BS-EN-13499-2003.pdf
《BS-EN-13499-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13499-2003.pdf(22页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13499:2003 Thermal insulation products for buildings External thermal insulation composite systems (ETICS) based on expanded polystyrene Specification The European Standard EN 13499:2003 has the status of a British Standard ICS 91.100.60 ? Licensed Copy: sheffieldun sheffieldu
2、n, na, Mon Oct 30 09:49:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13499:2003 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 15 September 2003 BSI 15 September 2003 ISBN 0 580 42614 9 National foreword This British Standard is the
3、official English language version of EN 13499:2003. The UK participation in its preparation was entrusted by Technical Committee B/540, Energy performance of materials, components and buildings, to Subcommittee B/540/1, European standards for thermal insulation, which has the responsibility to: A li
4、st of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Sta
5、ndards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standa
6、rd does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European
7、 developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 18, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendm
8、ents issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 09:49:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13499 August 2003 ICS 91.100.60 English version Thermal insulation products for building
9、s - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification Produits isolants thermiques pour btiments - Systmes composites disolation thermique par lextrieur base de polystyrne expans (ETICS) - Spcification Wrmedmmstoffe fr Gebude - Auenseitige Wrmedmm-Ve
10、rbundsysteme (WDVS) aus expandiertem Polystyrol - Spezifikation This European Standard was approved by CEN on 10 July 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard wit
11、hout any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language ma
12、de by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary,
13、Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll
14、rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13499:2003 E Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 09:49:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13499:2003 (E) 2 Contents Foreword3 1Scope 4 2Normative references 4
15、 3Terms, definitions, symbols, units and abbreviated terms.5 3.1Terms and definitions5 3.2Symbols, units and abbreviated terms7 4Requirements.7 4.1General7 4.2Thermal resistance 7 4.3Mechanical resistance and stability of the system 8 4.3.1Bond strength of the base coat to the EPS board8 4.3.2Bond s
16、trength of the adhesive to the EPS board for ETICS fixed by an adhesive.8 4.3.3Pull-off resistance of the ETICS fixed by mechanical fixing.8 4.4Reaction to fire.9 4.5EPS boards.9 4.6Tensile strength of the reinforcement .9 4.7Liquid water permeability of the system surface .10 4.8Resistance to impac
17、t.10 4.9Resistance to penetration.10 4.10Water vapour permeability10 4.11Durability and adhesion of the finishing material on the base coat.11 5Test methods11 5.1Sampling.11 5.2Conditioning.11 5.2.1Conditioning of the test specimen for the determination of the tensile bond strength of the adhesive t
18、o the thermal insulation material11 5.2.2Conditioning of the test specimen in accordance with EN 1062-11 for the determination of the tensile bond strength of the base coat to the thermal insulation material, liquid water permeability of the system surface, resistance to impact, resistance to penetr
19、ation, water vapour permeability, durability and adhesion of the finishing material on the base coat.11 5.3Testing 12 6Designation code.13 7Evaluation of conformity.13 8Marking and labelling 13 8.1The entire and specific information of all components of the kit has to be given on an accompanying doc
20、ument that contains:.13 8.2Components conforming to this standard shall be clearly marked, either on the product or on the label with the following information:.14 8.3Additional information: .14 8.3.1Reinforcement14 8.3.2Adhesive:14 8.3.3Base Coat: 14 8.3.4Finishing coat.14 8.3.5EPS-Boards 14 8.3.6R
21、ails.14 8.3.7Anchors.14 Annex A (normative) Factory production control15 Annex B (informative) Additional information for customers and designers.17 B.1Resistance of the system surface to cracking17 Bibliography18 Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 09:49:16 GMT+00:00 2006, Uncont
22、rolled Copy, (c) BSI EN 13499:2003 (E) 3 Foreword This document EN 13499:2003 has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by pu
23、blication of an identical text or by endorsement, at the latest by February 2004, and conflicting national standards shall be withdrawn at the latest by February 2004. This European Standard contains two annexes: Annex A (normative)Factory production control Annex B (informative) Additional informat
24、ion for customers and designers This European Standard is one of a series of standards for insulation products used in buildings, but can be used in other areas where appropriate. This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organiz
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13499 2003
链接地址:https://www.31doc.com/p-3738189.html