BS-EN-10264-2-2002.pdf
《BS-EN-10264-2-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-10264-2-2002.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10264-2:2002 Steel wire and wire products Steel wire for ropes Part 2: Cold drawn non alloy steel wire for ropes for general applications The European Standard EN 10264-2:2002 has the status of a British Standard ICS 77.140.65 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMIT
2、TED BY COPYRIGHT LAW BS EN 10264-2:2002 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 18 April 2002 BSI 18 April 2002 ISBN 0 580 39504 9 Nati
3、onal foreword This British Standard is the official English language version of EN 10264-2:2002. Together with BS EN 10264-1:2001 and BS EN 10264-3 it supersedes BS 2763:1982, which will be withdrawn when BS EN 10264-3 is published. The UK participation in its preparation was entrusted to Technical
4、Committee ISE/26, Steel wire, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in
5、 the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are
6、 responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK
7、interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 10, an inside back cover and a back cover. The BSI copyright date displayed in this
8、document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10264-2 March 2002 ICS 77.140.65 English version Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy ste
9、el wire for ropes for general applications Fils et produits trfils en acier - Fils pour cbles - Partie 2: Fil croui froid par trfilage en acier non alli pour cbles dusage courant Stahldraht und Drahterzeugnisse - Stahldraht fr Seile - Teil 2: Kaltgezogener Draht aus unlegiertem Stahl fr Seile fr all
10、gemeine Verwendungszwecke This European Standard was approved by CEN on 20 January 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lis
11、ts and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons
12、ibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta,
13、Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means re
14、served worldwide for CEN national Members. Ref. No. EN 10264-2:2002 E EN 10264-2:2002 (E) 2 Contents page Foreword. 3 1Scope . 4 2Normative references . 4 3Product designation . 4 4General conditions of manufacture 5 5Characteristics of wire . 5 5.1Tensile strength grades . 5 5.2Requirements for wir
15、e characteristics 6 6Test methods. 10 6.1General. 10 6.2Measurement of diameter 10 6.3Tensile test 10 6.4Reverse bend test. 10 6.5Torsion test 10 6.6Inspection of zinc or Zn95/Al5 alloy coating 10 EN 10264-2:2002 (E) 3 Foreword This document (EN 10264-1:2002) has been prepared by Technical Committee
16、 ECISS/TC 30 “Steel wires“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2002, and conflicting national standards shall be withdrawn at the la
17、test by September 2002. This European Standard for wire for ropes is made up of the following parts: Part 1:General requirements Part 2: Cold drawn non alloy steel wire for ropes for general applications Part 3:Cold drawn and cold shaped non alloy steel wire for high duty applications Part 4:Stainle
18、ss steel wire According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Net
19、herlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. EN 10264-2:2002 (E) 4 1 Scope This part of this European Standard defines cold drawn non alloy steel wire used for the manufacture of: ? Ropes for general applications and lifts; ? Ropes for applications for which there i
20、s no specific EN standard. This part of this standard does not apply to steel wire taken from manufactured ropes. This part of this European standard specifies the following for cold drawn non alloy steel wire for ropes for general applications: ? dimensional tolerances; ? mechanical characteristics
21、; ? requirements relating to the chemical composition of the steel wire; ? conditions to be satisfied by any coating. In addition to the requirements of this part of this European standard, the requirements of prEN 10264-1 also apply. 2 Normative references This European Standard incorporates by dat
22、ed or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard o
23、nly when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 10016-1, Non-alloy steel rod for drawing and/or cold rolling Part 1: General requirements. EN 10016-2, Non alloy steel rod for drawing and
24、/or cold rolling Part 2: Specific requirements for general purposes rod. EN 10218-1, Steel wire and wire products General Part 1: Test methods. EN 10244-2, Steel wire and wire products Non ferrous metallic coatings on steel wire Part 2: Zinc or zinc alloy coatings. EN 10264-1, Steel wire and wire pr
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10264 2002
链接地址:https://www.31doc.com/p-3736865.html