a lock or latch that is held in its extended position by a spring or weight 3.16 lock fastener controlled by a key or similar device that secures a moveable compo
49、nent within a frame or opening 3.17 lock mechanism arrangement and performance of constituent parts of a lock that operate the deadbolt, and where required, provide the differ 3.18 luminaire apparatus that distributes, filters or transforms light 3.19 mortice lock lock for fixing in a mortice, usually in the closing edge of a door leaf or window 3.20 multi-point lock lock comprising of more than one locking point between door leaf and frame, interlinked and centrally controlled 3.21 night latch latch with a bolt that is o
链接地址:https://www.31doc.com/p-3736372.html