BS-EN-13611-2007.pdf
《BS-EN-13611-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13611-2007.pdf(78页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13611:2007 Safety and control devices for gas burners and gas burning appliances General requirements The European Standard EN 13611:2007 has the status of a British Standard ICS 23.060.40 ? Licensed Copy: London South Bank University, London South Bank University, Thu Dec 20
2、02:42:36 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 13611:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2007 BSI 2007 ISBN 978 0 580 55537 4 National foreword This British Standard is the UK implementation of EN 13611
3、:2007. It supersedes BS EN 13611:2000 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee GSE/22, Safety and control devices for gas and oil burners and gas burning appliances. A list of organizations represented on this committee can be obtained on reque
4、st to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments
5、 Licensed Copy: London South Bank University, London South Bank University, Thu Dec 20 02:42:36 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13611 November 2007 ICS 23.060.40Supersedes EN 13611:2000 English Version Safety and control devices for gas
6、 burners and gas burning appliances - General requirements Equipements auxiliaires pour brleurs gaz et appareils gaz - Exigences gnrales Sicherheits-, Regel- und Steuereinrichtungen fr Gasbrenner und Gasgerte - Allgemeine Anforderungen This European Standard was approved by CEN on 7 October 2007. CE
7、N members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on app
8、lication to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre
9、 has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
10、 Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CENAll rights of exploitation in any form and by any
11、 means reserved worldwide for CEN national Members. Ref. No. EN 13611:2007: E Licensed Copy: London South Bank University, London South Bank University, Thu Dec 20 02:42:36 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 13611:2007 (E) 2 Contents Page Foreword. 3 1 Scope . 4 2 Normative references. 4
12、3 Terms and definitions . 6 4 Classification. 10 5 Units of measurement and test conditions 11 6 Construction requirements 12 7 Performance 22 8 EMC/Electrical requirements. 33 9 Marking, installation and operating instructions 40 Annex A (informative) Gas connections in common use in the various co
13、untries. 41 Annex B (informative) Leak-tightness test volumetric method 42 Annex C (informative) Leak-tightness test pressure loss method. 44 Annex D (normative) Conversion of pressure loss into leakage rate. 46 Annex E (normative) Electrical/electronic component fault modes . 47 Annex F (normative)
14、 Additional requirements for safety accessories and pressure accessories as defined in EU Directive 97/23/EC. 50 Annex G (normative) Materials for pressurized parts 52 Annex H (informative) Additional materials for pressurized parts 53 Annex I (normative) Requirements for controls used in DC supplie
15、d gas burners and gas burning appliances . 61 Annex ZA (informative) Clauses of this European Standard addressing requirements or provisions of EU-Directives. 65 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Pressure Equipment Directive 97/23
16、/EC. 68 Bibliography. 70 Licensed Copy: London South Bank University, London South Bank University, Thu Dec 20 02:42:36 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 13611:2007 (E) 3 Foreword This document (EN 13611:2007) has been prepared by Technical Committee CEN/TC 58 “Safety and control devices
17、 for gas-burners and gas-burning appliances”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2008, and conflicting national standards shall be withdra
18、wn at the latest by May 2008. This document supersedes EN 13611:2000. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document ha
19、s been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Directive(s), see informative Annexes ZA or B, which are an integral part of this document. For additional
20、 requirements for safety accessories and pressure accessories as defined in EU-Directive 97/23/EC see normative Annex F. For controls used in DC supplied gas burners and gas burning appliances see additional requirements in normative Annex I. This European Standard covers type testing only. Tests in
21、tended for production testing are not specifically included. This standard recognizes the safety level specified by CEN/TC 58 and is regarded as a horizontal standard dealing with the safety, construction and performance of controls for gas burners and gas burning appliances and to their testing. Th
22、is European Standard should be used in conjunction with the specific standard for a specific type of control, (e. g. EN 88-1, EN 88-2, EN 125, EN 126, EN 161, EN 257, EN 298, EN 1106, EN 1643, EN 1854, EN 12067- 1 and EN 12067-2, EN 12078) or for controls for specific applications. This standard may
23、 also be applied, so far as reasonable, to controls not mentioned in a specific standard and to controls designed on new principles, in which case additional requirements may be necessary. Other control standards should make use of this standard by adapting this standard and stating “addition“, “mod
24、ification“ or “replacement“ in their corresponding clauses. This 2nd edition of EN 13611 includes EN 13611:2000/A1:2004 and new 6.5 Electric parts of the control and 6.6. Protection against internal faults for the purpose of functional safety. Annex G contains a list of materials which meet the esse
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13611 2007
链接地址:https://www.31doc.com/p-3737749.html