BS-A-306-1994 ISO-8280-1993.pdf
《BS-A-306-1994 ISO-8280-1993.pdf》由会员分享,可在线阅读,更多相关《BS-A-306-1994 ISO-8280-1993.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS A 306:1994 ISO 8280:1993 Rivets, solid, universal head, metallic material, with or without surface treatment Dimensions UDC 621.884:629.7 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A
2、 306:1994 This British Standard, having been prepared under the direction of the Aerospace Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 August 1994 BSI 01-2000 The following BSI references relate to the work on this standard: Commit
3、tee reference ACE/12 Draft for comment 91/82708 DC ISBN 0 580 23220 4 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Aerospace Standards Policy Committee (ACE/-) to Technical Committee ACE/12, upon which the following bodies were repres
4、ented: The Association of Electronics, Telecommunications and Business Equipment Industries British Industrial Fastners Federation Ministry of Defence Society of British Aerospace Companies Ltd. Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, Lon
5、don South Bank University, Sat Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 306:1994 BSI 01-2000i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2Normative reference1 3Configuration and dimensions1 Figure 11 Table 1 Dimensions (except length L1)
6、2 Table 2 Lengths L1 for rivets in aluminium and aluminium alloys3 Table 3 Lengths L1 for rivets in nickel alloys, corrosion-resistant steels, commercially pure titanium and titanium alloys4 List of referencesInside back cover Licensed Copy: London South Bank University, London South Bank University
7、, Sat Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 306:1994 ii BSI 01-2000 National foreword This British Standard has been prepared under the direction of the Aerospace Standards Policy Committee. It is identical with ISO 8280:1993 Aerospace Rivets, solid, universal head, metalli
8、c material, with or without surface treatment Dimensions published by the International Organization for Standardization (ISO). A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Complia
9、nce with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International StandardCorresponding British Standard ISO 286-2:1988BS EN 20286 ISO system of limits and fits Part 2:1992 Tables of standard tolerance grades and limit deviations for holes and shaft
10、s (Identical) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment tabl
11、e on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 306:1994 BSI 01-20001 1 Scope This International Standard specifies the dimensions of universal head solid rivets, in metallic m
12、aterial, with or without surface treatment. It is intended for the drawing up of aerospace product standards. 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the
13、edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently
14、 valid International Standards. ISO 286-2:1988, ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts. 3 Configuration and dimensions See Figure 1 and Table 1 to Table 3. Dimensions and tolerances are expressed in millimetres. They are ap
15、plicable after any surface treatment. 1) The Length range is limited (see Table 2 and Table 3). 2) Drill start option, only for corrosion-resistant steel, nickel alloys, commercially pure titanium, titanium alloys. Figure 1 Licensed Copy: London South Bank University, London South Bank University, S
16、at Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 306:1994 2 BSI 01-2000 Table 1 Dimensions (except length L1) Diameter code D1aD2D3D4HL2L3R1R2 d11bmax.min.max.min.max.min.max.min.max.min. 0,08 0161,63,363,041,61,20,90,7 1,4 2 0,15 02024,23,82,01,51,10,92,4 0252,55,254,752,51,82,01,
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-A-306-1994 ISO-8280-1993 BS 306 1994 ISO 8280 1993
链接地址:https://www.31doc.com/p-3736817.html