BS-EN-10244-1-2009.pdf
《BS-EN-10244-1-2009.pdf》由会员分享,可在线阅读,更多相关《BS-EN-10244-1-2009.pdf(12页珍藏版)》请在三一文库上搜索。
1、BS EN 10244-1:2009 ICS 25.220.40; 77.140.65 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Steel wire and wire products Non- ferrous metallic coatings on steel wire Part 1: General principles Licensed CopyChinese University of Hong Kong, 12/06/2009 03:03, Unc
2、ontrolled Copy, (c) BSI This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2009. BSI 2009 ISBN 978 0 580 62602 9 Amendments/corrigenda issued since publication DateComments BS EN 10244-1:2009 National foreword This British Standard is the
3、 UK implementation of EN 10244-1:2009. It supersedes BS EN 10244-1:2001 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/26, Steel wire. A list of organizations represented on this committee can be obtained on request to its secretary. This publica
4、tion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Licensed CopyChinese University of Hong Kong, 12/06/2009 03:03, Uncontrolled Copy, (c) BSI
5、 BS EN 10244-1:2009 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10244-1 April 2009 ICS 25.220.40; 77.140.65Supersedes EN 10244-1:2001 English Version Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles Fils et produits trfils en acier - Re
6、vtements mtalliques non ferreux sur fils dacier - Partie 1 : Principes gnraux Stahldraht und Drahterzeugnisse - berzge aus Nichteisenmetall auf Stahldraht - Teil 1: Allgemeine Regeln This European Standard was approved by CEN on 13 December 2008. CEN members are bound to comply with the CEN/CENELEC
7、Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN
8、 member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN
9、members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swed
10、en, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. R
11、ef. No. EN 10244-1:2009: E Licensed CopyChinese University of Hong Kong, 12/06/2009 03:03, Uncontrolled Copy, (c) BSI BS EN 10244-1:2009 EN 10244-1:2009 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Requirements relating to coating .4 4.1 Requirements
12、 for the specific type of metal and alloy 4 4.2 Coating mass .4 4.3 Appearance of coating 5 4.4 Special finishes 5 4.5 Adherence of coating 5 5 Test conditions 5 5.1 Selection of samples .5 5.2 Determination of mass of coating 6 5.2.1 Gravimetric method .6 5.2.2 Other methods .7 5.3 Adherence test .
13、7 5.4 Retests 8 Licensed CopyChinese University of Hong Kong, 12/06/2009 03:03, Uncontrolled Copy, (c) BSI BS EN 10244-1:2009 EN 10244-1:2009 (E) 3 Foreword This document (EN 10244-1:2009) has been prepared by Technical Committee ECISS/TC 30 “Steel wires”, the secretariat of which is held by AFNOR.
14、This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at the latest by October 2009. Attention is drawn to the possibility that some o
15、f the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 10244-1:2001. This European Standard for non-ferrous metallic coating on steel wire is made up of the follo
16、wing parts: Part 1: General principles Part 2: Zinc or zinc alloy coatings Part 3: Aluminium coatings Part 4: Tin coatings Part 5: Nickel coatings Part 6: Copper, bronze or brass coatings According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countri
17、es are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
18、 Sweden, Switzerland and the United Kingdom. Licensed CopyChinese University of Hong Kong, 12/06/2009 03:03, Uncontrolled Copy, (c) BSI BS EN 10244-1:2009 EN 10244-1:2009 (E) 4 1 Scope This part of this European Standard specifies the requirements for the mass, other properties and testing of non-fe
19、rrous metal coatings on steel wire and steel wire products of circular or other cross-section. This European Standard deals with requirements of general application and is of use for those coatings for which no particular requirements have been laid down in (EN 10244-2 to EN 10244-6). Deviations are
20、 possible, particularly if required for well-defined products. In such cases, appropriate requirements should be part of the relevant product standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edi
21、tion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10021, General technical delivery conditions for steel products EN 10218-1, Steel wire and wire products General Part 1: Test methods 3 Terms and definitions For the purpo
22、ses of this document, the following terms and definitions apply. 3.1 wire with non-ferrous metallic coating wire to which a non-ferrous metallic coating has been applied. NOTE Depending on the metal, the coating may be obtained by dipping in a bath of molten metal, by conversion using a bath of meta
23、llic salts in solution, by extrusion, by cladding, by electroplating using an electrolytic solution or by other methods. 4 Requirements relating to coating 4.1 Requirements for the specific type of metal and alloy The type, quality and grade of coating metal or alloy shall be stated at the time of e
24、nquiry and order. 4.2 Coating mass The coating mass shall be explicitly specified, preferably by reference to the appropriate product standard. If not the appropriate part of this European Standard shall apply. The mass of the coating shall preferably be expressed as being the mass of coating per un
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10244 2009
链接地址:https://www.31doc.com/p-3737691.html