BS-EN-12062-1998.pdf
《BS-EN-12062-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12062-1998.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12062:1998 Incorporating Amendments Nos.1 and 2 Non-destructive examination of welds General rules for metallic materials The European Standard EN 12062:1997, with the incorporation of amendments A1:2002 and A2:2003, has the status of a British Standard ICS 25.160.40 ? BS EN 1
2、2062:1998 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 January 1998 BSI 26 March 2004 ISBN 0 580 28699 1 National foreword This British Standard is the English lan
3、guage version of EN 12062:1997, including amendments A1:2002 and A2:2003. The start and finish of text introduced or altered by CEN amendment is indicated in the text by tags !“. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1
4、is indicated by !“. As agreed by CEN/TC 121/SC 5 resolution 134/2000 and in accordance with amendment A1:2002, the term “examination” has been replaced by “testing” throughout the document. The UK participation in its preparation was entrusted to Technical Committee WEE/46, Non-destructive testing,
5、which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the s
6、ection entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application
7、. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 14, an inside back cover and a back cover. The BSI copyright notice displayed in this document
8、indicates when the document was last issued. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate th
9、em in the UK. Amendments issued since publication Amd. NoDateComments 139861 November 2002See national foreword 1493426 March 2004Revision to foreword page and deletion of Annex ZA EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12062 August 1997 + A1 May 2002 + A2 December 2003 ICS 25.160.40 D
10、escriptors: Welded joints, steels, aluminium, copper, nickel, titanium, alloys, non destructive tests, quality control, weld defects, qualification, personnel, approved organizations, comparison English version Non-destructive examination of welds General rules for metallic materials (includes amend
11、ments A1:2002 and A2:2003) Contrle non destructif des assemblages souds Rgles gnrales pour les matriaux mtalliques (inclut les amendements A1:2002 et A2:2003) Zerstrungsfreie Prfung von Schweiverbindungen Allgemeine Regeln fr metallische Werkstoffe (enthlt nderungen A1:2002 und A2:2003) This Europea
12、n Standard was approved by CEN on 1997-08-02, amendment A1 was approved by CEN on 2002-05-01, and amendment A2 was approved by CEN on 2003-11-20. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a
13、 national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version
14、in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France,
15、Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart
16、36, B-1050 Brussels 1997 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12062:1997 + A1:2002 + A2:2003 E EN 12062:1997 BSI 26 March 2004 2 Foreword This European Standard has been prepared by Technical Committee CEN/TC 121, Weldin
17、g, the Secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 1998, and conflicting national standards shall be withdrawn at the latest by February 1998. This
18、 document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belg
19、ium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This document EN 12062:1997/A1:2002 has been prepared by Technical Committee CEN/TC 121, Wel
20、ding, the Secretariat of which is held by DS. This amendment to the European Standard EN 12062:1997 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at
21、 the latest by November 2002. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral
22、 part of this document. Annex ZA is normative, Annex C and Annex D are informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, Fr
23、ance, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A2 This document EN 12062:1997/A2:2003 has been prepared by Technical Committee CEN/TC 121, Welding, the Secretariat of which is held by
24、 DS. This Amendment to the European Standard EN 12062:1997 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2004, and conflicting national standards shall be withdrawn at the latest by June 2004. This document has b
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 12062 1998
链接地址:https://www.31doc.com/p-3737842.html