BS-EN-12345-1999.pdf
《BS-EN-12345-1999.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12345-1999.pdf(58页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12345:1999 Welding Multilingual terms for welded joints with illustrations The European Standard EN 12345:1998 has the status of a British Standard ICS 01.040.25; 25.160.40 Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 05:00:16 GMT+00:00 2006, Uncontrolled Copy, (c) B
2、SI BS EN 12345:1999 This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 February 1999 BSI 05-1999 ISBN 0 580 30329 2 National foreword This British Standard is th
3、e English language version of EN 12345:1998. It incorporates the corrigendum (to be) issued by CEN to correct page layout and missing text. The UK participation in its preparation was entrusted to Technical Committee WEE/1, Definitions and symbols for welding, which has the responsibility to: aid en
4、quirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations
5、 represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Corre
6、spondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does no
7、t of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 52 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This wil
8、l be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 05:00:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 12345:1999 BSI 05-1999i Contents Page National forewordInside fro
9、nt cover Foreword2 Text of EN 123455 Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 05:00:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 05:00:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPI
10、SCHE NORM EN 12345 September 1998 ICS 01.040.25; 25.160.40 Descriptors: Welding, welded joints, joining, vocabulary, nomenclature, multilingual nomenclature, graphic methods, classifications English version Welding Multilingual terms for welded joints with illustrations Soudage Liste multilingue de
11、termes relatifs aux assemblages et aux joints souds, avec illustrations Schweien Mehrsprachige Benennungen fr Schweiverbindugnen mit bildlichen Darstellungen This European Standard was approved by CEN on 18 July 1998. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which st
12、ipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard
13、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standard
14、s bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr
15、 Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12345:1998 E Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 05:00:16 GMT+00:00 2006, Uncontrolled Copy,
16、(c) BSI EN 12345:1998 BSI 05-1999 2 Foreword This European standard has been prepared by Technical Committee CEN/TC 121 “Welding”, the secretariat of which is held by DS. Avant-propos La prsente norme europenne a t labore par le Comit Technique CEN/TC 121 “Soudage” dont le secrtariat est tenu par le
17、 DS. Vorwort Diese Europische Norm wurde vom Technischen Komitee CEN/TC 121 “Schweien” erarbeitet, dessen Sekretariat vom DS gehalten wird. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest March 1999,
18、 and conflicting national standards shall be withdrawn at the latest March 1999. Cette norme europenne devra recevoir le statut de norme nationale, soit par publication dun texte identique, soit par entrinement, au plus tard en mars 1998, et toutes normes nationales en contradiction devront tre rtir
19、es au plus tard en mars 1998. Diese Europische Norm mu den Status einer nationalen Norm erhalten, entweder durch Verfentlichung eines identischen Textes oder durch Anerkennung bis Mrz 1998, und etwaige entgegenstehende nationale Normen mssen bis Mrz 1998 zurck gezogen werden. This European Standard
20、has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This European Standard is considered to be a supporting standard to those application and product standards which in themselves support an essential safety requirement of a New Approach
21、 Directive and which make reference to this European Standard. La prsente Norme Europenne a t labore dans le cadre dun mandat donn au CEN par la Commission Europenne et lAssociation Europenne de Libre Echange. Cette Norme Europenne est considre comme une norme de support pour autres normes dapplicat
22、ion ou de produit qui viennent elles-mmes appui dune exigence essentielle de curit dune directive Nouvelle Approche, et qui citeront cette Norme Europenne en rfrence normative. Diese Europische Norm wurde im Rahmen eines Mandates, das dem CEN von der Europischen Kommission und der Europischen Freiha
23、ndelszone erteilt wurde, erarbeitet. Diese Europaische Norm wird als eine untersttzende Norm zu anderen Anwendungs- und Produktnormen betrachtet, die selbst eine grundlegende Sicherheitsanforderung einer Richtlinie der Neuen Konzeption unterstutzen und auf die vorliegende Europische Norm normativ ve
24、rweisen. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, No
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 12345 1999
链接地址:https://www.31doc.com/p-3737236.html