BS-EN-10305-6-2005.pdf
《BS-EN-10305-6-2005.pdf》由会员分享,可在线阅读,更多相关《BS-EN-10305-6-2005.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10305-6:2005 Incorporating corrigendum no. 1 Steel tubes for precision applications Technical delivery conditions Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems The European Standard EN 10305-6:2005 has the status of a British Standard ICS 77.140.75
2、? Licensed Copy: London South Bank University, London South Bank University, Sat Aug 18 09:49:34 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 10305-6:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 27 June 2005 BSI 2007 ISBN 978 0 58
3、0 59327 7 National foreword This British Standard is the UK implementation of EN 10305-6:2005. Together with BS EN 10305-2:2002 and BS EN 10305-3:2002 it supersedes BS EN 6323-6:1982 which is withdrawn. Together with BS EN 10296-1:2003, BS EN 10296-2:2005, BS EN 10297-1:2003, BS EN 10305-1:2002, BS
4、EN 10305-2:2002, BS EN 10305-3:2002, BS EN 10305-4:2003 and BS EN 10305-5:2003 it supersedes BS 6323-1:1982 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/8, Steel pipes. A list of organizations represented on this committee can be obtained on re
5、quest to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComme
6、nts 17260 Corrigendum No. 1 31 August 2007Revision of supersession details Licensed Copy: London South Bank University, London South Bank University, Sat Aug 18 09:49:34 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10305-6 May 2005 ICS 77.140.75 Eng
7、lish version Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems Tubes de prcision en acier - Conditions techniques de livraison - Partie 6 : Tubes souds tirs froid pour circuits hydrauliques et pneumatiqu
8、es Przisionsstahlrohre - Technische Lieferbedingungen - Teil 6: Geschweite kaltgezogene Rohre fr Hydraulik- und Pneumatik-Druckleitungen This European Standard was approved by CEN on 28 February 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condi
9、tions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three
10、official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austr
11、ia, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZ
12、ATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10305-6:2005: E Licensed Copy: London South Bank Univers
13、ity, London South Bank University, Sat Aug 18 09:49:34 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 10305-6:2005 (E) 2 ContentsPage Foreword 3 1Scope.4 2Normative references .4 3Terms and definitions.4 4Symbols.5 5Classification and designation 5 6Information to be supplied by the purchaser5 7Manuf
14、acturing process.6 8Requirements7 9Inspection13 10Sampling15 11Test methods.16 12Marking18 13Protection and packaging 18 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of 97/23/EC19 Bibliography.20 Licensed Copy: London South Bank University, London
15、 South Bank University, Sat Aug 18 09:49:34 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 10305-6:2005 (E) 3 Foreword This document (EN 10305-6:2005) has been prepared by Technical Committee ECISS/TC 29 “Steel tubes and fittings for steel tubes”, the secretariat of which is held by UNI/UNSIDER. This
16、 European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2005, and conflicting national standards shall be withdrawn at the latest by November 2005. This document has been prepared under a mandate giv
17、en to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive (97/23/EC). For relationship with EU Directive (97/23/EC), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Reg
18、ulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
19、Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. This document includes a bibliography. EN 10305 consists of the following parts under the general title Steel tubes for precision applications - Technical delivery conditions: Part 1: Seamless cold drawn
20、 tubes Part 2: Welded cold drawn tubes Part 3: Welded cold sized tubes Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems Part 5: Welded and sized square and rectangular tubes Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems Licensed Copy: London Sou
21、th Bank University, London South Bank University, Sat Aug 18 09:49:34 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 10305-6:2005 (E) 4 1 Scope This Part of EN 10305 specifies the technical delivery conditions for welded cold drawn tubes of circular cross section for use in hydraulic and pneumatic po
22、wer systems. Tubes according to this Part of EN 10305 are characterized by having precisely defined tolerances on dimensions and a specified surface roughness. The allowed pressure rates and temperatures are the responsibility of the customer in accordance with the state of the art and in the applic
23、ation of the safety coefficients specified in the applicable regulations, codes or standards. 2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and
24、 the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of those publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (in
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10305 2005
链接地址:https://www.31doc.com/p-3736889.html