BS-7971-6-2003.pdf
《BS-7971-6-2003.pdf》由会员分享,可在线阅读,更多相关《BS-7971-6-2003.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 7971-6:2003 Protective clothing and equipment for use in violent situations and in training Part 6: Gloves for protection against mechanical, thermal and chemical hazards Requirements and test methods ICS 13.340.10 ? Licensed Copy: London South Bank University, London South Bank
2、University, Fri Dec 08 10:44:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7971-6:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 22 April 2003 BSI 22 April 2003 The following BSI references relate to the work on this British Standard
3、: Committee reference PH/3/12 Draft for comment 00/561889 DC ISBN 0 580 41570 8 Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee PH/3, Protective clothing, to Subcommittee PH/3/12, Protective clothing and equipment for use
4、 in violent situations, upon which the following bodies were represented: APSS Association of Police and Public Security Suppliers Association of Chief Police Officers in Scotland BSIF Test and Certification Association British Association for Chemical Specialities British Association of Women Polic
5、e British Clothing Industry Association British Glove Association British Textile Technology Group Defence Industries Association Department of Health Medical Devices Agency Home Office Ministry of Defence UK Defence Standardization National Association of Healthcare Safety and Risk Practitioners Pe
6、rsonal Safety Manufacturers Association Police Federation of England and Wales Police Purchasing Manager Association Police Uniform Project Group SATRA Technology Centre Co-opted members Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London Sout
7、h Bank University, Fri Dec 08 10:44:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7971-6:2003 BSI 22 April 2003 i Contents Page Committees responsibleInside front cover Forewordii Introduction1 1Scope1 2Normative references1 3Glove types and performance levels2 4Construction and performance requi
8、rements2 5Test specimens, and conditioning and testing conditions3 Annex A (informative) Information and guidance on the use of protective gloves5 Bibliography7 Table 1 Types and performance levels of MTC gloves2 Table 2 Minimum length of gloves2 Table 3 Maximum test scores2 Licensed Copy: London So
9、uth Bank University, London South Bank University, Fri Dec 08 10:44:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7971-6:2003 ii BSI 22 April 2003 Foreword This part of BS 7971 has been prepared by Subcommittee PH/3/12. The following parts of BS 7971 are currently published or in preparation: Par
10、t 1: General requirements; Part 2: Guidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment; Part 3: Personal defence shields Requirements and test methods; Part 4: Limb protectors Requirements and test methods; Part 5: Footwear Requirement
11、s and test methods; Part 6: Gloves for protection against mechanical, thermal and chemical hazards Requirements and test methods; Part 7: Slash-resistant gloves Requirements and test methods; Part 8: Blunt trauma body, shoulder, abdomen and genital protectors Requirements and test methods; Part 9: T
12、raining suits and equipment Requirements and test methods; Part 10: Coveralls Requirements and test methods. It has been assumed in the drafting of this standard that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produc
13、ed. WARNING. This British Standard calls for the use of substances and/or procedures that may be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage. Product
14、 certification/inspection/testing. Users of this British Standard are advised to consider the desirability of third-party certification/inspection/testing of product conformity with the relevant parts of BS 7971. Appropriate conformity attestation arrangements are described in BS EN ISO/IEC 17025. U
15、sers seeking assistance in identifying appropriate conformity assessment bodies or schemes may ask BSI to forward their enquiries to the relevant association. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. C
16、ompliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the document w
17、as last issued. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:44:00 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7971-6:2003 BSI 22 April 2003 1 Introduction Protective gloves are items of protective clothing and equipment which are generally, but not excl
18、usively, worn by serving police officers and prison officers whilst they are engaged in operational duties and in training. They are also used by civilians engaged in activities where the risks of attack and assault are similar, e.g. private security personnel, bullion handlers, escorts and couriers
19、. The protective gloves specified in this part of BS 7971 are intended to reduce the risk of injury from mechanical, thermal and chemical hazards. The test methods specified in this part of BS 7971 have been designed to measure the performance of gloves with respect to the protection they can be exp
20、ected to provide against these hazards. However, these tests do not necessarily compare with the conditions to which police officers, prison officers and other users can be exposed in real life situations, where the mechanical, thermal and chemical hazards encountered might be different. 1 Scope Thi
21、s part of BS 7971 specifies performance requirements and test methods for gloves to provide protection against mechanical, thermal and chemical hazards, for use by police and prison officers and others who might be exposed to attack and assault in the course of their duties, for use in operational s
22、ituations and in training. NOTE 1Information and guidance on the use of these gloves is given in Annex A. NOTE 2 Guidance on risk assessment and the selection, care and maintenance of protective clothing and equipment for use in violent situations and in training is given in BS 7971-2. 2 Normative r
23、eferences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including amendments) applies. BS 7971-1, Protective clothing and equipmen
24、t for use in violent situations and in training Part 1: General requirements. BS EN 344-1, Safety, protective and occupational footwear for professional use Part 1: Requirements and test methods. BS EN 367:1992, Protective clothing Protection against heat and flames Test method: Determination of the
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS 7971 2003
链接地址:https://www.31doc.com/p-3737537.html