BS-A-303-1994 ISO-3185-1993.pdf
《BS-A-303-1994 ISO-3185-1993.pdf》由会员分享,可在线阅读,更多相关《BS-A-303-1994 ISO-3185-1993.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS A 303:1994 ISO 3185:1993 Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa Dimensions Licensed Copy: London South Bank University, London South Bank University, S
2、at Dec 09 03:32:47 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 303:1994 This British Standard, having been prepared under the direction of the Aerospace Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 August 1994 BSI 01-2000 The fo
3、llowing BSI references relate to the work on this standard: Committee reference ACE/12 Draft for comment 90/79568 DC ISBN 0 580 23217 4 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Aerospace Standards Policy Committee (ACE/-) to Techn
4、ical Committee ACE/12, upon which the following bodies were represented: The Association of Electronics, Telecommunications and Business Equipment Industries British Industrial Fasteners Federation Ministry of Defence Society of British Aerospace Companies Ltd. Amendments issued since publication Am
5、d. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:32:47 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 303:1994 BSI 01-2000i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2Normative references1 3Configura
6、tion and dimensions1 Figure 12 Table 13 List of referencesInside back cover Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:32:47 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 303:1994 ii BSI 01-2000 National foreword This British Standard has been prepared
7、 under the direction of the Aerospace Standards Policy Committee. It is identical with ISO 3185:1993 Aerospace Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa Dimensions, publishe
8、d by the International Organization for Standardization (ISO). The Technical Committee has reviewed the provisions of ISO 4095:1978, to which normative reference is made in the text, and has decided that they are acceptable for use in conjunction with this standard. A British Standard does not purpo
9、rt to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references International StandardCorresponding British Standard ISO
10、286-2:1988BS EN 20286 ISO system of limits and fits. Part 2:1992 Tables of standard tolerance grades and limit deviations for holes and shafts (Identical) ISO 3353:1992BS 2A 231:1993 Rolled threads for bolts. Lead and runout requirements (identical) ISO 5855-2:1988BS 6293 Aerospace MJ threads. Part
11、2:1994 Limit dimensions for bolts and nuts (Identical) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. Thi
12、s will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:32:47 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 303:1994 BSI 01-20001 1 Scope This International Standard specifies the dimensions of n
13、ormal bihexagonal head bolts, with close or large tolerance normal shank, and short or medium length MJ threads, in metallic material, coated or uncoated, with strength classes less than or equal to 1 100 MPa. It is intended for the drawing up of aerospace product standards. 2 Normative references T
14、he following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard
15、are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 286-2:1988, ISO system of limits and fits Part 2: Tables of standard tolerance grades and lim
16、it deviations for holes and shafts. ISO 3353:1992, Aerospace Rolled threads for bolts Lead and runout requirements. ISO 4095:1978, Fasteners for aerospace construction Bi-hexagonal wrenching configuration. ISO 5855-2:1988, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts. 3 Configura
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-A-303-1994 ISO-3185-1993 BS 303 1994 ISO 3185 1993
链接地址:https://www.31doc.com/p-3737615.html