BS-EN-13531-2001 BS-6912-25-2001.pdf
《BS-EN-13531-2001 BS-6912-25-2001.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13531-2001 BS-6912-25-2001.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13531:2001 BS 6912-25: 2001 Earth-moving machinery Tip-over protection structure (TOPS) for compact excavators Laboratory tests and performance requirements (ISO 12117:1997 modified) The European Standard EN 13531:2001 has the status of a British Standard ICS 53.100; 13.340.99
2、 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN 13531:2001 This British Standard, having been prepared under the direction of the Sector Policy and Strategy Committee for Building and Civil Engineering, was published under the authority of the Standards Policy and Strat
3、egy Committee on 26 September 2001 BSI 26 September 2001 ISBN 0 580 38536 1 National foreword This British Standard is the official English language version of EN 13531:2001. The UK participation in its preparation was entrusted by Technical Committee B/513, Construction equipment and plant and site
4、 safety, to Subcommittee B/513/1, Earth-moving machinery (international), which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publicatio
5、ns referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provision
6、s of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpreta
7、tion, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 20, an inside back cover and a back c
8、over. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13531 August 2001 ICS 53.100 English version Earth-moving machinery - Tip-over protectio
9、n structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified) Engins de terrassement - Structure de protection au basculement (TOPS) pour mini-pelles - Essais de laboratoires et exigences de performance (ISO 12117:1997 modifie) Erdbaumaschinen -
10、Umsturzschutzvorrichtung (TOPS) fr Kompaktbagger - Prfungen und Anforderungen (ISO 12117:1997, modifiziert) This European Standard was approved by CEN on 11 June 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European St
11、andard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French,
12、 German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark,
13、 Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Bru
14、ssels 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13531:2001 E EN 13531:2001 (E) 2 Foreword The text of the International Standard from Technical Committee ISO/TC 127 “Earth-moving machinery” of the International Organizati
15、on for Standardization (ISO) has been taken over with modifications as a European Standard by Technical Committee CEN/TC 151 “Construction equipment and building material machines - Safety“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national stand
16、ard, either by publication of an identical text or by endorsement, at the latest by February 2002, and conflicting national standards shall be withdrawn at the latest by February 2002. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European F
17、ree Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countri
18、es are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Stand
19、ard ISO 12117:1997 has been approved by CEN as a European Standard with agreed common modifications as given below. The informative clause 6.1.4 and the informative Annex B of ISO 12117:1997 dealing with a longitudinal loading test of TOPS have not been taken over in the European Standard. EN 13531:
20、2001 (E) 3 0 Introduction This European Standard is a type C-standard as stated in EN 292. 1Scope This European Standard establishes a consistent and reproducible means of evaluating the load-carrying characteristics of tip-over protective structures (TOPS) under static loading, and prescribes perfo
21、rmance requirements of a representative specimen under such loading. It applies to TOPS of compact excavators (as defined in EN ISO 6165) with swing type boom, having an operating mass (see 3.14) of 1 000 kg to 6 000 kg. 2Normative references This European Standard incorporates, by dated or undated
22、reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when inco
23、rporated in it by Amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 292-1:1991Safety of machinery - Basic concepts, general principles for design Part 1: Basic terminology, methodology EN 292-2:1991Safety of machinery -
24、 Basic concepts, general principles for design Part 2 : Technical principles and specifications EN ISO 898-1:1999Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws, and studs (ISO 898-1:1999) EN 20898-2:1993Mechanical properties of fasteners - Part 2: Nut
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-13531-2001 BS-6912-25-2001 BS EN 13531 2001 6912 25
链接地址:https://www.31doc.com/p-3737639.html