《BS-EN-12697-1-2000.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12697-1-2000.pdf(52页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12697-1:2000 Incorporating Corrigendum No. 1 Bituminous mixtures Test methods for hot mix asphalt Part 1: Soluble binder content The European Standard EN 12697-1:2000 has the status of a British Standard ICS 91.100.50; 93.080.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERM
2、ITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:58:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 12697-1:2000 This British Standard, having been prepared under the direction of the Sector Committee for Building and Civil Engineering, was published under the aut
3、hority of the Standards Committee and comes into effect on 15 December 2000 BSI 08-2001 ISBN 0 580 36312 0 National foreword This British Standard is the official English language version of EN 12697-1:2000, including corrigendum February 2001. The UK participation in its preparation was entrusted b
4、y Technical Committee B/510, Road materials to Subcommittee B/510/1, Coated macadam and hot mix asphalt, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement these
5、 international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary p
6、rovisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enqui
7、ries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 49 and a back c
8、over. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 13170 Corrigendum No. 1 August 2001 Change to date of withdrawal of conflicting national standards in EN foreword Licensed Copy: sheffieldu
9、n sheffieldun, na, Sat Oct 28 09:58:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12697-1 October 2000 ICS 93.080.20 English version :1 traP - tlahpsa xim toh rof sdohtem tseT - serutxim suonimutiB tnetnoc rednib elbuloS This European Standard was
10、 approved by CEN on 4 October 2000. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nat
11、ional standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and n
12、otified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerlan
13、d and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Central Secretariat: rue de Stassart, 36 B-1050 Brussels 2000 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN
14、 12697-1:2000 E Inrocparoting rroCeginudm uAugst 2001 Incorporating Corrigendum February 2001 Bituminous mixtures Test methods for hot mix asphalt Part 1: Soluble binder content Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:58:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 2 EN 12697
15、-1:2000 Contents PAGE FOREWORD3 INTRODUCTION5 1SCOPE6 2NORMATIVE REFERENCES6 3TERMS AND DEFINITIONS6 4PREPARATORY TREATMENT OF LABORATORY SAMPLES OF BITUMINOUS MIXTURES8 5DETERMINATION OF BINDER CONTENT8 6DRYING TO CONSTANT MASS12 7REPORTING OF RESULTS13 8PRECISION DATA13 ANNEX A (INFORMATIVE) GUIDA
16、NCE ON THE DETERMINATION OF BINDER CONTENT16 ANNEX B (NORMATIVE) USE OF EQUIPMENT FOR THE DETERMINATION OF BINDER CONTENT19 ANNEX C (NORMATIVE) DETERMINATION OF RESIDUAL MINERAL MATTER IN THE BINDER EXTRACT BY INCINERATION46 BIBLIOGRAPHY49 Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:58
17、:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 3 EN 12697-1:2000 Foreword This European Standard has been prepared by Technical Committee CEN/TC 227 “Road materials“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publ
18、ication of an identical text or by endorsement, at the latest by April 2001, and conflicting national standards shall be withdrawn at the latest by April 2001. This European Standard is one of a series of standards as listet below: EN 12697-1, Bituminous mixtures - Test methods for hot mix asphalt -
19、 Part 1: Soluble binder content prEN 12697-2, Bituminous mixtures - Test methods for hot mix asphalt - Part 2: Particle size distribution EN 12697-3, Bituminous mixtures -Test methods for hot mix asphalt - Part 3: Binder recovery: Rotary evaporator EN 12697-4, Bituminous mixtures - Test methods for
20、hot mix asphalt - Part 4: Binder recovery: Fractionating column prEN 12697-5, Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density prEN 12697-6, Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bitumino
21、us specimen by hydro-static method prEN 12697-7, Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays prEN 12697-8, Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of the air voids content
22、of bituminous materials prEN 12697-9, Bituminous mixtures - Test methods for hot mix asphalt - Part 9: Determination of the reference density, gyrator compactor prEN 12697-10, Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactibility prEN 12697-11, Bituminous mixtures - Test m
23、ethods for hot mix asphalt - Part 11: Determination of the affinity between aggregates and binders prEN 12697-12, Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of specimen EN 12697-13, Bituminous mixtures - Test methods for hot mix asphalt -
24、 Part 13: Temperature measurement EN 12697-14, Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water content prEN 12697-15, Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity of bituminous mixtures prEN 12697-16, Bituminou
25、s mixtures - Test methods for hot mix asphalt Part 16: Abrasion by studded tyres This European Standard has been prepared by Technical Committee CEN/TC 227, Road materials, the Secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by pub
26、lication of an identical text or by endorsement, at the latest by April 2001, and conflicting national standards shall be withdrawn at the latest by December 2003. This European Standard is one of a series of standards as listed below:. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:58:30
27、 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 4 EN 12697-1:2000 prEN 12697-17, Bituminous mixtures - Test methods for hot mix asphalt Part 17: Particle loss of specimen prEN 12697-18, Bituminous mixtures - Test methods for hot mix asphalt - Part 18: Binder drainage from porous asphalt prEN 12697-
28、19, Bituminous mixtures - Test methods for hot mix asphalt Part 19: Permeability of specimen prEN 12697-20, Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube or marshall specimen prEN 12697-21, Bituminous mixtures - Test methods for hot mix asphalt - Part 21: I
29、ndentation using plate specimen prEN 12697-22, Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking test prEN 12697-23, Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Indirect tensile test prEN 12697-24, Bituminous mixtures - Test methods for hot mix as
30、phalt - Part 24: Resistance to fatique prEN 12697-25, Bituminous mixtures - Test methods for hot mix asphalt Part 25: Dynamic creep test prEN 12697-26, Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness EN 12697-27, Bituminous mixtures - Test methods for hot mix asphalt - Pa
31、rt 27: Sampling EN 12697-28, Bituminous mixtures - Test methods for hot mix asphalt Part 28: Preparation of samples for determining binder content, water content and grading prEN 12697-29, Bituminous mixtures - Test methods for hot mix asphalt - Part 29: Determination of the dimensions of bituminous
32、 specimen prEN 12697-30, Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Preparation of specimen by impact compactor prEN 12697-31, Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation, gyratory compactor prEN 12697-32, Bituminous mixtures - Test m
33、ethods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by a vibratory compactor prEN 12697-33, Bituminous mixtures - Test methods for hot mix asphalt Part 33: Specimen preparation, slab compactor prEN 12697-34, Bituminous mixtures - Test methods for hot mix asphalt - Part
34、 34: Marshall test prEN 12697-35, Bituminous mixtures - Test methods for hot mix asphalt Part 35: Laboratory mixing prEN 12697-36, Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Method for the determination of the thickness of a bituminous pavement prEN 12697-37, Bituminous mixtur
35、es - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:58:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 5 EN 12697-1:2000 prEN 12697-38, Common equipment and calibration
36、 The applicability of this European Standard is described in the product standards for bituminous mixtures. No existing European Standard is superseded. WARNING The method described in this European Standard may require the use of dichloromethane (methylene chloride). This solvent is hazardous to he
37、alth and is subject to occupational exposure limits as described in relevant legislation and regulations. Exposure levels are related to both handling procedures and ventilation provision and it is emphasised that adequate training should be given to staff employed in the use of this substances. Ann
38、ex A is informative. The annexes B and C are normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Icela
39、nd, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Introduction This European Standard describes a unified approach to the examination of bituminous mixtures that allows some divergence in the detail of procedures followed by individual
40、laboratories. In clause 5 of this European Standard, a description is given of the basic operations that together form the test method for the proper determination of the binder content of bituminous mixtures. Guidance on the test method is given in Annex A and Figure A.1 whilst the use of alternati
41、ve items of equipment that are equally suitable for carrying out particular parts of the test method are described in Annex B. Although the apparatus specified for the separation of mineral filler from the binder solution obtained after extraction is of a suitably efficient level not to affect the p
42、recision of the test described in clause 8, a method for determining the amount of residual mineral matter in the extract is given in Annex C for use in those particular cases where some doubt may exist. Methods and equipment other than those described in Annex B and Annex C, including automated equ
43、ipment, are permissible provided that it has been demonstrated that they provide the same results as one of the methods in Annex B or Annex C within the limits of the precision given in the Standard. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:58:30 GMT+00:00 2006, Uncontrolled Copy, (
44、c) BSI Page 6 EN 12697-1:2000 1Scope This European Standard describes test methods for the determination of the soluble binder content of samples of bituminous mixtures. The test methods described are suitable for quality control purposes during the production of plant mix and for checking complianc
45、e with a product specification. Test methods for the analysis of mixtures containing modified binders are outside the scope of this European Standard. 2Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative referenc
46、es are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the lat
47、est edition of the publication referred to applies (including amendments). EN 933-1, Tests for geometrical properties of aggregates Part 1: Determination of particle size distribution Sieving method. EN 12697-3:2000, Bituminous mixtures Test methods for hot mix asphalt Part 3: Bitumen recovery: Rota
48、ry evaporator. EN 12697-4:2000, Bituminous mixtures Test methods for hot mix asphalt Part 4: Bitumen recovery: Fractionating column. EN 12697-14:2000, Bituminous mixtures Test methods for hot mix asphalt Part 14: Water content. prEN 12697-27:2000, Bituminous mixtures Test methods for hot mix asphalt
49、 Part 27: Sampling prEN 12697-28:2000, Bituminous mixtures Test methods for hot mix asphalt Part 28: Preparation of samples for determining binder content, water content and grading. ISO 3310-1, Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth. ISO 3310-2, Test sieves Technical requirements and testing Part 2: Test sieves of perforated metal plate. ISO 5725, Accurancy (trueness and precision) of measurement methods and results. 3Terms and definitions For the purposes of this European Standa
链接地址:https://www.31doc.com/p-3737566.html