BS-AU-50-1.5.5-1998 ISO-10499-2-1998.pdf
《BS-AU-50-1.5.5-1998 ISO-10499-2-1998.pdf》由会员分享,可在线阅读,更多相关《BS-AU-50-1.5.5-1998 ISO-10499-2-1998.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD AUTOMOBILE SERIES BS AU 50-1-5.5:1998 ISO 10499-2: 1998 Tyres and wheels Part 1: Tyres Section 5: Industrial vehicle tyres Subsection 5.5: Specification for solid tyres (metric series) for pneumatic tyre rims: Load ratings ICS 43.040.50; 83.160.10 Licensed Copy: London South Bank Un
2、iversity, London South Bank University, Sat Dec 09 02:11:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 50-1-5.5:1998 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect o
3、n 15 September 1998 BSI 04-1999 ISBN 0 580 29971 6 National foreword This British Standard reproduces verbatim ISO 10499-2:1998 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee AUE/4, Tyres and wheels for motor vehicles, whic
4、h has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them
5、 in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section enti
6、tled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Complia
7、nce with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the ISO title page, pages ii to iv, pages 1 to 3 and a back cover. This standard has been updated (see copyright date)
8、 and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:11:22 GMT+00:00 2006, Uncontrolled Cop
9、y, (c) BSI BS AU 50-1-5.5:1998 BSI 04-1999i Contents Page National forewordInside front cover Forewordiii Text of ISO 10499-21 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:11:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: London Sout
10、h Bank University, London South Bank University, Sat Dec 09 02:11:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:11:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 50-1-5.5:1998 ii BSI 04-1999 Contents Page F
11、orewordiii 1Scope1 2Normative references1 3Definitions1 4Tyre designations1 5Marking1 6Reference speed1 7Tyre load-carrying capacities1 Table 1 Correlation between load index (LI) and tyres load-carrying capacity (TLCC)2 Table 2 Correlation between speed symbols and speed category3 Table 3 Tyre load
12、 capacity ratings for A5 tyres on rims with diameter codes up to and including 15 on counterbalanced lift trucks3 Table 4 Tyre load capacity ratings for A5 tyres on rims with diameter codes up to and including on other vehicles in intermittent service3 Licensed Copy: London South Bank University, Lo
13、ndon South Bank University, Sat Dec 09 02:11:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 50-1-5.5:1998 BSI 04-1999iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Internatio
14、nal Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO
15、, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Inte
16、rnational Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 10499-2 was prepared by Technical Committee ISO/TC 31, Tyres, rims and valves, Subcommittee SC 7, Industrial tyres and rims. ISO 10499 consists of the following parts, under the gene
17、ral title Industrial tyres and rims Rubber solid tyres (metric series) for pneumatic tyre rims: Part 1: Designation, dimensions and marking; Part 2: Load ratings. Descriptors: Machinery, self-propelled machines, tyres, rubber products, solid tyres, specifications, load capacity, designation, marking
18、, metric system. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:11:22 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv blank Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:11:22 GMT+00:00 2006, Uncontrolled Copy, (c) BS
19、I BS AU 50-1-5.5:1998 BSI 04-19991 1 Scope This part of ISO 10499 specifies the load ratings of the metric series of rubber solid tyres for pneumatic tyre rims primarily intended for industrial vehicles for use on prepared surfaces. Designation, dimensions and marking are covered in ISO 10499-1; rim
20、 contours fitting these tyres are specified in ISO 3739-3. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are s
21、ubject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 3739-3:199
22、5, Industrial tyres and rims Part 3: Rims. ISO 3877-4:1984, Tyres, valves and tubes List of equivalent terms Part 4: Solid tyres. ISO 4223-2:1991, Definitions of some terms used in the tyre industry Part 2: Solid tyres. ISO 5053:1987, Powered industrial trucks Terminology. ISO 10499-1:1991, Industri
23、al tyres and rims Rubber solid tyres (metric series) for pneumatic tyre rims Part 1: Designation, dimensions and marking. 3 Definitions For the purposes of this part of ISO 10499, the definitions given in ISO 3877-4, ISO 4223-2 and ISO 5053 apply. 4 Tyre designations 4.1 Dimensional and construction
24、al characteristics See ISO 10499-1. 4.2 Service descriptions The service description shall be indicated as follows: 4.2.1 Load index The load index is a numerical code associated with the maximum load a tyre can carry at the speed indicated by its speed symbol, under the service conditions specified
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-AU-50-1.5.5-1998 ISO-10499-2-1998 BS AU 50 1.5 1998 ISO 10499
链接地址:https://www.31doc.com/p-3736882.html