BS-EN-166100-1998.pdf
《BS-EN-166100-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-166100-1998.pdf(22页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 166100:1998 Harmonized system of quality assessment for electronic components Sectional specification: Surface acoustic wave (SAW) filters The European Standard EN 166100:1998 has the status of a British Standard ICS 31.160 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 1
2、7 08:20:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 166100:1998 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 October 1998 BSI 05-1999 ISBN 0 580 29290
3、 8 National foreword This British Standard is the English language version of EN 166100:1998 published by the European Electronic Components Committee (CECC) of the European Committee for Electrotechnical Standardization (CENELEC). The UK participation in its preparation was entrusted to Technical C
4、ommittee EPL/49, Piezoelectric devices for frequency control and selection, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests infor
5、med; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in
6、this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. U
7、sers of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 16 and a
8、 back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:20:09
9、 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 166100:1998 BSI 05-1999i Contents Page National forewordInside front cover Foreword2 Text of EN 1661005 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:20:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun she
10、ffieldun, na, Fri Nov 17 08:20:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 166100 August 1998 ICS 31.160 Descriptors: Surface acoustic wave (SAW) filters, capability approval, sectional specification, capability qualifying components (CQC), qual
11、ity conformance inspection, test and measurement procedures English version Sectional Specification: Surface acoustic wave (SAW) filters Spcification intermdiaire: Filtres ondes acoustiques de surface (OAS) Rahmenspezifikation: Oberflchenwellen (OFW) Filter This European Standard was approved by CEN
12、ELEC on 1998-01-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standa
13、rds may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notif
14、ied to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
15、 Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC All rights of exploitation in any fo
16、rm and by any means reserved worldwide for CENELEC members. Ref. No. EN 166100:1998 E Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:20:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 166100:1998 BSI 05-1999 2 Foreword This European Standard was prepared by the Technical Committee CENELE
17、C TC 49, Piezoelectric devices for frequency control and selection. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 166100 on 1998-01-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by pu
18、blication of an identical national standard or by endorsement(dop) 1998-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 1998-12-01 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 17 08:20:09 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 166100:
19、1998 BSI 05-19993 Contents Page Foreword2 1Scope5 2General, preferred ratings and guidance on detail specifications5 2.1Related documents5 2.2Preferred ratings and characteristics5 2.3Information to be prescribed in detail specifications5 3Capability approval5 3.1Eligibility for capability approval5
20、 3.2Structural similarity5 3.3Procedures for capability approval6 3.4Description of capability6 3.5Capability qualifying components (CQCs)6 3.6Inspection requirements for CQCs7 3.7Programme for capability approval7 3.8Capability approval report7 3.9Abstract of description of capability7 3.10 Modific
21、ations likely to affect capability approval7 3.11 Initial capability approval7 3.12 Maintenance of capability approval13 3.13 Rework and repair work13 3.14 Quality conformance inspection13 3.15 Screening procedures13 4Test and measurements procedures13 Annex A Example layout of an abstract of descri
22、ption of capability for inclusion in CECC 00 2O015 Annex B Layout of the front page of a CQC specification for process control15 Annex C Layout of the front page of a CQC specification to demonstrate a boundary or limit16 Figure 1 Selection of CQCs9 Figure 2 Test plan for photolithography process CQ
23、Cs10 Figure 3 Test plan for dicing process CQCs10 Figure 4 Test plan for die bonding CQCs10 Figure 5 Test plan for wire bonding and internal lead CQCs10 Figure 6 Test plan for film thickness CQCs11 Figure 7 Test plan for sealing of enclosure CQCs11 Figure 8 Test plan for integrity of construction CQ
24、Cs11 Page Figure 9 Test plan for climate the performance limits claimed for the processes and products, that is, those specified for the Capability Qualifying Components (CQCs); the range of mechanical structures for which approval is granted. 3.3.2 Application for capability approval In order to ob
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 166100 1998
链接地址:https://www.31doc.com/p-3738358.html