BS-AU-231-1989 ISO-4141-1988.pdf
《BS-AU-231-1989 ISO-4141-1988.pdf》由会员分享,可在线阅读,更多相关《BS-AU-231-1989 ISO-4141-1988.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD AUTOMOBILE SERIES BS AU 231: 1989 ISO 4141:1988 Specification for Seven-core connecting cable for road vehicles Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:05:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 231:1989 This British Stand
2、ard, having been prepared under the direction of the Automobile Standards Policy Committee, was published under the authority of the Board of BSI and comes into effect on 29 September 1989 BSI 01-2000 The following BSI references relate to the work on this standard: Committee reference AUE/16 Draft
3、for comment 85/79462 DC ISBN 0 580 17433 6 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Automobile Standards Policy Committee (AUE/-) to Technical Committee AUE/16, upon which the following bodies were represented: Association of Trai
4、ler Manufacturers British Cable Makers Confederation Department of Transport (Highways) Department of Transport (Transport and Road Research Laboratory) Department of Trade and Industry Institution of Electronic and Radio Engineers National Caravan Council Ltd. Society of Motor Manufacturers and Tra
5、ders Ltd. Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:05:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 231:1989 BSI 01-2000i Contents Page Committees responsibleInside front cover Nat
6、ional forewordii 1Scope1 2Field of application1 3References1 4Specifications1 Figure1 Table1 Publications referred toInside back cover Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:05:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 231:1989 ii BSI 01-20
7、00 National foreword This British Standard has been prepared under the direction of the Automobile Standards Policy Committee and is identical with ISO 4141:1988 “Road vehicles-Seven-core connecting cables” published by the International Organization for Standardization (ISO). The Technical Committe
8、e has reviewed the provisions of ISO 1724, ISO 3731, ISO 3732 and ISO 6722 and has decided that they are acceptable for use in conjunction with this standard. A related British Standard for ISO 1724:1980 is BS AU 149a:1980, “Specification for electrical connections between towing vehicles and traile
9、rs with 6 V or 12 V electrical equipment: type 12 N (normal)”. A related British Standard for ISO 3731:1980 is BS AU 198:1984, “Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 S (supplementary)”. A related British Standard for ISO
10、 3732:1982 is BS AU 177a:1980, “Specification for related electrical connections between vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary)”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are
11、responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references International StandardCorresponding British Standard ISO 1185:1975BS AU 197:1984 Specification for electrical connections between towing vehicles
12、and trailers with 24 V electrical equipment: type 24N (normal) (Technically equivalent) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may hav
13、e had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 02:05:14 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 231:1989 BSI 01-20001 1 Scope This International Sta
14、ndard specifies the characteristics of seven-core cables of types A and B, used for electrical connections between towing and towed vehicles. 2 Field of application This International Standard applies to seven-core cables intended for connection with plugs of types 24 N or 12 N (cable type A) and 24
15、 S or 12 S (cable type B), which are specified respectively in ISO 1185, ISO 1724, ISO 3731 and ISO 3732. 3 References ISO 1185, Road vehicles Electrical connections between towing vehicles and towed vehicles with 24 V electrical equipment Type 24 N (normal). ISO 1724, Road vehicles Electrical conne
16、ctions between towing vehicles and towed vehicles with 6 or 12 V electrical equipment Type 12 N (normal). ISO 3731, Road vehicles Electrical connections between towing vehicles and trailers with 24 V electrical equipment Type 24 S (supplementary). ISO 3732, Road vehicles Electrical connections betwe
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-AU-231-1989 ISO-4141-1988 BS AU 231 1989 ISO 4141 1988
链接地址:https://www.31doc.com/p-3737465.html