BS-EN-12274-5-2003.pdf
《BS-EN-12274-5-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12274-5-2003.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12274-5:2003 Slurry surfacing Test method Part 5: Determination of wearing The European Standard EN 12274-5:2003 has the status of a British Standard ICS 93.080.20 ? Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 11:55:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS E
2、N 12274-5:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 21 May 2003 BSI 21 May 2003 ISBN 0 580 41903 7 National foreword This British Standard is the official English language version of EN 12274-5:2003. The UK participation in its pre
3、paration was entrusted by Technical Committee B/510, Road materials, to Subcommittee B/510/2, Surface dressing, sprays and slurry surfacing, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The Bri
4、tish Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards On
5、line. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the respons
6、ible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover
7、, the EN title page, pages 2 to 13 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 11:55:45 GMT+00:00 2006, Uncontrolled C
8、opy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12274-5 January 2003 ICS 93.080.20 English version Slurry surfacing - Test method - Part 5: Determination of wearing Matriaux bitumineux couls froid - Mthode dessai - Partie 5: Dtermination de lusure Dnne Asphaltschicht in Kaltbauweis
9、e - Prfverfahren - Teil 5: Bestimmung des Verschleies This European Standard was approved by CEN on 21 November 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without a
10、ny alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by
11、translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Icelan
12、d, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights
13、 of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12274-5:2003 E Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 11:55:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12274-5:2003 (E) 2 Contents page Foreword3 1Scope 3 2Normative reference
14、s 4 3Terms and definitions4 4Principle4 5Materials5 6Apparatus .5 7Preparation of sample .9 8Test procedure.10 9Expression of results 11 10Test report 12 Bibliography13 Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 11:55:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12274-5:2003 (E) 3 Fo
15、reword This document (EN 12274-5:2003) has been prepared by Technical Committee CEN/TC 227 “Road materials“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest b
16、y July 2003, and conflicting national standards shall be withdrawn at the latest by April 2005. This European Standard is one of a series of standards as listed below: EN 12274-1, Slurry surfacing Test methods Part 1: Sampling for binder extraction. EN 12274-2, Slurry surfacing Test methods Part 2:
17、Determination of residual binder content. EN 12274-3, Slurry surfacing Test methods Part 3: Consistency. EN 12274-4, Slurry surfacing Test methods Part 4: Determination of cohesion of the mix. EN 12274-5, Slurry surfacing Test methods Part 5: Determination of wearing. EN 12274-6, Slurry surfacing Te
18、st methods Part 6: Rate of application. EN 12274-71, Slurry surfacing Test methods Part 7: Shaking abrasion test in suitability of mineral aggregates to slurry mixes. EN 12274-81, Slurry surfacing Test methods Part 8: Visual assessment. According to the CEN/CENELEC Internal Regulations, the national
19、 standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
20、 the United Kingdom. 1 Scope This European Standard specifies a test method for the design of slurry mix based on the determination of the minimum binder content of the mix under wet track abrasion conditions. This European Standard applies to slurry surfacing to be used in surface layers. NOTEFor s
21、ome course mixtures the precision is poor due to loss of aggregates comes up, a comment will be made in the report. 1 In preparation. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 11:55:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12274-5:2003 (E) 4 2 Normative references This European
22、Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications app
23、ly to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 12274-3, Slurry surfacing Test method Part 3: Consistency. ISO 48, Rubber, vulcanized or thermoplastic Deter
24、mination of hardness (Hardness between 10 IRHD and 100 IRHD). 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 set end of the non-reversible process when the emulsion coalescence takes place NOTE 1The coalescence of an emulsion is the
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 12274 2003
链接地址:https://www.31doc.com/p-3737182.html