《BS-EN-12205-2001.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12205-2001.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12205:2001 Transportable gas cylinders Non-refillable metallic gas cylinders The European Standard EN 12205:2001 has the status of a British Standard ICS 23.020.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN 12205:2001 This British Standard, ha
2、ving been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 July 2001 BSI 07-2001 ISBN 0 580 37152 2 National foreword This British Standard is the official English language version of EN 12205:2
3、001. The UK participation in its preparation was entrusted by Technical Committee PVE/3, Gas containers, to Subcommittee PVE/3/3, Gas containers Design, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-refere
4、nces The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalo
5、gue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text
6、; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside f
7、ront cover, the EN title page, pages 2 to 21 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12205 May 2001 ICS 23.020.30 En
8、glish version Transportable gas cylinders Non-refillable metallic gas cylinders Bouteilles gaz transportables Bouteilles gaz mtalliques non rechargeables Ortsbewegliche Gasflaschen Metallische Einwegflaschen This European Standard was approved by CEN on 8 March 2001. CEN members are bound to comply
9、with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Cen
10、tre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official v
11、ersions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROP
12、EN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12205:2001 E Page 2 EN 12205:2001 BSI 07-2001 Contents Page Foreword. 3 I
13、ntroduction 3 1Scope . 3 2Normative references . 3 3Terms, definitions and symbols 4 4Requirements 6 5Design 9 6Construction and workmanship 10 7Tests. 14 8Inspection 17 9Markings 17 Annex A (normative) Prototype and production testing 19 Bibliography. 21 Page 3 EN 12205:2001 BSI 07-2001 Foreword Th
14、is European Standard has been prepared by Technical Committee CEN/TC 23, Transportable gas cylinders, the Secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Novem
15、ber 2001, and conflicting national standards shall be withdrawn at the latest by November 2001. This European Standard has been prepared under a mandate given to CEN by the European Commission and the Free Trade Association, and supports the objectives of the Framework Directives on Transport of Dan
16、gerous Goods. This standard has been submitted for reference into the RID and/or the technical annexes of the ADR. Therefore, in this context, the standards listed in the normative references and covering basic requirements of the RID/ADR not addressed within the present standard are normative only
17、when the standards themselves are referred to in the RID and/or in the technical annexes of the ADR. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Den
18、mark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Introduction The purpose of this standard is to provide a specification for the design, manufacture, inspection and approval of non-refillabl
19、e metallic gas cylinders. The specifications given are based on knowledge of, and experience with, materials, design requirements, manufacturing processes and control during manufacture of cylinders in common use in the countries of the CEN members. Users of cylinders manufactured to this standard s
20、hould ensure that they are aware of all relevant regulations concerning the gases that may be filled into non-refillable cylinders (for example see common position 19/1999 of the Council of the EU which specifies that substances which are harmful to the ozone layer shall not be put on the market in
21、disposable containers except for essential uses). Where a cylinder is used for a harmful gas, care should be taken to ensure that it is disposed of in a manner that is in accordance with relevant regulations, is safe and meets environmental requirements. 1 Scope This European Standard specifies mini
22、mum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of non-refillable metallic gas cylinders of welded, brazed or seamless construction used for compressed, liquefied and dissolved gases. This standard is not applicable to cartrid
23、ges/aerosol dispensers and spherical containers. NOTEFor cartridges, see EN 417 2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publicatio
24、ns are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendme
25、nts). EN 287-1, Approval testing of welders Fusion welding Part 1: Steels. Page 4 EN 12205:2001 BSI 07-2001 EN 287-2, Approval testing of welders Fusion welding Part 2: Aluminium and aluminium alloys. EN 288-1, Specification and qualification of welding procedures for metallic materials Part 1: Gene
26、ral rules for fusion welding. EN 1800:1998, Transportable gas cylinders Acetylene cylinders Basic requirements and definitions. EN 1964-1:1999, Transportable gas cylinders Specification for the design and construction of refillable transportable seamless steel gas cylinders of capacity from 0,5 litr
27、es up to and including 150 litres Part 1: Seamless steel with a maximum Rm value of 1 100 MPa. prEN 1964-2:1998, Transportable gas cylinders Specification for the design and construction of refillable transportable seamless steel gas cylinders of capacity from 0,5 litres up to and including 150 litr
28、es Part 2: Tensile strength (Rmmax) 1 100N/mm2. EN 1964-3:2000, Transportable gas cylinders Specification for the design and construction of refillable transportable seamless steel gas cylinders of capacity from 0,5 litres up to 150 litres Part 3: Stainless steel cylinders. EN 1975:1999, Transportab
29、le gas cylinders Specification for the design and construction of refillable transportable seamless aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre. EN 10002-1, Metallic materials Tensile testing Part 1: Method of test (at ambient temperature). EN 10088-1, Stainless steels P
30、art 1: List of stainless steels. EN 10120, Steel sheet and strip for welded gas cylinders. EN 10130, Cold rolled low carbon steel flat products for cold forming Technical delivery conditions. EN 12862, Transportable gas cylinders Specification for the design and construction of refillable transporta
31、ble welded aluminium alloy gas cylinders. EN 13133, Brazing Brazer approval. EN 13134, Brazing Procedure approval. EN ISO 3166-1, Codes for the representation of names of countries and their subdivisions Part 1: Country Codes (ISO 3166-1:1997). EN ISO 11114-1:1997, Transportable gas cylinders Compat
32、ibility of cylinder and valve materials with gas contents Part 1: Metallic materials (ISO 11114-1:1997). EN ISO 11120:1999, Gas cylinders Refillable seamless steel pressure vessels for compressed gas transport of water capacity between 150 L and 3 000 L Design and testing (ISO 11120:1999). EN ISO 13
33、340, Transportable gas cylinders Cylinder valves for non-refillable cylinders Specification and prototype testing (ISO 13340:2001). ISO 4706, Refillable welded steel gas cylinders. 3 Terms, definitions and symbols For the purposes of this European Standard the following terms, definitions and symbol
34、s apply. Page 5 EN 12205:2001 BSI 07-2001 3.1 Terms and definitions 3.1.1 non-refillable cylinder cylinder which may be filled only once 3.1.2 batch quantity of completed and pressure tested cylinders of the same design, prototype design, water capacity, material, heat treatment (if any) and manufac
35、turing process, made successively during one production shift of up to 12 hours 3.1.3 burst pressure highest pressure reached in a cylinder during the burst test 3.1.4 material certificate document, issued by the material manufacturer, which states the chemical analysis, mechanical properties, heat
36、treatment, processing techniques or other properties/features if required 3.1.5 cylindrical shell the portion of the cylinder, excluding the heads (ends), which is parallel to the centreline axis of the cylinder 3.1.6 heads (ends) the portions of a cylinder which are not parallel to the centreline a
37、xis of the cylinder 3.1.7 maximum permissible operating pressure highest pressure permitted to be developed during service. It is the developed pressure at 65 C 3.1.8 test pressure required pressure applied during the pressure test 3.1.9 working pressure settled pressure at a uniform temperature of
38、288 K (15 C) for a full gas cylinder 3.1.10 water capacity the capacity of the empty cylinder when filled with water 3.1.11 design stress factor (F) (variable) the ratio of equivalent wall stress at test pressure (ph) to guaranteed minimum yield stress (Re) 3.2 Symbols aCalculated minimum thickness
39、in millimetres of the cylinder shell. DNominal outside diameter of the cylinder, in millimetres. FDesign stress factor (variable). Page 6 EN 12205:2001 BSI 07-2001 phTest pressure, in bar1) above atmospheric pressure. pmsMaximum permissible operating pressure, in bar1) above atmospheric pressure. Re
40、Minimum guaranteed value of yield stress in megapascals for the finished cylinder in the cylindrical part of the cylinder. RgMinimum guaranteed value of the tensile strength in megapascals for the finished cylinder. VWater capacity of the cylinder, in litres. 4 Requirements 4.1 General Cylinders con
41、forming to this standard shall meet the following requirements: a)The maximum permissible operating pressure (pms) shall not exceed 250 bar. b)The product of the maximum permissible operating pressure (pms) and the water capacity (V) shall not exceed 1 000 barlitres. c)Where the maximum permissible
42、operating pressure (pms) exceeds 35 bar, the water capcity (V) shall not exceed 5 litres. d)Cylinders for service with toxic gases or toxic gas mixtures shall have water capacity (V) not exceeding 2 litres. Cylinders having a maximum permissible operating pressure (pms) or water capacity (V) exceedi
43、ng any of the limits given in a), b), c) or d) above shall not be manufactured in accordance with this standard. NOTEFor such cylinders, see the appropriate refillable cylinder standard (e.g. EN 1964-1:1999, EN 1975:1999). Cylinders for service with dissolved acetylene shall incorporate an appropria
44、te porous mass. The completed cylinder containing the porous mass shall meet the requirements of EN 1800:1998. 4.2 Materials 4.2.1 General 4.2.1.1Non-refillable gas cylinders shall be made of carbon or low-alloy carbon steels, austenitic stainless steel, aluminium or aluminium alloys. The materials
45、used are specified by type (see 4.2.2) and chemical compositions (see 4.2.3). Materials shall not present defects which are prejudicial to their use. 4.2.1.2The cylinder manufacturer shall specify the chemical and mechanical requirements to the material supplier. 1) 1bar ? 105 Pa ? 0,1MPa. Page 7 EN
46、 12205:2001 BSI 07-2001 4.2.1.3The cylinder manufacturer shall obtain a material certificate from the material supplier. The certificate shall confirm conformance to the material specification. In the case of steels, this shall include the Charpy value at -20 C (or lower if specified). Charpy values
47、 shall correspond with those specified in the appropriate refillable standard, as follows: For seamless steel, EN 1964-1:1999, prEN 1964-2:1998, EN 1964-3:2000 or EN ISO 11120:1999. NOTEOther standards for the design and construction of cylinders are in preparation and should be conformed to, as app
48、ropriate, when published. 4.2.1.4The cylinder manufacturer shall verify that the materials are in accordance with the cylinder manufacturers specifications. 4.2.1.5All materials used in the construction of the pressure containing parts of the cylinder shall be identified by the cast number/code. 4.2
49、.1.6The steels shall be suitable for use at the minimum operating temperature or -20 C, whichever is lower. 4.2.1.7Materials used for cylinder manufacture shall be compatible with the intended gas service, e.g. corrosive gases, embrittling gases, as specified in EN ISO 11114-1:1997. 4.2.2 Type 1.1.1.1Carbon and low-alloy carbon steels 4.2.2.1.1The steel used for the fabrication of gas cylinders shall be made in an electric furnace or by the basic oxygen process, shall have
链接地址:https://www.31doc.com/p-3737166.html