BS-EN-12899-1-2001.pdf
《BS-EN-12899-1-2001.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12899-1-2001.pdf(54页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12899-1:2001 Including Corrigenda Nos. 1 and 2 Fixed, vertical road traffic signs Part 1: Fixed signs The European Standard EN 12899-1:2001 has the status of a British Standard ICS 93.080.30 ? BS EN 12899-1:2001 This British Standard, having been prepared under the direction o
2、f the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 16 May 2002 BSI 2006 ISBN 0 580 37515 3 National foreword This British Standard is the official English language version of BS EN 12899-1:200
3、1. It partially supersedes BS 873:1983 parts 1 and 7 and supersedes parts 5 and 6, which are withdrawn. The UK participation in its preparation was entrusted by Technical Committee B/509, Road equipment, to Subcommittee B/509/3, Traffic signs. A list of organizations represented on B/509/3 can be ob
4、tained on request to its secretary. Additional information BS EN 12899-1:2001 fully takes into account the requirements of the European Commission Mandate M/111, Circulation fixtures, given under the EU Construction Products Directive (89/106/EEC), but is not intended to lead to CE marking. BS EN 12
5、899-1:2001 is a standard which sets down performance values rather than a method of manufacture. It has, in most cases, several performance classes for each property such as coefficient of retroreflection (R ). It replaces those parts of BS 873 that apply to fixed vertical traffic signs, parts 1 and
6、 7 (clauses dealing with non-illuminated posts). BS EN 12899-1:2001 gives guidance and background information to manufacturers of fixed vertical road traffic signs on the use of BS EN 12899-1:2001. In particular it provides guidance in relation to the information that a manufacturer receives from pu
7、rchasers. This would enable road traffic signs to be designed and manufactured on the basis of that information whilst conforming to BS EN 12899-1:2001. Information on visual and physical performance classes is also included. Amendments issued since publication Amd. No. DateComments 14000 Corrigendu
8、m No. 1 5 August 2002Correction to date of withdrawal 16697 Corrigendum No. 2 31 October 2006 Addition of National Annex NA BS EN 12899-1:2001 i BS EN 12899-1:2001 has different performance classes and some classes comprise a range of values. Recommended classes for visual and physical performance p
9、roperties considered most suitable for UK practice is given in National Annex NA. In the opinion of BSI Technical Committee, areas not covered by BS EN 12899-1:2001 that affect its use in practice are summarized below. Guidance is given on some of these matters in the National Annex NA: microprismat
10、ic material; external illumination of signs; defined safety factors for use when calculating or testing physical performance; methods that state the physical characteristics of sign supports separately from the complete sign assembly; the specification of posts as separate products. NOTE 1 Example v
11、alues are given in the example calculation in informative Annex B, these values are neither normative nor comprehensive. This annex will be omitted in a future revision of BS EN 12899-1:2001. NOTE 2 A revision of BS EN 12899-1:2001 is in progress and a national annex will be included to give additio
12、nal advice on application. It is likely to be late in 2007 before this revision is issued. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal
13、obligations. ? ? ? ? ? blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12899-1 December 2001 ICS 93.080.30 English version Fixed, vertical road traffic signs - Part 1: Fixed signs Signaux fixes de signalisation routire verticale - Partie 1: Panneaux fixes Ortsfeste, vertikale Straenverkeh
14、rszeichen - Teil 1: Ortsfeste Verkehrszeichen This European Standard was approved by CEN on 20 January 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any altera
15、tion. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translati
16、on under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
17、 Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CENAll rights of exploitation in any form and by
18、 any means reserved worldwide for CEN national Members. Ref. No. EN 12899-1:2001 E Contents Foreword3 Introduction.4 1Scope 5 2Normative references5 3Terms and definitions, symbols and abbreviations.6 4Dimensions and tolerances7 5Performance requirements.7 6Methods of test 18 7Marking, labelling and
19、 product information20 Annex A (informative) Tests for structural properties.22 Annex B (informative) Example of structural calculation based on allowable deflections.24 Annex C (normative) Test points for horizontal and vertical loads.34 EN 128991:2001 (E) 2 National Annex NA (informative) Recommen
20、dations for fixed traffic signs 45 Foreword This European Standard has been prepared by the Technical Committee CEN /TC 226, “Road equipment“, the Secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical tex
21、t or by endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn at the latest by December 2005. EN 12699 consists of the following parts, under the general title Fixed, vertical road traffic signs ? Part 1 : Fixed signs ? Part 2 : Transilluminated traffic bolla
22、rds ? Part 3 : Road delineators and road reflective devices (delineation posts) ? Part 4 : Evaluation of conformity, factory production control ? Part 5 : Evaluation of conformity, initial type testing It derives from performance requirements and test methods published in CEN, CENELEC, CIE and ISO d
23、ocuments together with standards of the CEN member organisations. The annexes A and B are informative. Annex C is normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Bel
24、gium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. EN 128991:2001 (E) 3 Introduction This standard is for use by Road Authorities and private developers who wish to us
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 12899 2001
链接地址:https://www.31doc.com/p-3737138.html