BS-EN-13231-3-2006.pdf
《BS-EN-13231-3-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13231-3-2006.pdf(40页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13231-3:2006 Railway applications Track Acceptance of works Part 3: Acceptance of rail grinding, milling and planing work in track The European Standard EN 13231-3:2006 has the status of a British Standard ICS 45.080 ? Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:
2、58:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13231-3:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2006 BSI 2006 ISBN 0 580 48623 0 National foreword This British Standard is the official English language version of E
3、N 13231-3:2006. The UK participation in its preparation was entrusted to Technical Committee RAE/2, Railway track and components, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards
4、 which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This pub
5、lication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible internati
6、onal/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title pag
7、e, pages 2 to 36, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:58:49 GMT+00:00 2006, Uncontro
8、lled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13231-3 May 2006 ICS 45.080 English Version Railway applications - Track - Acceptance of works - Part 3: Acceptance of rail grinding, milling and planing work in track Applications ferroviaires - Voie - Rception des travaux - Pa
9、rtie 3: Critres de rception des travaux de meulage, fraisage et rabotage des rails en voie Bahnanwendungen - Oberbau - Abnahme von Arbeiten - Teil 3: Abnahme von Schleif-, Frs- und Hobelarbeiten an Schienen im Gleis This European Standard was approved by CEN on 13 April 2006. CEN members are bound t
10、o comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Centr
11、al Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as t
12、he official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slove
13、nia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN n
14、ational Members. Ref. No. EN 13231-3:2006: E Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:58:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13231-3:2006 (E) 2 Contents Page Foreword4 1 Scope 5 2 Normative references5 3 Terms and definitions .5 4 Longitudinal profile .8 4.1 Principle8
15、4.2 Measurements required 9 4.3 Acceptance criteria for longitudinal profile 9 4.3.1 General9 4.3.2 Moving average of RMS amplitudes9 4.3.3 Moving average of peak-to-peak amplitude9 4.3.4 Number of irregularities exceeding a specified amplitude .10 5 Transverse profile11 5.1 Principle11 5.2 Measurem
16、ents required 11 5.3 Acceptance criteria for the transverse profile11 6 Metal removal.12 6.1 Measurements required 12 6.2 Acceptance criteria for metal removal.12 7 Surface roughness 12 8 Visual appearance: acceptance criteria 13 Annex A (informative) Procedures to verify reference instruments 16 A.
17、1 Longitudinal profile .16 A.1.1 Principle16 A.1.2 Calibration beam16 A.1.3 Coordinate Measuring Machine (CMM) .17 A.1.4 Measurement of the calibration beam using the CMM 17 A.1.5 Data analysis17 A.1.6 Acceptance of calibration beam.18 A.1.7 Measurement of the calibration beam using the test instrum
18、ent.18 A.1.8 Data analysis using the test instrument18 A.1.9 Acceptance criteria for reference instruments.19 A.1.10 Test report20 A.2 Transverse profile20 A.2.1 Principle20 A.2.2 Calibration jig.20 A.2.3 Coordinate measuring machine (CMM).20 A.2.4 Calibration jig verification.20 A.2.5 Rail measurem
19、ents using the test instrument21 A.2.6 Acceptance of test instruments.21 A.2.7 Test report21 Annex B (informative) Procedures to demonstrate correlation of approved and reference instruments 26 B.1 Longitudinal profile .26 B.1.1 Principle26 B.1.2 Characteristics of the test sites .26 B.1.3 Measureme
20、nts required 27 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:58:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13231-3:2006 (E) 3 B.1.4 Data analysis27 B.1.5 Acceptance criteria for approved instruments 28 B.1.6 Test report29 B.2 Transverse profile .29 B.2.1 Principle29 B.2.2 Characte
21、ristics of the test sites.30 B.2.3 Measurements required30 B.2.4 Data analysis30 B.2.5 Acceptance criteria for approved instruments 30 B.2.6 Test report31 Annex C (informative) Example of acceptance documentation for rail re-profiling work .32 Annex D (informative) Calculation of moving average RMS
22、and moving average peak-to-peak values34 D.1 Moving average RMS values34 D.2 Moving average peak-to-peak values35 Bibliography36 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 10:58:49 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13231-3:2006 (E) 4 Foreword This document (EN 13231-3:2006) h
23、as been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting n
24、ational standards shall be withdrawn at the latest by November 2006. This European Standard is one of the series EN 13231 “Railway applications Track Acceptance of works“ as listed below: Part 1: Works on ballasted track - Plain line Part 2: Works on ballasted track - Switches and crossings Part 3:
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13231 2006
链接地址:https://www.31doc.com/p-3737207.html