BS-EN-12003-2008.pdf
《BS-EN-12003-2008.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12003-2008.pdf(14页珍藏版)》请在三一文库上搜索。
1、BS EN 12003:2008 ICS 83.180; 91.100.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Adhesive for tiles Determination of shear adhesion strength of reaction resin adhesives Licensed CopyChinese University of Hong Kong, 12/06/2009 03:06, Uncontrolled Copy, (c
2、) BSI This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2009 BSI 2009 ISBN 978 0 580 61306 7 Amendments/corrigenda issued since publication DateComments BS EN 12003:2008 National foreword This British Standard is the UK implementation of
3、 EN 12003:2008. It supersedes BS EN 12003:1998 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/539, Ceramic tiles and other rigid tiling. A list of organizations represented on this committee can be obtained on request to its secretary. This publica
4、tion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Licensed CopyChinese University of Hong Kong, 12/06/2009 03:06, Uncontrolled Copy, (c) BSI
5、 BS EN 12003:2008 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12003 October 2008 ICS 91.100.10Supersedes EN 12003:1997 English Version Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives Colles carrelage - Dtermination de ladhrence par cisaillement des
6、colles ractives Mrtel und Klebstoffe fr Fliesen und Platten - Bestimmung der Scherfestigkeiten von Reaktionsharz-Klebstoffen This European Standard was approved by CEN on 22 August 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givi
7、ng this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official ver
8、sions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgiu
9、m, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR S
10、TANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12003:2008: E Licensed CopyChinese University o
11、f Hong Kong, 12/06/2009 03:06, Uncontrolled Copy, (c) BSI BS EN 12003:2008 EN 12003:2008 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Sampling.4 4 Test conditions 4 5 Test materials.4 5.1 General4 5.2 Ceramic tiles.5 6 Apparatus .5 6.1 Template.5 6.2 Spacer.6 6.3 Weight.6 6.4 Te
12、st machine6 6.5 Shear test jig 6 7 Test methods8 7.1 Mixing of adhesive.8 7.2 Preparation of test pieces.8 7.3 Initial shear adhesion strength.9 7.4 Shear adhesion strength after water immersion9 7.5 Shear adhesion strength after thermal shock 9 8 Evaluation and expression of results9 9 Test report9
13、 Licensed CopyChinese University of Hong Kong, 12/06/2009 03:06, Uncontrolled Copy, (c) BSI BS EN 12003:2008 EN 12003:2008 (E) 3 Foreword This document (EN 12003:2008) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This European Standard
14、shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by April 2009. Attention is drawn to the possibility that some of the elements of this docu
15、ment may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12003:1997. This document is one of a series of European Standards for tests on tile adhesives including: EN 1308, Adhesives for tiles
16、 Determination of slip EN 1323, Adhesives for tiles Concrete slabs for tests EN 1324, Adhesives for tiles Determination of shear adhesion strength of dispersion adhesives EN 1346, Adhesives for tiles Determination of open time EN 1347, Adhesives for tiles Determination of wetting capability EN 1348,
17、 Adhesives for tiles Determination of tensile adhesion strength for cementitious adhesives EN 12002, Adhesives for tiles Determination of transverse deformation for cementitious adhesives and grouts EN 12003, Adhesives for tiles Determination of shear adhesion strength of reaction resin adhesives EN
18、 12004, Adhesives for tiles Requirements, evaluation of conformity, classification and designation EN 12808-1, Grouts for tiles Part 1: Determination of chemical resistance of reaction resin mortars According to the CEN/CENELEC Internal Regulations, the national standards organizations of the follow
19、ing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slove
20、nia, Spain, Sweden, Switzerland and the United Kingdom. Licensed CopyChinese University of Hong Kong, 12/06/2009 03:06, Uncontrolled Copy, (c) BSI BS EN 12003:2008 EN 12003:2008 (E) 4 1 Scope This European Standard specifies the test method to be used to determine the shear adhesion strength of reac
21、tion resin ceramic tile adhesives. This European Standard is applicable to all reaction resin ceramic tile adhesives for internal and external tile installations on floors and walls. This European Standard does not contain performance requirements or recommendations for the design and installation o
22、f ceramic tiles. NOTE Ceramic tile adhesives can also be used for other kinds of tiles (natural and agglomerated stones, etc.), where these do not adversely affect the stones. This European Standard can involve hazardous materials and operations. Persons using this European Standard should be famili
23、ar with normal laboratory practice. This European Standard does not purport to address all the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any European and national regulator
24、y conditions. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1067, Adh
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 12003 2008
链接地址:https://www.31doc.com/p-3736914.html