BS-EN-1158-1997.pdf
《BS-EN-1158-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-1158-1997.pdf(30页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1158:1997 Incorporating Amendment No. 1 and Corrigenda Nos. 1 Building hardware Door coordinator devices Requirements and test methods The European Standard EN 1158:1997, with the incorporation of amendment A1:2002, has the status of a British Standard ICS 91.190 ? and 2 Licen
2、sed Copy: sheffieldun sheffieldun, na, Thu Oct 26 12:04:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 1158:1997 This British Standard, having been prepared under the direction of the Sector Board for Building and Civil Engineering, was published under the authority of the Standards Board and c
3、omes into effect on 15 August 1997 BSI August 2006 The following BSI references relate to the work on this standard: Committee reference B/538 Draft for comment 93/108726 DC ISBN 0 580 27919 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted to
4、Technical Committee B/538, Waste management, upon which the following bodies were represented: Association of Builders Hardware Manufacturers British Plastics Federation British Woodworking Federation Chartered Institute of Building Council for Aluminium in Building Department of the Environment (Bu
5、ilding Research Establishment) Door and Shutter Manufacturers Association Flat Glass Manufacturers Association Glass and Glazing Federation Guild of Architectural Ironmongers Institute of Architectural Ironmongers National House-building Council Royal Institute of British Architects Steel Window Ass
6、ociation The following bodies were also represented in the drafting of the standard, through subcommittees and panels: Association of Building Component Manufacturers Association of Building Engineers British Security Industry Association Consumer Policy Committee of BSI LHC Building Components and
7、Services Loss Prevention Council Amendments issued since publication Amd. No.DateComments 1407620 February 2003See revised national foreword 14398 Corr. No. 1 13 March 2003National foreword corrected 16310 August 2006 Changes made to Clause ZA.3. Corrigendum No. 2 Licensed Copy: sheffieldun sheffiel
8、dun, na, Thu Oct 26 12:04:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 1158:1997 BSI 13 March 2003 i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 11583 Bibliography25 Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 12:04:45 GMT+00:00 2
9、006, Uncontrolled Copy, (c) BSI BS EN 1158:1997 ii BSI 13 March 2003 National foreword This British Standard is the official English language version of EN 1158:1997, including amendment A1:2002 and Corrigendum February 2006, published by the European Committee for Standardization (CEN). The start a
10、nd finish of text introduced or altered by CEN amendment A1 is indicated in the text by tags ?. EN 1158:1997 (as amended) is a candidate “harmonized” European Standard and fully takes into account the requirements of the European Commission mandate M/101, Doors, windows, shutters, gates and related
11、hardware, given under the EU Construction Products Directive (89/106/EEC), and intended to lead to CE marking. The date of applicability of EN 1158:1997 (as amended) as a “harmonized” European Standard, i.e. the date after which this standard may be used for CE marking purposes, is subject to an ann
12、ouncement in the Official Journal of the European Communities. The Commission in consultation with Member States have agreed a transition period for the co-existence of “harmonized” European Standards and their corresponding national standard(s). It is intended that this period will comprise a perio
13、d, usually nine months, after the date of availability of the European Standard, during which any required changes to national regulations are to be made, followed by a further period, usually twelve months, for the implementation of CE marking. At the end of this co-existence period, the national s
14、tandard(s) will be withdrawn. Since BS EN 1158:1997 is the current national standard the changes introduced by amendment no. 1 may be implemented from nine months after publication. Based on this normal transition period of twenty-one months, BS EN 1158:1997 (as amended) would be fully effective in
15、September 2004. NOTEThis date is approximate. Users of this standard should contact BSI Customer Services for confirmation of withdrawal. The UK participation in its preparation was entrusted by Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling, to its Subcommittee B/
16、538/4, Building hardware, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European develo
17、pments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its Secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under
18、the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applic
19、ation. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 25 and a back cover. The BSI copyright notice displayed in this document i
20、ndicates when the document was last issued. Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 12:04:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1158 February 1997 + A1 December 2002 ICS 91.190.00 Descriptors: Hardware, buildings, doors, hin
21、ged doors, fire doors, door leaves, door closing devices, selection, definitions, classifications, specifications, performance evaluation, installation, tests, fatigue tests, performance tests, corosion resistance, marking English version Building hardware Door coordinator devices Requirements and t
22、est methods (includes amendment A1:2002) Quincaillerie pour le btiment Dispositifs de slection de vantaux Prescriptions et mthodes dessai (inclut lamendement A1:2002) Schlsser und Baubeschlge Schliefolgeregler Anforderungen und Prfverfahren (enthlt nderung A1:2002) This European Standard was approve
23、d by CEN on 1997-01-17 and amendment A1 was approved by CEN on 2002-11-07. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliog
24、raphical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 1158 1997
链接地址:https://www.31doc.com/p-3737854.html