BS-EN-13285-2003.pdf
《BS-EN-13285-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13285-2003.pdf(26页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13285:2003 Unbound mixtures Specification The European Standard EN 13285:2003 has the status of a British Standard ICS 93.080.20 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 12:22:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13285:2003 This British Standard
2、was published under the authority of the Standards Policy and Strategy Committee on 7 May 2003 BSI 7 May 2003 ISBN 0 580 41784 0 National foreword This British Standard is the official English language version of EN 13285:2003. The UK participation in its preparation was entrusted by Technical Commi
3、ttee B/510, Road materials, to Subcommittee B/510/4, Cementitious bound materials, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European p
4、ublications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the
5、 necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the
6、 interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 23 and a back cover. The B
7、SI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 12:22:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE
8、NORM EN 13285 April 2003 ICS 93.080.20 English version Unbound mixtures - Specification Graves non traites - SpcificationsUngebundene Gemische - Anforderungen This European Standard was approved by CEN on 12 December 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations whi
9、ch stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Stand
10、ard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standar
11、ds bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION
12、 EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13285:2003 E Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 12:22:52 GMT+00:00 2006,
13、 Uncontrolled Copy, (c) BSI EN 13285:2003 (E) 2 Contents page Foreword. 3 1Scope 3 2Normative references . 3 3Terms and definitions. 4 4Requirements 4 5Evaluation of conformity 10 6Designation and description 10 7Marking and labelling . 11 Annex A (informative) Description of mixtures containing rec
14、ycled aggregates. 12 Annex B (informative) Use of the supplier declared value 15 Annex C (informative) Guidance on the assessment of the mechanical behaviour of unbound mixtures . 17 Annex D (normative) Factory production control 18 Bibliography . 23 Licensed Copy: sheffieldun sheffieldun, na, Mon O
15、ct 30 12:22:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13285:2003 (E) 3 Foreword This document (EN 13285:2003) has been prepared by Technical Committee CEN/TC 227 “Road Materials“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard,
16、 either by publication of an identical text or by endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at the latest by December 2003. Annexes A, B and C are informative. Annex D is normative. According to the CEN/CENELEC Internal Regulations, the natio
17、nal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland
18、and the United Kingdom. 1 Scope This European Standard specifies requirements for unbound mixtures used for construction and maintenance of roads, airfields and other trafficked areas. The requirements are defined with appropriate cross-reference to EN 13242. This European Standard applies to unboun
19、d mixtures of natural, artificial and recycled aggregates (see annex A) with a upper sieve size (D) from 8 mm to 80 mm and lower sieve size (d) = 0 at the point of delivery. NOTE 1Mixtures with an upper sieve size (D) greater than 80 mm are not covered by this European Standard but may be specified
20、in the place of use. NOTE 2Water content of the mixture and the density of the installed layer are not specified mixture requirements. Both parameters are related to the control of the construction of the layer, and are outside the scope of this European Standard. 2 Normative references This Europea
21、n Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications a
22、pply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 933-1, Tests for geometrical properties of aggregates Part 1: Determination of particle size distribution
23、Sieving method. EN 1744-1, Tests for chemical properties of aggregates Chemical analysis. EN 13242, Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction. EN 13286-1, Unbound and hydraulically bound mixtures Part 1: Test methods for laborato
24、ry dry density and water content Introduction, general requirements and sampling. prEN 13286-2, Unbound and hydraulically bound mixtures Part 2: Test methods for laboratory dry density and water content Proctor compaction. EN 13286-3, Unbound and hydraulically bound mixtures Part 3: Test methods for
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13285 2003
链接地址:https://www.31doc.com/p-3737268.html