BS-AU-50-1.1.1C-2001 ISO-4000-1-2001.pdf
《BS-AU-50-1.1.1C-2001 ISO-4000-1-2001.pdf》由会员分享,可在线阅读,更多相关《BS-AU-50-1.1.1C-2001 ISO-4000-1-2001.pdf(42页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD AUTOMOBILE SERIES BS AU 50-1.1.1c:2001 ISO 4000-1:2001 Passenger car tyres and rims Part 1: Tyres (metric series) ICS 83.160.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: London South Bank University, London South Bank University, Sat Dec 0
2、9 02:13:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 50-1.1.1c:2001 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 17 January 2002 BSI
3、17 January 2002 ISBN 0 580 36750 9 National foreword This British Standard reproduces verbatim ISO 4000-1:2000 and implements it as the UK national standard. It supersedes BS AU 50-1.1.1b:1996 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee AUE/4, Tyr
4、es and wheels for motor vehicles, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI
5、 Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are respons
6、ible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep t
7、he UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 34, a blank page and a back cover. The BSI copyright date dis
8、played in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:13:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Reference number ISO 4000-1:2001(E)
9、 OSI 1002 INTERNATIONAL STANDARD ISO 4000-1 Seventh edition 2001-12-15 Passenger car tyres and rims Part 1: Tyres (metric series) Pneumatiques et jantes pour voitures particulires Partie 1: Pneumatiques (srie millimtrique) Licensed Copy: London South Bank University, London South Bank University, Sa
10、t Dec 09 02:13:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:13:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 4000-1:2001(E) iii ContentsPage Foreword.iv 1Scope 1 2Normative references1 3Terms and definit
11、ions .1 4Designation 1 4.1Size and construction .1 4.2Service description3 4.3Other service characteristics .3 5Marking.5 6Tyre dimensions 6 6.1Rounding values6 6.2Calculation of design tyre dimensions6 6.3Calculation of maximum overall (grown) tyre dimensions in service tyres mounted on their measu
12、ring rims7 6.4Calculation of minimum tyre dimensions for radial ply tyres mounted on their measuring rims 8 6.5Range of approved rims8 7Tyre dimension presentation8 8Tyre dimension measurement procedure.9 9Inflation pressures.9 10Load capacities9 11Choice of tyre sizes.9 12Camber angle.10 Annex A (n
13、ormative)Guideline values for metric-series tyres .11 Annex B (normative) Load capacity indices for passenger car tyres .20 Annex C (normative) Minimum inflation pressure for intermediate load28 Annex D (normative) Marking of radial tyres designed for vehicles with maximum speeds above 240 km/h32 An
14、nex E (informative) Other existing size markings.33 Bibliography34 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:13:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 4000-1:2001(E) iv Foreword ISO (the International Organization for Standardization) is a wo
15、rldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented o
16、n that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted
17、 in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. At
18、tention is drawn to the possibility that some of the elements of this part of ISO 4000 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 4000-1 was prepared by Technical Committee ISO/TC 31, Tyres, rims an
19、d valves, Subcommittee SC 3, Passenger car tyres and rims. This seventh edition cancels and replaces the sixth edition (ISO 4000-1:1995), which has been technically revised. ISO 4000 consists of the following parts, under the general title Passenger car tyres and rims: ?Part 1: Tyres (metric series)
20、 ?Part 2: Rims Annexes A to D form a normative part of this part of ISO 4000. Annex E is for information only. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:13:33 GMT+00:00 2006, Uncontrolled Copy, (c) BSI INTERNATIONAL STANDARDISO 4000-1:2001(E) 1 Passenge
21、r car tyres and rims Part 1: Tyres (metric series) 1Scope This part of ISO 4000 specifies the designation, dimensions and load ratings of metric-series tyres primarily intended for passenger cars. 2Normative references The following normative documents contain provisions which, through reference in
22、this text, constitute provisions of this part of ISO 4000. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 4000 are encouraged to investigate the possibility of applying the most recent
23、editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 3877-1, Tyres, valves and tubes List of equivalent terms Part 1: Ty
24、res. ISO 4000-2, Passenger car tyres and rims Part 2: Rims. ISO 4223-1, Definitions of some terms used in the tyre industry Part 1: Pneumatic tyres. 3Terms and definitions For the purposes of this part of ISO 4000, the terms and definitions given in ISO 4223-1. For other terms used in this field, to
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-AU-50-1.1.1C-2001 ISO-4000-1-2001 BS AU 50 1.1 2001 ISO 4000
链接地址:https://www.31doc.com/p-3736707.html