BS-EN-13524-2003.pdf
《BS-EN-13524-2003.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13524-2003.pdf(28页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13524:2003 Highway maintenance machines Safety requirements The European Standard EN 13524:2003 has the status of a British Standard ICS 43.160; 93.080.99 ? BS EN 13524:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee
2、on 3 April 2003 BSI 3 April 2003 ISBN 0 580 41526 0 National foreword This British Standard is the official English language version of EN 13524:2003. The UK participation in its preparation was entrusted by Technical Committee B/513, Construction equipment and plant, and site safety, to Subcommitte
3、e B/513/1, Earth-moving machinery (International), which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this
4、document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contr
5、act. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals fo
6、r change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 25 and a back cover. The BSI copyright date displayed in t
7、his document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13524 March 2003 ICS 43.160; 93.080.99 English version Highway maintenance machines - Safety requirements Machines de maintenance d
8、es routes - Exigences de scurit Maschinen fr den Straenbetriebsdienst - Sicherheitsanforderungen This European Standard was approved by CEN on 6 December 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard t
9、he status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German)
10、. A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland
11、, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stass
12、art, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13524:2003 E EN 13524:2003 (E) 2 Contents page Foreword3 0Introduction3 1Scope 3 2Normative references 4 3Terms and definitions5 4List of significant hazar
13、ds.6 5Safety requirements and/or measures.7 5.1Combination of carrier vehicle and machine for highway maintenance8 5.2Controls 8 5.3Access and walkways .8 5.4Precautions against hazards caused by moving parts8 5.5Hot surfaces .9 5.6Attachment fittings 9 5.7Safety mechanisms for changing machines.9 5
14、.8Lifting devices9 5.9Safety mechanism for transportation10 5.10Support equipment for machines and components.10 5.11Disconnectable power and signal-transmitting systems 10 5.12Requirements for fluid power systems10 5.13Special protection against parts being ejected10 5.14Controls for machines using
15、 revolving/oscillating tools.11 5.15Protective covering of moving parts11 5.16Special protection measures to prevent unintentional contact with revolving tools in the operating area of mowing and mulching machines.11 6Information for use 14 6.1Operators manual .15 6.2Spare parts list.15 7Marking .16
16、 8Verification16 Annex A (informative) Attachment plate for a truck .17 Annex B (normative) Stipulations on the design and testing of mowing and mulching machines 18 Annex ZA (informative) Relationship of this document with EC Directives.24 Bibliography25 EN 13524:2003 (E) 3 Foreword This document (
17、EN 13524:2003) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endors
18、ement, at the latest by September 2003, and conflicting national standards shall be withdrawn at the latest by September 2003. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EC Dir
19、ective(s). For relationship with EC Directives, see informative annex ZA, which is an integral part of this document. The Annex A is informative and contains Attachment plate of truck“. The Annex B is normative and contains “Stipulations on the design and testing of mowing and mulching machines”. Ac
20、cording to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherland
21、s, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. 0Introduction This European Standard is a Type C-standard as stated in EN 292. The machinery concerned and the extent to which hazards are covered are indicated in the scope of this standard. 1 Scope This European Stan
22、dard applies to machines used for highway maintenance which are attached to or mounted on carrier vehicles and which are defined in clause 3. Directives and standards for the vehicular truck chassis aspect, termed carrier vehicle in this standard, would be those relevant to that equipment, even wher
23、e specific modifications have been made to adapt the machines for highway maintenance application. The use in public road traffic is governed by the national regulations. This European Standard deals with all significant hazards identified through a risk assessment pertinent to highway maintenance m
24、achines, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This European Standard does not deal with significant hazards associated with noise and EMC. This European Standard specifies the appropriate technical measures to eliminate or reduce risks
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13524 2003
链接地址:https://www.31doc.com/p-3738195.html