BS-AU-1C-1989 ISO-337-1981.pdf
《BS-AU-1C-1989 ISO-337-1981.pdf》由会员分享,可在线阅读,更多相关《BS-AU-1C-1989 ISO-337-1981.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD AUTOMOBILE SERIES BS AU 1c:1989 ISO 337:1981 (Superseding BS AU 1b:1977) Specification for Dimensions of “50” fifth wheel king pin for semi-trailers ISO title: Road vehicles 50 semi-trailer fifth wheel coupling pin Basic and mounting/interchangeability dimensions UDC 629.114.3.011.7
2、:(083.3) Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:05:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 1c:1989 This British Standard, having been prepared under the direction of the Automobile Standards Committee, was published under the authority of
3、 the Board of BSI and comes into effect on 31 March 1989 BSI 02-2000 The following BSI references relate to the work on this standard: Committee reference AUE/13 Draft for comment 76/73553 DC ISBN 0 580 16872 7 Committees responsible for this British Standard The preparation of this British Standard
4、 was entrusted by the Automobile Standards Committee (AUE/-) to Technical Committee AUE/13 upon which the following bodies were represented: British Railways Board Department of Transport (Highways) Freight Transport Association Health and Safety Executive Institute of Road Transport Engineers Londo
5、n Regional Transport Ministry of Defence National Bus Company Road Haulage Association Society of Motor Manufacturers and Traders Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:05:09 GMT+00:00
6、 2006, Uncontrolled Copy, (c) BSI BS AU 1c:1989 BSI 02-2000i Contents Page Committees responsibleInside front cover National forewordii 1Scope and field of application1 2Reference1 3Basic functional dimensions of pin1 4Dimensional characteristics for mounting and interchangeability2 Figure 11 Figure
7、 22 Figure 32 Publications referred toInside back cover Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:05:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 1c:1989 ii BSI 02-2000 National foreword This revision of BS AU 1 has been prepared under the direct
8、ion of the Automobile Standards Committee and is identical with ISO 337:1981 “Road vehicles 50 semi-trailer fifth wheel coupling pin Basic and mounting/interchangeability dimensions” published by the International Organization for Standardization (ISO). This revision supersedes BS AU 1b:1977 which i
9、s withdrawn. Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a British Standard without deviation. Some terminology and certain conventions are not identical with those used in British Standards; attention is drawn especially to th
10、e following. The comma has been used as a decimal marker. In British Standards it is current practice to use a full point on the baseline as the decimal marker. Wherever the words “International Standard” appear, referring to this standard, they should be read as “British Standard”. Cross-reference.
11、 The Technical Committee has reviewed the provisions of ISO 4086, to which reference is made in the text, and has decided that they are acceptable for use in conjunction with this standard. A British Standard does not purport to include all the necessary provisions of a contract. Users of British St
12、andards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 and 2, an inside back cover and a back cover. Th
13、is standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:05:09 GMT+00:00 2006, Uncontrolled Copy, (c) B
14、SI BS AU 1c:1989 BSI 02-20001 1 Scope and field of application This International Standard specifies the dimensions of the 50 50,8 mm (2 in) fifth wheel coupling pin which is used for coupling semi-trailers to prime movers, taking into account the limitations of weight generally laid down by officia
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-AU-1C-1989 ISO-337-1981 BS AU 1989 ISO 337 1981
链接地址:https://www.31doc.com/p-3736635.html