BS-EN-15380-3-2006.pdf
《BS-EN-15380-3-2006.pdf》由会员分享,可在线阅读,更多相关《BS-EN-15380-3-2006.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15380-3:2006 Railway applications Designation system for railway vehicles Part 3: Designation of installation sites and locations The European Standard EN 15380-3:2006 has the status of a British Standard ICS 01 110; 45.060.01 ? BS EN 15380-3:2006 This British Standard was pub
2、lished under the authority of the Standards Policy and Strategy Committee on 31 July 2006 BSI 2006 ISBN 0 580 48946 9 National foreword This British Standard is the official English language version of EN 15380-3:2006. The UK participation in its preparation was entrusted to Technical Committee RAE/
3、1, Railway applications, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. This standard has been produced from Part 4 of the DIN 25002 series of standards under the CEN fast-track procedure. The UK voted against the d
4、ocument in both associated ballots stating that the translation of the documents from German to prepare the English version has resulted in a lack of clarity as to the intent and meaning of some of the terminology used. There is a concern that some of the railway-related terminology used does not co
5、rrespond to UK usage. Therefore, this standard should be applied with care and consideration in order to avoid misunderstanding. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the sect
6、ion entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. C
7、ompliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related
8、 international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 12, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the docum
9、ent was last issued. Amendments issued since publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15380-3 April 2006 ICS 01.110; 45.060.01 English Version Railway applications - Designation system for railway vehicles - Part 3: Designation of installation sites and
10、locations Applications ferroviaires - Systme de classification pour vhicules ferroviaires - Partie 3: Description des positions dinstallation Bahnanwendungen - Kennzeichnungssystematik fr Schienenfahrzeuge - Teil 3: Kennzeichnung von Aufstellungs- und Einbauorten This European Standard was approved
11、by CEN on 6 March 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standa
12、rds may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to t
13、he Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Nor
14、way, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any for
15、m and by any means reserved worldwide for CEN national Members. Ref. No. EN 15380-3:2006: E EN 15380-3:2006 (E) 2 Contents Page Foreword3 Introduction.4 1 Scope 4 2 Normative references4 3 Terms and definitions .4 4 Designation of installation sites.4 4.1 General4 4.2 Designation set5 5 Designation
16、of locations.6 5.1 General6 5.2 Designation set6 Annex A (informative) Examples of installation site and location designation9 Bibliography12 List of Tables Table 1 Location subdivision. 8 List of Figures Figure 1 Designation principle. 5 Figure 2 Example of installation site vehicle designation 5 F
17、igure 3 Location designation principle. 6 Figure 4 Example of a location designation. 7 Figure 5 Example of a location designation with product group and location given 7 Figure A.1 Examples of installation site and location designation . 9 Figure A.2 Designation of locations on a locomotive. 10 Fig
18、ure A.3 Designation of locations on a 3-compartment suburban vehicle . 11 EN 15380-3:2006 (E) 3 Foreword This document (EN 15380-3:2006) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the stat
19、us of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. The EN 15380 series of standards, Railway applications Designation system for railway vehicles
20、consists of: Part 1: General principles Part 2: Product groups Part 3: Designation of installation sites and locations This European Standard is based on Part 4 of the DIN 25002 series of standards. After approval, the text of DIN 25002-4 submitted to the PQ procedure was brought into line with the
21、formal requirements of an EN. The resulting editorial amendments have led to slightly modified wordings but they have no effect on the technical content of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to i
22、mplement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and th
23、e United Kingdom. EN 15380-3:2006 (E) 4 Introduction Giving the location designations is necessary in order to systematize installation planning and to provide traceability of vehicle parts, structural units, combined assemblies and objects. 1 Scope As a railway-specific technical standard, this doc
24、ument gives rules for the designation of installation sites and locations in railway vehicles. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 15380 2006
链接地址:https://www.31doc.com/p-3738229.html