BS-EN-12815-2001-A1-2004.pdf
《BS-EN-12815-2001-A1-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12815-2001-A1-2004.pdf(84页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12815:2001 +A1:2004 Incorporating corrigenda September 2003, June 2006 and August 2007 Residential cookers fired by solid fuel Requirements and test methods ICS 97.040.20 ? BS EN 12815:2001+A1:2004 This British Standard was published under the authority of the Standards Policy
2、 and Strategy Committee on 16 August 2003 BSI 2008 ISBN 978 0 580 60009 8 National foreword This British Standard is the UK implementation of EN 12815:2001+A1:2004, incorporating corrigenda September 2003, June 2006 and August 2007. It supersedes BS EN 12815:2001 which is withdrawn. The start and fi
3、nish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. Conflicting national standards will need either to be withdrawn or amended an
4、d these are under consideration in Technical Committee RHE/28. It is the intention of the committee to reach a decision by April 2008 on which course of action will be taken. Attention is drawn to the fact that, on purchase of this standard, BSI provides a colour copy of the browning chart in Annex
5、C as a separate item. The BSI colour copy of the browning chart has been approved by CEN/TC 295 chairman. The UK participation in its preparation was entrusted to Technical Committee RHE/28, Domestic solid mineral fuel appliances. A list of organizations represented on this committee can be obtained
6、 on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication A
7、md. No. DateComments 1548121 January 2005See national foreword 16548 Corrigendum No. 1 31 October 2006Replacement of formula (17) in A.6.2.7.1. Corrections to A.6.2.1.1, A.6.2.9 and EN foreword, amendment A1 30 April 2008Implementation of CEN corrigendum August 2007, addition of Note to 6.3 EUROPEAN
8、 STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12815:2001+A1 September 2004 ICS 97.040.20 English version Residential cookers fired by solid fuel Requirements and test methods Cuisinires domestiques combustible solide Exigences et mthodes dessa Herde fr feste Brennstoffe Anforderungen und Prfung This
9、European Standard was approved by CEN on 7 April 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
10、concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its o
11、wn language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembou
12、rg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CEN All rights of expl
13、oitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12815:2001 E Incorporating corrigenda September 2003, June 2006 and August 2007 Page 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions 5 4 Materials, design and construc
14、tion 11 5 Safety 18 6 Performance 19 7 Appliance instructions 22 8 Marking 24 9 Evaluation of conformity 25 Annex A (normative) Test methods 31 Annex B (normative) Test fuels and recommended fuels 70 Annex C (normative) Browning chart for oven heating test 75 Annex D (informative) Deleted 76 Annex Z
15、A (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive 76 Bibliography 81 Table 1 - Steel material types 13 Table 2 - Minimum mechanical requirements for cast irons 14 Table 3 - Minimum thread size designation of flow and return tappings
16、 14 Table 4 - Minimum depth of tapping or length of thread 14 Table 5 and Table 6 - Deleted 20 Table 7 - Minimum refuelling interval at nominal heat output 21 Table 8 - Minimum refuelling interval at slow combustion 21 Table 9 Characteristics to take account of in deciding family of appliances 27 Ta
17、ble 10 Performance characteristics to take account of in deciding family of appliances 27 Table A.1 - Uncertainty of measurement 34 Table A.2 - Notations and units used in calculations 51 Table B.1 - Test fuel specifications 73 Table B.2 - Typical commercial fuel specifications 74 Table ZA.1 - Relev
18、ant Clauses 77 Table ZA.2 System of attestation of conformity 78 Table ZA.3 - Assignment of evaluation of conformity tasks for Space heating in residential buildings with possible supply of hot water under system 3 78 Figure A.1 - Example of installation of an appliance with vertical flue outlet in
19、the test assembly 56 Figure A.2 - Example of installation of an appliance with horizontal flue outlet in the test assembly 57 Figure A.3 - View of trihedron showing general arrangement of side walls and test hearth 58 Figure A.4 - Detail of filler pieces for trihedron rear wall 59 Figure A.5 - Cross
20、 section showing trihedron construction 60 Figure A.6 - Plan view of trihedron hearth and walls showing position of measurement points 61 Figure A.7 - Detail of thermocouples in trihedron wall 62 Figure A.8 - Construction and general arrangement of measurement section 63 Figure A.9 - Details and dim
21、ensions of measurement section for vertical flue outlet 64 Figure A.10 - Details and dimensions of measurement section for horizontal flue outlet 65 Figure A.11 - Example of test installation for appliances with water circuit 66 Figure A.12 - Details of boiling test utensil 67 Figure A.13 - Typical
22、arrangement of apparatus for oven door test 68 Figure A.14 - Dimensions of measurement section for natural draught safety test 69 Figure B.1 - Flow chart showing selection process for tests on recommended fuels 71 Figure C.1 - Browning chart 75 Figure ZA.1 Example CE marking information 80 BS EN 128
23、15:2001+A1:2004 Page 3 Foreword This European Standard has been prepared by Technical Committee CEN/TC 295 “Residential solid fuel burning appliances“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identi
24、cal text or by endorsement, at the latest by December 2001, and conflicting national standards shall be withdrawn at the latest by December 2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European St
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 12815 2001 A1 2004
链接地址:https://www.31doc.com/p-3737131.html