BS-AU-195A-1991 ISO-4009-1989.pdf
《BS-AU-195A-1991 ISO-4009-1989.pdf》由会员分享,可在线阅读,更多相关《BS-AU-195A-1991 ISO-4009-1989.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS AU 195a:1991 ISO 4009:1989 Specification for Mounting electrical connections on rear cross members of towing vehicles Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:07:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 195a:1991 This Bri
2、tish Standard, having been prepared under the direction of the Automobile Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 30 April 1991 BSI 02-2000 First published January 1984 Second edition April 1991 The following BSI references relate
3、 to the work on this standard: Committee reference AUE/13 Special announcement in BSI News December 1990 ISBN 0 580 19424 8 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Automobile Standards Policy Committee to Technical Committee AUE/
4、13, upon which the following bodies were represented: British Railways Board Bus and Coach Council Department of Transport Freight Transport Association Health and Safety Executive Institute of Road Transport Engineers (Incorporated) London Regional Transport Ministry of Defence Road Haulage Associa
5、tion Ltd. Society of Motor Manufacturers and Traders Limited Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:07:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 195a:1991 BSI 02-2000i Contents Page C
6、ommittees responsibleInside front cover National forewordii 1Scope1 2Normative references1 3Location of electrical connections1 Figure 1 Rear view of towing vehicle2 Publication(s) referred toInside back cover Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:0
7、7:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 195a:1991 ii BSI 02-2000 National foreword This British Standard has been prepared under the direction of the Automobile Standards Policy Committee and is identical with ISO 4009 Towing vehicles Mounting electrical connections on rear cross-membe
8、rs published by the International Organization for Standardization (ISO). The Technical Committee has reviewed the provisions ISO 1176, ISO 1724, ISO 1728, ISO 3731, ISO 3732 and ISO 7638, to which reference is made in the text and has decided that they are acceptable for use in conjunction with thi
9、s standard. The following standards are related. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal oblig
10、ations. Cross-reference International StandardCorresponding British Standard ISO 1185:1975BS AU 197:1984 Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 N (normal) (Technically equivalent) ISO 1724:1980BS AU 149a:1980 Specificatio
11、n for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal) ISO 3731:1980BS AU 198:1984 Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 S (supplementary) ISO 3732:198
12、2BS AU 177a:1980 Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 and 2, an inside back cover and a bac
13、k cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:07:08 GMT+00:00 2006, Uncontrolled
14、Copy, (c) BSI BS AU 195a:1991 BSI 02-20001 1 Scope This International Standard specifies the locations on towing vehicle rear cross-members for the coupling devices which ensure electrical connections with towed vehicles. It applies to the following electrical coupling devices: types 12 N and 24 N c
15、onnections according to ISO 1185 and ISO 1724; types 12 S and 24 S connections according to ISO 3731 and ISO 3732; anti-lock device connections according to ISO 7638. The requirements of this International Standard apply to those towing vehicles normally used for international commercial road transp
16、ort coupled to towed vehicles the “maximum design towed mass”1) of which is greater than 3.5 t. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-AU-195A-1991 ISO-4009-1989 BS AU 195 1991 ISO 4009 1989
链接地址:https://www.31doc.com/p-3736669.html