BS-EN-12079-1-2006.pdf
《BS-EN-12079-1-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12079-1-2006.pdf(38页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12079-1:2006 Offshore containers and associated lifting sets Part 1: Offshore containers Design, manufacture and marking The European Standard EN 12079-1:2006 has the status of a British Standard ICS 55.180.10 ? BS EN 12079-1:2006 This British Standard was published under the
2、authority of the Standards Policy and Strategy Committee on 30 June 2006 BSI 2006 ISBN 0 580 48823 3 National foreword This British Standard is the official English language version of EN 12079-1:2006. Together with BS EN 12079-3:2006 it supersedes BS EN 12079:1999 which is withdrawn. The UK partici
3、pation in its preparation was entrusted to Technical Committee TW/1, Freight containers and swap bodies, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement internat
4、ional or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport
5、 to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee a
6、ny enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 34, an insi
7、de back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12079-1 April 2006 ICS 55.180.10Supersedes EN 12079:1999 Eng
8、lish Version Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking Conteneurs pour utilisation en mer et dispositifs de levage associs - Partie 1: Conception, construction et marquage Offshore-Container und zugehrige Anschlaggarnituren - Teil
9、1: Offshore-Container - Auslegung, Herstellung und Kennzeichnung This European Standard was approved by CEN on 9 March 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wi
10、thout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language
11、 made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germ
12、any, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG
13、 Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12079-1:2006: E EN 12079-1:2006 (E) 2 Contents Page Foreword. 3 1 Scope 4 2 Normative references . 4 3 Terms and definition
14、s. 6 4 Symbols . 8 5 Design 8 5.1 General. 8 5.2 Structural strength 9 5.3 Welding 12 5.4 Additional design details 13 5.5 Tank containers. 15 5.6 Containers for bulk solids 16 6 Materials. 16 6.1 Steel General. 16 6.2 Rolled and extruded steels in offshore container structures. 17 6.3 Aluminium 19
15、6.4 Non-metallic materials 20 6.5 Material certificates. 20 7 Type testing. 21 7.1 General. 21 7.2 Test equipment and calibration. 21 7.3 Lifting test 22 7.4 Vertical impact test. 23 7.5 Other tests . 23 8 Production . 24 8.1 General. 24 8.2 Primary structure 24 8.3 Secondary structure. 26 8.4 Produ
16、ction testing 26 8.5 Failure of production containers. 27 9 Marking 27 9.1 Safety marking 27 9.2 Identification markings. 27 9.3 Information markings . 28 9.4 Other markings 28 10 Container Data Plate. 28 10.1 General. 28 10.2 Contents of Data Plate 29 11 Certificate of conformity. 30 11.1 General.
17、30 11.2 Documentation 30 11.3 Contents of the certificate of conformity 30 Annex A (Informative) Certification Requirements for Containers. 32 Bibliography . 34 EN 12079-1:2006 (E) 3 Foreword This document (EN 12079-1:2006) has been prepared by Technical Committee CEN/TC 280 “Offshore containers and
18、 associated lifting sets”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the lates
19、t by October 2006. This document, together with EN 12079-3:2006, supersedes EN 12079:1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denma
20、rk, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 12079-1:2006 (E) 4 1 Scope This part of EN 12079 specifies requ
21、irements for the design, manufacture and marking of offshore freight and service containers with maximum gross mass not exceeding 25000 kg, intended for repeated use to, from and between offshore installations and ships. This part of EN 12079 specifies only transport related requirements. Other part
22、s of the standard are: EN 12079-2, Offshore containers and associated lifting sets - Part 2: Lifting sets Design, manufacture and marking EN 12079-3, Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing 2 Normative references The following referenced
23、 documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 287-1, Qualification test of welders Fusion welding Part 1: S
24、teels EN 473, Non destructive testing - Qualification and certification of NDT personnel - General principles EN 571-1, Non destructive testing - Penetrant testing - Part 1: General principles EN 970, Non-destructive examination of fusion welds Visual examination EN 1289, Non-destructive examination
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 12079 2006
链接地址:https://www.31doc.com/p-3737656.html