《BS-CECC-90202-1990.pdf》由会员分享,可在线阅读,更多相关《BS-CECC-90202-1990.pdf(24页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS CECC 90202:1990 Incorporating Amendment No. 1 Specification for Harmonized system of quality assessment for electronic components Blank detail specification Integrated operational amplifiers Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 17:
2、05:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS CECC 90202:1990 BSI 03-2000 ISBN 0 580 35828 3 Amendments issued since publication Amd. No.Date of issueComments 8293August 1994Indicated by a sideline in the margin Licensed Copy: London South Bank University, London South Bank University, Fri Dec
3、 08 17:05:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS CECC 90202:1990 BSI 03-2000i Contents Page National forewordii Forewordiii Text of CECC 902021 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 17:05:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS CECC
4、90202:1990 ii BSI 03-2000 National foreword This British Standard has been prepared under the direction of the Electronic Components Standards Policy Committee. It is identical with CENELEC Electronic Components Committee CECC 90202:1989 “Harmonized system of quality assessment for electronic compon
5、ents. Blank detail specification: Integrated operational amplifiers”, as amended by Amendment No. 1 published in 1994. This standard is a harmonized specification within the CECC System. BS CECC 90202:1985 remains valid for existing qualification approvals until further notice. Cross-references. The
6、 British Standard which implements CECC 00100 is BS 9000 General requirements for a system for electronic components of assessed quality Part 2:1983 Specification for national implementation of CECC basic rules and rules of procedure. The Technical Committee has reviewed the provisions of IEC 747, I
7、EC 748 and IEC 749, to which reference is made in the text, and has decided that they are acceptable for use in conjunction with this standard. Scope. This standard lists the ratings, characteristics and inspection requirements which shall be included as mandatory requirements in accordance with BS
8、CECC 90200 in any detail specification for these devices. Detail specification layout. The front page of detail specifications released to BS CECC family or blank detail specification will be in accordance with BS 9000 Circular Letter No. 15. A British Standard does not purport to include all the ne
9、cessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. International Standardsa Corresponding British Standards IEC 68-2-30:1980BS 2011 Environmental tes
10、ting Part 2.1 Db:1981 Test Db and guidance: Damp heat, cyclic 12 + 12 hour cycle (Identical) CECC 90000:1985BS CECC 90000:1985 Harmonized system of quality assessment for electronic components. Generic specification: Monolithic integrated circuits (Identical) CECC 90100:1986BS CECC 90100:1986 Harmon
11、ized system of quality assessment for electronic components: Sectional specification: Digital monolithic integrated circuits (Identical) CECC 90200:1987BS CECC 90200:1988 Harmonized system of quality assessment for electronic components: Sectional specification: Analogue monolithic integrated circui
12、ts (Identical) a Undated in text. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the CECC title page, pages ii to iv, pages 1 to 14 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This wil
13、l be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 17:05:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 17:05:01 GM
14、T+00:00 2006, Uncontrolled Copy, (c) BSI BS CECC 90202:1990 ii BSI 03-2000 Contents Page Forewordiii 1Front page1 2Ratings (limiting values)3 3Recommended conditions of use and associated characteristics3 4Test conditions and inspection requirements4 Annex A Electrical endurance operating mode13 Lic
15、ensed Copy: London South Bank University, London South Bank University, Fri Dec 08 17:05:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS CECC 90202:1990 BSI 03-2000iii Foreword The CENELEC Electronic Components Committee (CECC) is composed of those member countries of the European Committee for Ele
16、ctrotechnical Standardization (CENELEC) who wish to take part in a harmonized System for electronic components of assessed quality. The object of the System is to facilitate international trade by the harmonization of the specifications and quality assessment procedures for electronic components, an
17、d by the grant of an internationally recognized Mark, or Certificate, of Conformity. The components produced under the System are thereby acceptable in all member countries without further testing. This specification has been formally approved by the CECC, and has been prepared for those countries t
18、aking part in the System who wish to issue national harmonized specifications for INTEGRATED OPERATIONAL AMPLIFIERS. It should be read in conjunction with the current regulations for the CECC System. At the date of printing of this specification the member countries of the CECC are Austria, Belgium,
19、 Denmark, Finland, France, Germany, Ireland, Italy, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom, and copies of it can be obtained from the addresses shown on the blue fly sheet. Preface This blank detail specification (BDS) was prepared by CECC WG9 “INTEGRAT
20、ED CIRCUITS”. It is based, wherever possible, on the Publications of the International Electrotechnical Commission and in particular on IEC 747: Semiconductor devices: Discrete devices and integrated circuits, IEC 748: Semiconductor devices: Integrated circuits, IEC 749: Semiconductor devices: Mecha
21、nical and climatic test methods. The text of this second Issue consists of the text of CECC 90202 Issue 1 (1985) amended in accordance with the ratified new material introduced by the following document. It is recognized that the layout proposed cannot apply to all detail specifications based on thi
22、s document. For example when several similar devices are covered by the same detail specification, it may be convenient to give the limiting values in a table. In accordance with the decision of the CECC Management Committee this specification is published initially in French and English. The German
23、 text will follow as soon as it has been prepared. Effective date This second Issue of CECC 90202 shall become effective for all new qualification approvals on 18 December 1989. Issue 1 will continue to remain effective to cover all past approvals. DocumentDate of VotingReport on the Voting CECC (Se
24、cretariat) 2166February 1988CECC (Secretariat) 2297 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 17:05:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI iv blank Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 17:05:01 GMT+00
25、:00 2006, Uncontrolled Copy, (c) BSI BS CECC 90202:1990 BSI 03-20001 1 Front page The front page of the DS shall be laid out as shown on the following page. The numbers between square brackets correspond to the following indications which shall be given: Identification of the DS and of the component
26、: 1 The name of the National Standards Organization under whose authority the DS is published and, if applicable, the organization from whom the DS is available. 2 The CECC Symbol and the CECC number allotted to the DS by the CECC General Secretariat. 3 The number and issue number of the CECC generi
27、c or sectional specification as relevant; also national reference if different. 4 If different from the CECC number, the national number of the DS, date of issue and any further information required by the national system, together with any amendment numbers. 5 Type number, a short description of th
28、e type by: function (for example differential inputs operational amplifier) number of independent circuits per package number and kind of inputs and outputs material and type of construction (silicon, monolithic, multichip, bipolar, MOS, etc.) performance, for example high output power, high speed,
29、low power consumption electrostatic sensitivity (where appropriate). 6 Information on typical construction (if applicable) For 5 and 6 the text to be given in the DS should be suitable for an entry in CECC 00200 or CECC 00300. 7 An outline drawing with main dimensions which are of importance for int
30、erchangeability, and/or reference to the appropriate national or international document for outlines. Alternatively, this drawing may be given in an annex to the DS. 8 Quality assessment level(s) 9 Reference data giving information on the most important properties of the component, which allow compa
31、rison between the various component types intended for the same, or for similar, applications. Identification of the component and supplementary information: Description of the materials for the package (for example, glass, ceramic, silicone) and information relating to the mounting (welding, solder
32、ing), lead material and finish. Inside the sketch of the package, the terminal connections to the inputs, outputs or other important points of the circuit shall be identified. This can be shown by a functional block diagram. Description of the numbering of the terminals with the identification of pi
33、n number 1. Marking on the device in accordance with the GS (see 2.5 of CECC 90000). Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 17:05:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS CECC 90202:1990 2 BSI 03-2000 Layout for front page of detail specificatio
34、n Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 17:05:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS CECC 90202:1990 BSI 03-20003 2 Ratings (limiting values) (Not for inspection purposes) These apply over the operating temperature range, unless otherwise sta
35、ted (see CECC 90200). 3 Recommended conditions of use and associated characteristics (not for inspection purpose) The following characteristics shall apply over the full ambient operating temperature range unless otherwise specified. Where the stated performance of the circuit varies over the ambien
36、t operating temperature range the values of the input and output voltages and their associated currents shall be stated at 25 C and at the extremes of the operating temperature range. Where it is necessary to use external elements to ensure stable operation of the amplifier, the values of the charac
37、teristics specified refer to the amplifier with such elements connected. 2.1Maximum (and where appropriate minimum) value of voltage between the reference terminal and each of the other terminals. 2.2Any other limiting value(s) of voltage between any specified terminals as appropriate. 2.3Maximum co
38、ntinuous output current.IO 2.4Maximum continuous internal power dissipation with reference to a derating curve or factor related to the reference point temperature or ambient temperature. PD 2.5Maximum common mode input voltage.VIC 2.6Maximum differential mode input voltage.VID 2.7Maximum and minimu
39、m ambient or reference point operating temperature. Tamb 2.8Maximum and minimum storage temperature.Tstg 2.9Any specific mechanical or environmental ratings peculiar to the device. 2.10Any interdependence of limiting conditions. 2.11Maximum value of output short-circuit current and duration (where a
40、ppropriate). IOS, tOS CharacteristicsSymbolMethod (See 4.1.1 of CECC 90200) 3.0General measurement conditions and corresponding figures.+ VCC, VEE 3.1Input voltage(s).VI 3.2Output voltage.VO 3.3Output current (if applicable).IO 3.4Power supply currents.ISA-01 3.5Small signal input impedance (if appl
41、icable).ZiA-02 3.6Output impedance (if applicable).ZoA-03 3.7Input offset voltage of a differential input integrated amplifier (where appropriate) VIOA-04 3.8Bias voltage of a single ended input integrated amplifier (where appropriate) VIBA-04 3.9Input offset current.IOA-05 3.10Input bias current.II
42、BA-06 3.11Input offset voltage temperature coefficient (if applicable).!VIOA-07 3.12Input offset current temperature coefficient (if applicable).!IIOA-08 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 17:05:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS CECC
43、90202:1990 4 BSI 03-2000 4 Test conditions and inspection requirements See 3.6 of CECC 90000 with the following special requirements: The values and exact test conditions to be used shall be specified as required in the detail specification relevant to a given type, in line with the indications give
44、n in CECC 90200 for the relevant test. External elements necessary to ensure stable operation shall be specified and shall be connected for all electrical tests. CharacteristicsSymbolMethod (See 4.1.1 of CECC 90200) 3.14Open-loop differential mode voltage amplification (where appropriate). AVDA-09 3
45、.15Cut-off frequency (frequencies, high and low) (if applicable, see note 5 of Sub-Group A5). fa, fbA-10 3.16Common mode rejection ratio (at 25 C only) of differential input operational amplifier (where appropriate). kCMRA-11 3.17Supply voltage(s) rejection ratio (at 25 C only).kSVRA-12 3.18Output v
46、oltage range for differential amplifiers (d.c. measurement only). VOPPA-13 3.19Response times (if applicable)A-14 delay time rise time fall time ripple time total response time td tr tf trip ttot 3.20Noise (if applicable)A-15 noise voltage noise current and burst noise Vn In Vbn 3.21Average rate of
47、change of the output voltage (if applicable: see note 5 of Sub-Group A5). SVOAVA-16 3.22Real Gain-Bandwidth product (where appropriate).GWrA-17 3.23Crosstalk attenuation between any two channels (where appropriate) actS-05 (See 4.1 of CECC 90100) 3.24Output short-circuit currentIOS4.1.4 Licensed Cop
48、y: London South Bank University, London South Bank University, Fri Dec 08 17:05:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS CECC 90202:1990 BSI 03-20005 Examination or test D ND Conditions of test Limits to be specified Group A Inspection Sub-Group A2 Verification of the function at 25 C GS/Not
49、e 5 ND Open loop voltage amplification Method SS2/A-09 See relevant DSAVB OROR Open loop differential mode voltage amplification Method SS2/A-09 AVDB Sub-Group A3 Static characteristics at 25 C ND Power supply current(s) Method SS2/A-01 See relevant DSISA Input offset voltage Method SS2/A-04 See relevant DSVIOA Input offset current Method SS2/A-05 See relevant DSIIOA Input bias current Method SS2/A-06 See relevant DSIIBA Output voltage range Method SS2/A-13 See relevant DSVOPPB Output short-circuit current Method SS1/4.1.4 Se
链接地址:https://www.31doc.com/p-3737703.html