BS-EN-13595-3-2002.pdf
《BS-EN-13595-3-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13595-3-2002.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13595-3:2002 Protective clothing for professional motorcycle riders Jackets, trousers and one-piece or divided suits Part 3: Test method for determination of burst strength The European Standard EN 13595-3:2002 has the status of a British Standard ICS 13.340.10 ? BS EN 13595-3
2、:2002 This British Standard, having been prepared under the direction of the Health and Environment Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 2 August 2002 BSI 2 August 2002 ISBN 0 580 40217 7 National foreword This Brit
3、ish Standard is the official English language version of EN13595-3:2002. The UK participation in its preparation was entrusted by Technical Committee PH/3, Protective clothing, to Subcommittee PH/3/9, Clothing for protection of riders of motorcycles, which has the responsibility to: A list of organi
4、zations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Corre
5、spondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not
6、of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European development
7、s and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued sin
8、ce publication Amd. No. DateComments EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13595-3 July 2002 ICS 13.340.10 English version Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 3: Test method for determination of burst strengt
9、h Vtements de protection pour les motocyclistes professionnels - Vestes, pantalons et combinaisons une ou deux pices - Partie 3: Mthode dessai pour dterminer la rsistance lclatement Schutzkleidung fr professionelle Motorradfahrer - Jacken, Hosen und ein- oder mehrteilige Anzge - Teil 3: Prfverfahren
10、 zur Bestimmung der Berstfestigkeit This European Standard was approved by CEN on 6 April 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-d
11、ate lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the
12、responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
13、Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any m
14、eans reserved worldwide for CEN national Members. Ref. No. EN 13595-3:2002 E EN 13595-3:2002 (E) 2 Contents page Foreword3 Introduction.4 1Scope 4 2Normative references 4 3Terms and definitions4 4Determination of burst strength.5 4.1Principle5 4.2Apparatus and materials.5 4.3Test specimens6 4.4Proce
15、dure .6 4.5Test report 7 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives8 EN 13595-3:2002 (E) 3 Foreword This document EN 13595-3:2002 has been prepared by Technical Committee CEN/TC 162 “Protective clothing including ha
16、nd and arm protection and lifejackets“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2003, and conflicting national standards shall be withdrawn
17、 at the latest by January 2003. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative annex ZA, which is an integr
18、al part of this document. This standard is part of a series of standards specifying requirements for particular items of clothing or particular performance levels and hazards. EN 13595 comprises four parts: Part 1: General requirements; Part 2: Test method for determination of impact abrasion resist
19、ance; Part 3: Test method for determination of burst strength; Part 4: Test method for determination of impact cut resistance. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Be
20、lgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. EN 13595-3:2002 (E) 4 Introduction The only protection a motorcyclist involved in a road traffic accident ha
21、s against injury is the clothing he or she is wearing at the time. Motorcyclists clothing is generally worn as an extension of normal clothing, providing protection against ambient conditions of wind, water and cold, but it should also provide some protection from injury in the event of an accident.
22、 It is intended not to hinder a rider from controlling his machine. It should be of an acceptable appearance to the wearer. This European Standard is primarily concerned with the protection provided by clothing against injury in accidents. The hazards to which motorcyclists are exposed vary widely d
23、epending on the physical environment such as the nature of the road track or mountainside, the climatic environment, the traffic environment, the speed at which the motorcycle is being ridden and the skill of the rider. The number of combinations of possible hazards is very large. Total clothing per
24、formance against every identified hazard could be required for each combination. This would be impracticably complicated. Therefore this standard contains the requirements for single characteristics of single items of clothing or simple combinations of garments. This standard is part of a series of
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13595 2002
链接地址:https://www.31doc.com/p-3738319.html