BS-EN-10217-6-2002.pdf
《BS-EN-10217-6-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-10217-6-2002.pdf(38页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10217-6:2002 Incorporating Amendment No. 1 Welded steel tubes for pressure purposes Technical delivery conditions Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties The European Standard EN 10217-6:2002, with the incorporation of amend
2、ment A1:2005, has the status of a British Standard ICS 23.040.10; 77.140.75 ? BS EN 10217-6:2002 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 26 June 2002 BSI 14 February 2006 ISBN 0 580 39846 3 National foreword This British Standard is t
3、he official English language version of EN 10217-6:2002, including amendment A1:2005. The start and finish of text introduced or altered by CEN amendment is indicated in the text by tags !“. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN a
4、mendment A1 is indicated by !“. The UK participation in its preparation was entrusted by Technical Committee ISE/73, Steels for pressure purposes, to Subcommittee ISE/73/1, Steel tubes for pressure purposes, which has the responsibility to: A list of organizations represented on this subcommittee ca
5、n be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search”
6、facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users of this publication are responsible for their correct application. Compliance with a British Standard does not of itself confer immu
7、nity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them
8、 in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 34, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd.
9、No. DateComments 1546814 February 2006 See national foreword EN 10217-6 May 2002 + A1 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM January 2005 ICS 23.040.10; 77.140.75 English version Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-al
10、loy steel tubes with specified low temperature properties (includes amendment A1:2005) Tubes souds en acier pour service sous pression - Conditions techniques de livraison - Partie 6: Tubes souds larc immerg sous flux en poudre en acier non alli avec caractristiques spcifies basse temprature (inclut
11、 lamendement A1:2005) Geschweite Stahlrohre fr Druckbeanspruchungen - Technische Lieferbedingungen - Teil 6: Unterpulvergeschweite Rohre aus unlegierten Sthlen mit festgelegten Eigenschaften bei tiefen Temperaturen (enthlt nderung A1:2005) This European Standard was approved by CEN on 25 April 2002.
12、 Amendment A1 was apprved by CEN on 9 December 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references co
13、ncerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own
14、 language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg
15、, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CEN All rights of exploi
16、tation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10217-6:2002 + A1:2005 E Contents Foreword3 1 Scope5 2 Normative references5 3 Terms and definitions .6 4 Symbols6 5 Classification and designation.7 5.1 Classification7 5.2 Designation 7 6 Information to be
17、 supplied by the purchaser .7 6.1 Mandatory information7 6.2 Options .7 6.3 Example of an order 8 7 Manufacturing process .8 7.1 Steelmaking process.8 7.2 Deoxidation process .8 7.3 Tube manufacture and delivery conditions8 8 Requirements.10 8.1 General10 8.2 Chemical composition 10 8.3 Mechanical p
18、roperties.12 8.4 Appearance and internal soundness.12 8.5 Straightness.13 8.6 Preparation of ends.13 8.7 Dimensions, masses and tolerances.14 9 Inspection.17 9.1 Types of inspection.17 9.2 Inspection documents.17 9.3 Summary of inspection and testing.18 10 Sampling.19 10.1 Frequency of tests.19 10.2
19、 Preparation of samples and test pieces20 11 Test methods21 11.1 Chemical analysis21 11.2 Tensile test on the base material.21 11.3 Tranverse tensile test on the weld.21 11.4 Weld bend test .22 11.5 Impact test22 11.6 Hydrostatic leak tightness test.22 11.7 Dimensional inspection 23 11.8 Visual exam
20、ination 23 11.9 Non-Destructive Testing .23 11.10 Retests, sorting and reprocessing.24 12 Marking.24 12.1 Marking to be applied24 12.2 Additional marking 24 13 Protection.25 Annex A (normative).26 Annex ZA (informative) 33 Bibliography34 2 EN 102127-6:2002 (E) EN 10217-6:2002 (E) 3 Foreword This doc
21、ument (EN 10217-6:2002) has been prepared by Technical Committee ECISS/TC 29, “Steel tubes and fittings for steel tubes“, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at
22、 the latest by November 2002, and conflicting national standards shall be withdrawn at the latest by November 2002. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).
23、 For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document. Other parts of EN 10217 are: Part 1: Non-alloy steel tubes with specified room temperature properties. Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated tempera
24、ture properties. Part 3: Alloy fine grain steel tubes. Part 4: Electric welded non-alloy steel tubes with specified low temperature properties. Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties. Part 7: Stainless steel tubes. Another European
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10217 2002
链接地址:https://www.31doc.com/p-3736850.html