BS-EN-10323-2004.pdf
《BS-EN-10323-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-10323-2004.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10323:2004 Steel wire and products Bead wire The European Standard EN 10323:2004 has the status of a British Standard ICS 77.140.65 ? Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 04:41:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 10323:2004 This British Standa
2、rd was published under the authority of the Standards Policy and Strategy Committee on 7 September 2004 BSI 7 September 2004 ISBN 0 580 44427 9 National foreword This British Standard is the official English language version of EN 10323:2004. The UK participation in its preparation was entrusted to
3、Technical Committee ISE/26, Steel wire, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may b
4、e found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are
5、 responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and
6、keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 16, an inside back cover and a back cover. The BSI copyright notice disp
7、layed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 04:41:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10323 Septembe
8、r 2004 ICS English version Steel wire and wire products - Bead wire Fils et produits trfils en acier - Fil pour tringleStahldraht und Drahterzeugnisse - Reifeneinlegedraht This European Standard was approved by CEN on 1 July 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulat
9、ions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This Euro
10、pean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the nati
11、onal standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUR
12、OPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10323:2004: E Licensed Cop
13、y: sheffieldun sheffieldun, na, Thu Oct 26 04:41:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 10323:2004 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 Classification5 5 Designation and ordering .5 5.1 Designation 5 5.2 Information to be supplied by
14、the purchaser .5 6 Requirements.6 6.1 Material .6 6.2 Mechanical properties.6 6.3 Surface quality.8 6.4 Dimensions and tolerances9 6.5 Delivery conditions9 7 Testing and inspection10 7.1 Tests and inspection documents.10 7.2 Test procedures.10 7.3 Coating thickness11 7.4 Retests11 8 Marking, labelli
15、ng and packaging11 Annex A (informative) Adhesion testing.13 Annex B (informative) Bead wire.14 Bibliography16 Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 04:41:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 10323:2004 (E) 3 Foreword This document (EN 10323:2004) has been prepared by Te
16、chnical Committee ECISS/TC 30 “Steel wire”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdra
17、wn at the latest by March 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ice
18、land, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 04:41:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 10323:2004 (E) 4 1 Scope
19、 This document specifies composition, dimensions and mechanical properties of round and flat wire used for strengthening the bead of all kinds of tyres. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the ed
20、ition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10002-1, Metallic materials Tensile testing Part 1: Method of test at ambient temperature EN 10016-1, Non-alloy steel rod for drawing and/or cold rolling Part 1: General
21、requirements EN 10016-2, Non-alloy steel rod for drawing and/or cold rolling Part 2: Specific requirements for general purposes rod EN 10016-4, Non-alloy steel rod for drawing and/or cold rolling Part 4: Specific requirements for rod for special applications EN 10021, General technical delivery requ
22、irements for steel and iron products EN 10204, Metallic products Types of inspection documents EN 10218-1, Steel wire and wire products General Part 1: Test methods EN 10218-2, Steel wire and wire products General Part 2: Wire dimensions and tolerances EN 10244-1, Steel wire and wire products Non-fe
23、rrous metallic coatings on steel wire Part 1: General principles CR 10261, ECISS Information circular 11 Iron and steel Review of available methods of chemical analysis 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 nominal diameter: d value
24、 of the diameter, expressed in millimetres, by which the wire is designated and specified by the purchaser NOTE This is the basis on which the values of all relevant characteristics are determined for the acceptance of the wire 3.2 actual diameter arithmetic mean of two measurements of the diameter
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10323 2004
链接地址:https://www.31doc.com/p-3736997.html