BS-EN-10088-2-1995.pdf
《BS-EN-10088-2-1995.pdf》由会员分享,可在线阅读,更多相关《BS-EN-10088-2-1995.pdf(46页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10088-2:1995 Stainless steels Part 2: Technical delivery conditions for sheet/plate and strip for general purposes The European Standard EN 10088-2:1995 has the status of a British Standard ICS 77.140.20; 77.140.50 BS EN 10088-2:1995 This British Standard, having been prepared
2、 under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 November 1995 BSI 11-1998 The following BSI references relate to the work on this standard: Committee reference ISE/31 Draft for comment 93/305486 DC ISBN 0 580
3、24672 8 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee ISE/31, Wrought steels, upon which the following bodies were represented: Associated Offices Technical Committee British Chain Manufacturers Association British Coal
4、 Corporation British Forging Industry Association British Industrial Fasteners Federation British Railways Board British Steel Industry Cold Rolled Sections Association Department of Trade and Industry (National Physical Laboratory) Engineering Industries Association Federation of British Engineers
5、Tool Manufacturers Lloyds Register of Shipping Ministry of Defence National Association of Steel Stockholders Road Vehicle Spring Society Society of Motor Manufacturers and Traders Limited Stainless Steel Fabricators Association of Great Britain Amendments issued since publication Amd. No.DateCommen
6、ts BS EN 10088-2:1995 BSI 11-1998i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 10088-25 List of referencesInside back cover BS EN 10088-2:1995 ii BSI 11-1998 National foreword This Part of BS EN 10088 has been prepared by Technical Committee ISE/31
7、 and is the English language version of EN 10088-2 Stainless steels Part 2: Technical delivery conditions for sheet/plate and strip for general purposes published by the European Committee for Standardization (CEN). This Part of BS EN 10088 partially supersedes BS 1449-2:1983, which has been amended
8、. Cross-references Publication referred toCorresponding British Standard BS EN 10002 Tensile testing of metallic materials EN 10002-1:1990Part 1:1990 Method of test at ambient temperature EN 10002-5:1991Part 5:1992 Method of test at elevated temperatures EN 10021:1993BS EN 10021:1993 General technic
9、al delivery requirements for steel and iron products BS EN 10027 Designation systems for steel EN 10027-1:1992Part 1:1992 Steel names, principal symbols EN 10027-2:1992Part 2:1992 Steel numbers EN 10045-1:1990BS EN 10045 Charpy impact test on metallic materials Part 1:1990 Test method (V- and U-notc
10、hes) EN 10052:1993BS EN 10052:1994 Vocabulary of heat treatment terms for ferrous products EN 10079:1992BS EN 10079:1993 Definition of steel products EN 10088-1:1995BS EN 10088 Stainless steels Part 1:1995 List of stainless steels EN 10109-1:1994BS EN 101091) Metallic materials Hardness test Part 1
11、Rockwell test (scales A, B, C, D, E, F, G, H, K) and Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T, 45T) EURONORM 114BS 5903:1980 Method for determination of resistance to intergranular corrosion of austenitic stainless steels: copper sulphate sulphuric acid method (Moneypenny Strauss te
12、st) BS EN 10163 Specification for delivery requirements for surface conditions of hot rolled steel plates, wide flats and sections EN 10163-1:1991Part 1:1991 General requirements EN 10163-2:1991Part 2:1991 Plates and wide flats EN 10204:1991BS EN 10204:1991 Metallic products. Types of inspection doc
13、uments A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document com
14、prises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 40, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.
15、 1) In preparation. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10088-2 April 1995 ICS 77.140.20; 77.140.50 Descriptors: Iron and steel products, hot rolled products, cold rolled products, stainless steels, metal plates, steel strips, delivery, designation, dimensions, dimensional tolerance
16、s, chemical composition, grades: quality, classification, mechanical properties, tests, marking English version Stainless steels Part 2: Technical delivery conditions for sheet/plate and strip for general purposes Aciers inoxydables Partie 2: Conditions techniques de livraison des tles et bandes pou
17、r usage gnral Nichtrostende Sthle Teil 2: Technische Lieferbedingungen fr Blech und Band fr allgemeine Verwendung This European Standard was approved by CEN on 1995-02-28. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europea
18、n Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, F
19、rench, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland
20、, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Bruss
21、els All rights of reproduction and communications in any form and by any means reserved in all countries to CEN and its members Ref. No. EN 10088-2:1995 E EN 10088-2:1995 BSI 11-1998 2 Foreword This European Standard has been prepared by SC 1, Stainless steels, of Technical Committee ECISS/TC 23/SC,
22、 Steels for treatment, alloy steels and free-cutting steels Qualities, of which the secretariat is held by DIN. This European Standard replaces: EU 88-2:1986, Stainless steels Part 2: Technical delivery conditions for sheet/plate and strip for general purposes. This European Standard shall be given
23、the status of a national standard, either by publication of an identical text, or by endorsement, at the latest by October 1995, and conflicting national standards shall be withdrawn at the latest by October 1995. According to the CEN/CENELEC Internal Regulations, the following countries are bound t
24、o implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Contents Page Foreword2 1Scope5 2Normative references5 3Definitions5 3.1 Stainless steel
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10088 1995
链接地址:https://www.31doc.com/p-3736960.html