BS-AU-265-1-1997 ISO-6518-1-1997.pdf
《BS-AU-265-1-1997 ISO-6518-1-1997.pdf》由会员分享,可在线阅读,更多相关《BS-AU-265-1-1997 ISO-6518-1-1997.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD AUTOMOBILE SERIES BS AU 265-1:1997 ISO 6518-1: 1997 Road vehicles Ignition systems Part 1: Vocabulary ICS 01.040.43; 43.060.50 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 16:56:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 265-1:1997 T
2、his British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 August 1997 BSI 09-1999 ISBN 0 580 28044 6 National foreword This British Standard reproduces verbatim ISO 6518-1:1997
3、and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee MCE/9, Ignition equipment for spark ignition engines, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European c
4、ommittee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-r
5、eferences The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or using the “Find” facility of the BSI Standards Electronic Cata
6、logue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document com
7、prises a front cover, an inside front cover, pages i and ii, the ISO title page, pages ii to iv, pages 1 to 10 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amen
8、dments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 16:56:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 265-1:1997 BSI 09-1999i Contents Page National forewordInside front cover Forewordiii Text of ISO 6518-
9、11 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 16:56:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 16:56:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Cop
10、y: London South Bank University, London South Bank University, Fri Dec 08 16:56:20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 265-1:1997 ii BSI 09-1999 Contents Page Forewordiii 1Scope1 2Normative reference1 3Types of ignition systems2 4Types of ignition coils3 5Parameters4 Alphabetical index9
11、 Descriptors: Road vehicles, motor vehicles, controlled ignition engines, ignition systems, vocabulary. /Descripteurs: Vhicule routier, vhicule moteur, moteur allumage command, systme dallumage, vocabulaire. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 16:56:
12、20 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 265-1:1997 BSI 09-1999iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through IS
13、O technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates c
14、losely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council
15、. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 6518-1 was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 1, Ignition equipment. This second edition cancels and replaces the firs
16、t edition (ISO 6518-1:1980), which has been technically revised. ISO 6518 consists of the following parts, under the general title Road vehicles Ignition systems: Part 1: Vocabulary; Part 2: Electrical performance and function test methods. Licensed Copy: London South Bank University, London South B
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-AU-265-1-1997 ISO-6518-1-1997 BS AU 265 1997 ISO 6518
链接地址:https://www.31doc.com/p-3737766.html