BS-9364-N008 N010-1978.pdf
《BS-9364-N008 N010-1978.pdf》由会员分享,可在线阅读,更多相关《BS-9364-N008 N010-1978.pdf(6页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 9364 N008 and N010: 1978 Detail specification for low power silicon n-p-n switching transistors 20 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) Full plus additional assessment level UDC 621.316.5:621.318.57:621.382.3 Licensed Copy: London South B
2、ank University, London South Bank University, Fri Dec 08 03:59:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 9364 N008 and N010:1978 BSI 12-1999 ISBN 0 580 10315 3 A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible
3、 for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, page 1 and a back cover. This standard has been updated (see copyright date) an
4、d may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 03:59:02 GMT+00:00 2006, Uncontrolled Copy,
5、(c) BSI BS 9364 N008 and N010:1978 BSI 12-1999i Contents Page General 3Marking and terminal identification1 5Ordering information1 6Inspection requirements1 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 03:59:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii bl
6、ank Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 03:59:02 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 9364 N008 and N010:1978 BSI 12-19991 General This specification is technically equivalent to BS 9364 N007 and N009 except as given below. 3 Marking and ter
7、minal identification In 3.2 d) read the number of this detail specification as BS 9364 N008, Issue 1 or BS 9364 N010, Issue 1, as appropriate. 5 Ordering information Orders for this transistor shall contain the following minimum information: 6 Inspection requirements In subgroup C1, change dimension
8、 L to read 38.1 mm minimum. In subgroup D1, change dimension L2 to read 12.7 mm minimum. ELECTRONIC COMPONENTS OF ASSESSED QUALITY DETAIL SPECIFICATION IN ACCORDANCE WITH BS 9300:1969 MANUFACTURERS TYPE NUMBER CV8615 and CV8616 LONG LEAD VERSION For ordering information see clause 5 Outline and dime
9、nsions. Third angle projection LOW POWER SWITCHING TRANSISTOR N-P-N 20 V SILICON PLANAR EPITAXIAL AMBIENT RATED HERMETIC ENCAPSULATION The collector is electrically connected to the envelope All dimensions in mm For detail dimensions see BS 3934 SO-133A FULL ASSESSMENT LEVEL PLUS ADDITIONAL REQUIREM
10、ENTS Marking information see clause 3 . . . (Qty).Transistor type CV8615 to BS 9364 N008, Issue 1, dated July 1978 or . . . (Qty).Transistor type CV8616 to BS 9364 N010, Issue 1, dated July 1978 Refer to Qualified Products List PD 9002 for details of manufacturers approved to this specification. Lic
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-9364-N008 N010-1978 BS 9364 N008 N010 1978
链接地址:https://www.31doc.com/p-3736594.html