BS-9300-C379-388-1971.pdf
《BS-9300-C379-388-1971.pdf》由会员分享,可在线阅读,更多相关《BS-9300-C379-388-1971.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD CONFIRMED NOVEMBER 1986 BS 9300 C379-388 ISSUE 1 MARCH 1971 Electronic parts of assessed quality Silicon stud mounted, power rectifier diodes Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 03:56:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS
2、9300 C379-388 ISSUE 1 MARCH 1971 BSI 04-2000 ISBN 0 580 34373 1 A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity f
3、rom legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 10 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the ins
4、ide front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 03:56:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 9300 C379-388 ISSUE 1 MARCH 1971 BSI 04-2000i Contents Page Appendix Life tests for s
5、mall lot, very expensive testing9 Figure 1 Max. total loss curve7 Figure 2 Derating curve7 Figure 3 Surge current rating for d.c. surges8 Table 1 Group A Inspection3 Table 2 Group B Inspection4 Table 3 Group C Inspection6 Licensed Copy: London South Bank University, London South Bank University, Fri
6、 Dec 08 03:56:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 9300 C379-388 ISSUE 1 MARCH 1971 ii BSI 04-2000 1. Specifications CV7379-CV7388, Issue 1A dated 29 September 1965 with their existing amendments which are reproduced below are hereby adopted as BS 9300 C379-C388. 2. Devices inspected, re
7、leased and supplied to this specification shall be marked CV7379-CV7388 as appropriate and where applicable, with the letters KB. 3. The references to “Military specification”, “Commercial equivalents”, “Reliability assurance provisions” or requirements and “Preparation for delivery” shall be disreg
8、arded. 4. In the Groups A, B and C inspection tables the references in the “K1007/NATO Ref” column shall be superseded by the appropriate reference given in BS 9300 Appendix C (Tables 1 to 5 inclusive). 5. Additional requirements not covered by BS 9300 Appendix C are: 6. Published amendments (consol
9、idated) Page 2. Delete “Joint Services Catalogue Numbers” and substitute “NATO Stock Numbers”. Against each CV type number, delete “5960” and substitute “5961”. Page 1. Amend Note D to read as follows: SL-203-K, SL-403-K, SL-603-K, SL-803-K, SL-1003-K, Stud Anode. SL-203-A to SL-1003-A Stud Cathode.
10、 Page 4. Group B. Subgroup 3, Vibration fatigue. Delete reference to “Note 1” under Inspection level 1A (now S-a). Other amendments are superseded by Table 4 of BS 9300 Appendix C. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 03:56:49 GMT+00:00 2006, Uncontro
11、lled Copy, (c) BSI K1007/CV7379-88 Issue 1A 29th September 1965 BSI 04-20001 Military specification CV 7379-88 Semiconductor device, rectifier diode Indicates Change Absolute Maximum Ratings: Primary Electrical Characteristics: NOTE 1At appropriate VRW for each type Description:This specification co
12、vers the detail requirements for a Silicon, Stud Mounted, Power Rectifier Diode and is in accordance with Specification K1007, Issue 3 except as otherwise stated. Mechanical Dimensions and Outlines: Drawing 10.3.3.2 Connections:Stud-Anode CV7379-7383 Stud-Cathode CV7384-CV7388 Device Ratings VRWVRSI
13、OIFSTcaseTstgVib.Shock UnitVVAACCgg CV7379 CV7384 Min. See Figure 3. 55 Max.20020010150+ 150 20100 CV7380 CV7385 Min. 55 Max.40040010150+ 150 20100 CV7381 CV7386 Min. 55 Max.60060010150+ 150 20100 CV7382 CV7387 Min. 55 Max.80080010150+ 150 20100 CV7383 CV7388 Min. 55 Max.1 0001 00010150+ 150 20100 N
14、oteABC Notes:A.At 125 C stud temperature. For method of measurement see TVC information, sheet 10. The maximum total loss is given in Figure 1. B.See Derating Curve Figure 2 C.Duration 6mSec. D.Commercial equivalent SL-203-3K, SL-403-3K, SL-603-3K SL-803-3K, SL-1003-3K, Stud Anode. SL-203-A, SL-1003
15、-A, Stud Cathode. CharacteristicsVFIRIR UnitV4A4A CV7379-CV7388 Min. Max.1.250500 Conditions TcaseC2525100 VRVNote 1Note 1 IFA10 Reliability Assurance Requirements:Under discussion. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 03:56:49 GMT+00:00 2006, Uncontr
16、olled Copy, (c) BSI K1007/CV7379-88 Issue 1A 29th September 1965 2 BSI 04-2000 Applicable Documents Requirements: Quality Assurance provisions: Preparation for Delivery: Joint Services Catalogue Numbers: This specification has been prepared by, and the Qualification Approval Authority is: Ministry o
17、f Aviation, Royal Radar Establishment, Malvern, Worcs., England. T.V.C. Information Sheets Nos. 9 and 10 MarkingThe device shall be marked as K1007, Section B, 1.3.4 as space permits. Destructive TestsThe tests listed in Table 2, Group B Inspection, Sub Group 2, 3 and 4 are considered destructive. G
18、roup C InspectionThis inspection shall be conducted on the initial lot, and thereafter every ninety days or every fifth lot, whichever occurs first. PackagingThe device shall be packed according to K1007, Issue 3, Section A, 1.2 c) CV7379=5960-99-037-3349 CV7380=5960-99-037-3350 CV7381=5960-99-037-3
19、351 CV7382=5960-99-037-3352 CV7383=5960-99-037-3353 CV7384=5960-99-037-3354 CV7385=5960-99-037-3355 CV7386=5960-99-037-3356 CV7387=5960-99-037-3357 CV7388=5960-99-037-3358 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 03:56:49 GMT+00:00 2006, Uncontrolled Copy
20、, (c) BSI K1007/CV7379-88 Issue 1A 29th September 1965 BSI 04-20003 Table 1 Group A Inspection Examination or Test Test conditions AQL % Insp. Level Symbol Limits Units K1007/NATO Ref.Specific conditionsMin.Max. SUB GROUP 1 Visual and Mechanical Inspection SUB GROUP 2 Forward Voltage Drop Reverse Cu
21、rrent (1) SUB GROUP 3 Reverse Current (2) 5.1 8A.3.2 8A.2.2 8A.2.2 Excluding Physical Dimensions IF= 10A Note 2 VRW= CV7379, CV7384, 200V CV7380, CV7385, 400V CV7381, CV7386, 600V CV7382, CV7387, 800V CV7383, CV7388. 1 000V Tcase= 100 C CV7379, CV7384, 200V CV7380, CV7385, 400V CV7381, CV7386, 600V
22、CV7382, CV7387, 800V CV7383, CV7388, 1 000V 0.65 0.65 2.5 I II I VF IR IR IR IR IR IR IR IR IR IR 1.2 50 50 50 50 50 500 500 500 500 500 V 4A 4A 4A 4A 4A 4A 4A 4A 4A 4A Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 03:56:49 GMT+00:00 2006, Uncontrolled Copy, (
23、c) BSI K1007/CV7379-88 Issue 1A 29th September 1965 4 BSI 04-2000 Table 2 Group B Inspection (See Page 2 Quality Assurance Provisions, Destructive Tests) Examination or Test Test conditions AQL % Insp. Level Symbol Limits Units K1007/NATO Ref.Specific ConditionsMin.Max. F F SUB GROUP 1 Physical Dime
24、nsions SUb GROUP 2 Temperature Cycling Moisture Resistance SUB GROUP 3 Vibration Fatigue SUB GROUP 4 Torque Test SUB GROUPS 5 & 6 Omitted SUB GROUP 7 High Temperature Life (non-operating) SUB GROUP 8 Operating Life 5.1.2 5.5 5.3.1 5.15.1 5.12.1 6.2.1 6.6.1.2.1 6.3.2 6.6.3 (See Appendix) According to
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS 9300 C379 388 1971
链接地址:https://www.31doc.com/p-3736592.html