BS-EN-10249-2-1996.pdf
《BS-EN-10249-2-1996.pdf》由会员分享,可在线阅读,更多相关《BS-EN-10249-2-1996.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10249-2:1996 Cold formed sheet piling of non alloy steels Part 2: Tolerances on shape and dimensions The European Standard EN 10249-2:1995 has the status of a British Standard BS EN 10249-2:1996 This British Standard, having been prepared under the direction of the Engineering
2、 Sector Board, was published under the authority of the Standards Board and comes into effect on 15 March 1996 BSI 03-2000 The following BSI references relate to the work on this standard: Committee reference ISE/12 Draft for comment 93/309095 DC ISBN 0 580 24949 2 Committees responsible for this Br
3、itish Standard The preparation of this British Standard was entrusted to Technical Committee ISE/12, Structural steels, upon which the following bodies were represented: BEAMA Ltd. British Constructional Steelwork Association Ltd. British Iron and Steel Producers Association British Railways Board D
4、epartment of Transport Institution of Structural Engineers Lloyds Register of Shipping National Association of Steel Stockholders Railway Industry Association Society of Motor Manufacturers and Traders Limited Steel Construction Institute Welding Institute Amendments issued since publication Amd. No
5、.DateComments BS EN 10249-2:1996 BSI 03-2000i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 10249-23 List of referencesInside back cover BS EN 10249-2:1996 ii BSI 03-2000 National foreword This British Standard has been prepared by Technical Committe
6、e ISE/12 and is the English language version of EN 10249-2:1995 Cold formed sheet piling of non alloy steels Part 2: Tolerances on shape and dimensions, published by the European Committee for Standardization (CEN). A British Standard does not purport to include all the necessary provisions of a con
7、tract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to
8、6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10249-2 June 1995 ICS 77.140.70 Descri
9、ptors: Iron and steel products, metal sections, sheet pilings, steels, unalloyed steels, dimensions, dimensional tolerances, form tolerances English version Cold formed sheet piling of non alloy steels Part 2: Tolerances on shape and dimensions Palplanches profiles froid en aciers non allis Partie 2
10、: Tolrances sur forme et dimensions Kaltgeformte Spundbohlen aus unlegierte Sthlen Teil 2: Grenzabma“e und Formtoleranzen This European Standard was approved by CEN on 1995-05-05. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
11、 European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (En
12、glish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark,
13、 Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-10
14、50 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN 10249-2:1995 E EN 10249-2:1995 BSI 03-2000 2 Foreword This European Standard was prepared by SC4, Sheet piling, of Technical Committee ECISS/TC10,
15、Structural steels Qualities, the secretariat of which is held by NNI. EN 10249 is composed of two Parts: Part 1: Technical delivery conditions; Part 2: Tolerances on shape and dimensions. This European Standard shall be given the status of a national standard, either by publication of an identical t
16、ext or by endorsement, at the latest by December 1995, and conflicting national standards shall be withdrawn at the latest by December 1995. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, F
17、rance, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom. Contents Page Foreword2 1Scope3 2Normative references3 3Control of tolerances General3 4Height of profiles3 5Width of profiles3 6Wall thickness of profiles3 7Straig
18、htness of profiles3 7.1General3 7.2Bending3 7.3Curving3 7.4Twisting3 8Length3 9Squareness of ends3 10Angular deviation6 11Mass of profiles6 12Joints, overlapping6 13Options6 Figure 1 Measurement of bending4 Figure 2 Measurement of curving5 Figure 3 Measurement of twisting5 Figure 4 Squareness of end
19、s6 Figure 5 Flange angle !6 Table 1 Tolerances on the height of sheet piles4 EN 10249-2:1995 BSI 03-20003 1 Scope This Part of this European Standard specifies the tolerances on dimensions, squareness of ends, straightness and mass of cold formed non alloy steel sheet piles which are defined in EN 1
20、0249-1. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to o
21、r revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 10051, Continuously hot rolled uncoated plate, sheet and strip of non alloy and alloy s
22、teels Tolerances on dimensions and shape. EN 10249-1, Cold formed sheet piling of non alloy steels Part 1: Technical delivery conditions. 3 Control of tolerances General 3.1 All the measurements are taken outside of the zone deformed by cutting at a distance from the ends of at least 250 mm. 3.2 The
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10249 1996
链接地址:https://www.31doc.com/p-3737417.html