BS-EN-12385-2-2002.pdf
《BS-EN-12385-2-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-12385-2-2002.pdf(56页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12385-2:2002 Steel wire ropes Safety Part 2: Definitions, designation and classification The European Standard EN 12385-2:2002 has the status of a British Standard ICS 77.140.65 ? BS EN 12385-2:2002 This British Standard, was published under the authority of the Standards Poli
2、cy and Strategy Committee on 24 July 2003 BSI 24 July 2003 ISBN 0 580 42308 5 National foreword This British Standard is the official English language version of EN 12385-2:2002. The UK participation in its preparation was entrusted to Technical Committee MHE/2, Wire ropes, which has the responsibil
3、ity to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “Internat
4、ional Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a Briti
5、sh Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and
6、 European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 53 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued s
7、ince publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12385-2 December 2002 ICS 77.140.65 English version Steel wire ropes - Safety - Part 2: Definitions, designation and classification Cbles en acier - Scurit - Partie 2: Dfinitions, dsignation et classification
8、 Stahldrahtseile - Sicherheit - Teil 2: Begriffe, Bezeichnungen und Klassifizierung This European Standard was approved by CEN on 10 October 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of
9、a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version i
10、n any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Ger
11、many, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CEN
12、All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12385-2:2002 E EN 12385-2:2002 (E) 2 Contents page Foreword3 1Scope 4 2Normative references 4 3Terms and definitions4 4Rope designation.28 5Classification37 Annex A (informative) Elements
13、 of a rope42 Annex B (informative) More examples of the designation system.43 Annex C (informative) Index for definitions (in alphabetical order).49 Annex ZA (informative) Relationship of this document with EC Directives.51 Bibliography53 EN 12385-2:2002 (E) 3 Foreword This document (EN 12385-2:2002
14、) has been prepared by Technical Committee CEN/TC 168, “Chains, ropes, webbing, slings and accessories - Safety“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the lat
15、est by June 2003, and conflicting national standards shall be withdrawn at the latest by June 2003. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationshi
16、p with EU Directive(s), see informative annex ZA, which is an integral part of this document. The other parts of this European Standard are: Part 1: General requirements Part 3: Information for use and maintenance Part 4: Stranded ropes for general lifting applications Part 5: Stranded ropes for lif
17、ts Part 6: Stranded ropes for mine shafts Part 7: Locked coil ropes for mine shafts Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons Part 9: Locked coil carrying ropes for cableway installations designed to carry persons Part 10: Spiral ropes f
18、or general structural applications Part 1 provides the general requirements of Parts 4 to 10. This is the first edition of this Part. Annexes A, B and C are informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to im
19、plement this European Standard : Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. EN 12385-2:2002 (E) 4 Introduction This part of this European St
20、andard has been prepared to support Parts 4 to 10 that concern themselves with the particular requirements for steel wire ropes for use in specific applications. The rope designation system described in clause 4 is provided with the intention of it being used to describe the rope in the certificate
21、or inspection document referred to in the other Parts. The rope classification system described in clause 5 is provided to define which constructions apply to a specific rope class. The designation and classification systems described in clauses 4 and 5 respectively may also be used for ropes not co
22、vered by the other parts of this standard. 1 Scope This part of this European Standard defines terms, specifies designations and classifies steel wire ropes and is for use in conjunction with all other parts of this standard. It applies to ropes that have been manufactured after the date of issue of
23、 the standard. 2 Normative references Not applicable. 3 Terms and definitions For the purposes of this part of EN 12385, the following terms and definitions apply. 3.1 Wires 3.1.1 outer wires all wires positioned in the outer layer of a spiral rope or in the outer layer of wires in the outer strands
24、 of a stranded rope 3.1.2 inner wires all wires of intermediate layers positioned between the centre wire and outer layer of wires in a spiral rope or all other wires except centre, filler, core and outer wires in a stranded rope 3.1.3 filler wires wires used in filler constructions to fill up the i
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 12385 2002
链接地址:https://www.31doc.com/p-3737903.html