BS-EN-10088-2-2005.pdf
《BS-EN-10088-2-2005.pdf》由会员分享,可在线阅读,更多相关《BS-EN-10088-2-2005.pdf(46页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10088-2:2005 Stainless steels Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes The European Standard EN 10088-2:2005 has the status of a British Standard ICS 77.140.20; 77.140.50 ? BS EN 10088-2:2005 This Britis
2、h Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2005 BSI 30 June 2005 ISBN 0 580 46336 2 National foreword This British Standard is the official English language version of EN 10088- 2:2005. It supersedes BS EN 10088-2:1995 which is withdrawn. T
3、he UK participation in its preparation was entrusted to Technical Committee ISE/30, Stainless steels, which has the responsibility to: BS EN 10088 is published in three parts. Two further parts of this series (prEN 10088-4 and prEN 10088-5) are currently in preparation and have been designed to meet
4、 the needs of the Construction Products Directive (CPD). A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the B
5、SI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for
6、 its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK inte
7、rests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 43 and a back cover. The BSI copyright notice displayed in this document indicates when
8、the document was last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10088-2 June 2005 ICS 77.140.20; 77.140.50Supersedes EN 10088-2:1995 English version Stainless steels - Part 2: Technical delivery conditions for sheet/plate
9、and strip of corrosion resisting steels for general purposes Aciers inoxydables - Partie 2: Conditions techniques de livraison des tles et bandes en acier de rsistance la corrosion pour usage gnral Nichtrostende Sthle - Teil 2: Technische Lieferbedingungen fr Blech und Band aus korrosionsbestndigen
10、Sthlen fr allgemeine Verwendung This European Standard was approved by CEN on 4 May 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date li
11、sts and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp
12、onsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irel
13、and, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-10
14、50 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10088-2:2005: E EN 10088-2:2005 (E) 2 Contents Page Foreword 3 1Scope.4 2Normative references .4 3Terms and definitions.5 4Designation and ordering.5 4.1Designation o
15、f steel grades .5 4.2Designation to be used on ordering5 5Classification of grades6 6Requirements7 6.1Steelmaking process 7 6.2Delivery condition.7 6.3Chemical composition7 6.4Chemical corrosion properties 7 6.5Mechanical properties 7 6.6Surface quality 7 6.7Internal soundness.8 6.8Formability at ro
16、om temperature.8 6.9Dimensions and tolerances on dimensions and shape.8 6.10Calculation of mass and tolerances on mass.8 7Inspection and testing8 7.1General 8 7.2Agreement on tests and inspection documents.8 7.3Specific inspection and testing .9 7.4Test methods.9 7.5Retests.10 8Marking10 Annex A (in
17、formative) Guidelines for further treatment (including heat treatment) in fabrication 37 Annex B (informative) Applicable dimensional standards42 Bibliography.43 EN 10088-2:2005 (E) 3 Foreword This document (EN 10088-2:2005) has been prepared by Technical Committee ECISS/TC 23 “Steels for heat treat
18、ment, alloy steels and free-cutting steels - Qualities and dimensions”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2005, and conflicting nati
19、onal standards shall be withdrawn at the latest by December 2005. This document supersedes EN 10088-2:1995. EN 10088, under the general title “Stainless steels“, consists of the following parts: Part 1: List of stainless steels (including a table of European Standards, in which these stainless steel
20、s are further specified, see Annex D), Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes, Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels fo
21、r general purposes. The European Organisation for Standardisation (CEN) draws attention to the fact that it is claimed that compliance with this document may involve the use of patents concerning four steel grades. CEN takes no position concerning the evidence, validity and scope of these patent rig
22、hts. The holder of these patent rights has assured CEN that they are willing to negotiate licenses, under reasonable and non-discriminatory terms and conditions, with applicants throughout the world. In this respect, the statements of the holders of these patent rights are registered with CEN. Infor
23、mation may be obtained from: Grades 1.4362, 1.4410 and 1.4477 Sandvik AB SE-811 81 SANDVIKEN Sweden Grade 1.4652 Outokumpu Stainless AB SE-77480 AVESTA Sweden Attention is drawn to the possibility that some of the elements within this document may be the subject of patent rights other than those ind
24、icated above. CEN shall not be responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germ
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10088 2005
链接地址:https://www.31doc.com/p-3737062.html