BS-EN-12195-4-2003.pdf
《BS-EN-12195-4-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12195-4-2003.pdf(22页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12195-4:2003 Load restraint assemblies on road vehicles Safety Part 4: Lashing steel wire ropes The European Standard EN 12195-4:2003 has the status of a British Standard ICS 53.080; 55.180.99 ? Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:33:49 GMT+00:00 2006, Un
2、controlled Copy, (c) BSI BS EN 12195-4:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 10 January 2006 BSI 10 January 2006 ISBN 0 580 46564 0 National foreword This British Standard is the official English language version of EN 12195-4:
3、2003. The UK participation in its preparation was entrusted to Technical Committee MHE/16, Load restraint assemblies, which has the responsibility to: MHE/16 voted against this European standard for the following reasons. Clause 5.2.1 covers ropes with a fibre or steel core, whereas 5.6.1 refers to
4、Table 1 which only covers ropes with a fibre core. MHE/16 attempted to have this omission corrected but was not successful. Users of this standard are recommended to exercise caution when this standard is applied to ropes having a steel core. In addition, BSI has been advised by the wire rope and li
5、fting equipment industry of various editorial errors (which have arisen through the translation process) and readers are requested not to advise BSI of the details because MHE/16 intends to raise such matters when the standard has its first periodic review. A list of organizations represented on thi
6、s committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using
7、 the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity fro
8、m legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.
9、Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 19 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy:
10、sheffieldun sheffieldun, na, Sat Oct 28 08:33:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12195-4 December 2003 ICS 53.080; 55.180.99 English version Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes Disposit
11、ifs darrimage des charges sur vhicules routiers - Scurit - Partie 4: Cbles darrimage en acier Ladungssicherungseinrichtungen auf Straenfahrzeugen - Sicherheit - Teil 4: Zurrdrahtseile This European Standard was approved by CEN on 21 November 2003. CEN members are bound to comply with the CEN/CENELEC
12、 Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN me
13、mber. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members
14、 are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT
15、 EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12195-4:2003 E Licensed Copy: sheffieldun sheffieldun, na, Sat Oct
16、28 08:33:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12195-4:2003 (E) 2 Contents page Foreword3 Introduction.4 1Scope 5 2Normative references 5 3Terms and definitions5 4Hazards.9 5Safety requirements 9 5.1General9 5.2Construction of lashing steel wire ropes and flat lashing steel wire ropes 10
17、5.2.1Wire ropes.10 5.2.2Formation of eyes10 5.2.3Length.10 5.2.4Lashing capacity (LC) for a single leg lashing steel wire rope.10 5.3Tensioning devices11 5.4Connecting components.11 5.5Tension force indicator (optional)11 5.6Mechanical properties.11 5.6.1Lashing capacity (LC)11 5.6.2Proof force12 5.
18、6.3Breaking force (BF)12 6Verification of safety requirements and type testing.13 6.1General13 6.2Test frequency13 6.3Tensile testing of a lashing steel wire rope and flat lashing steel wire rope 13 7Instructions for use .14 8Marking .14 9Manufacturers certificate .14 Annex A (normative) Hazards15 A
19、nnex B (normative) Specification for information for use and maintenance to be provided by the manufacturer17 Bibliography19 Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:33:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12195-4:2003 (E) 3 Foreword This document (EN 12195-4:2003) has b
20、een prepared by Technical Committee CEN/TC 168 “Chains, ropes, webbing, slings and accessories Safety“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Jun
21、e 2004, and conflicting national standards shall be withdrawn at the latest by June 2004. The annexes A and B are normative. The parts of EN 12195 “Load restraint assemblies on road vehicles Safety“ are: Part 1: Calculation of lashing forces Part 2: Web lashing made from man-made fibres Part 3: Lash
22、ing chains Part 4: Lashing steel wire ropes This document includes a bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, Fra
23、nce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:33:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12195-4:2003 (E) 4 Intr
24、oduction This European Standard has been prepared to provide one means of conforming with the safety requirements on lashing steel wire ropes in the Common European Market and thus enabling the free movement of goods. The extent to which hazards are covered is indicated in the scope of this standard
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 12195 2003
链接地址:https://www.31doc.com/p-3737174.html