BS-EN-10088-3-1995.pdf
《BS-EN-10088-3-1995.pdf》由会员分享,可在线阅读,更多相关《BS-EN-10088-3-1995.pdf(48页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10088-3:1995 Stainless steels Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes The European Standard EN 10088-3:1995 has the status of a British Standard ICS 77.140.20; 77.140.50 BS EN 10088-3:1995 This British Stan
2、dard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 November 1995 BSI 11-1998 The following BSI references relate to the work on this standard: Committee reference ISE/31 Draft for commen
3、t 93/305487 DC ISBN 0 580 24699 X Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee ISE/31, Wrought steels, upon which the following bodies were represented: Associated Offices Technical Committee British Chain Manufacturer
4、s Association British Coal Corporation British Forging Industry Association British Industrial Fasteners Federation British Railways Board British Steel Industry Cold Rolled Sections Association Department of Trade and Industry (National Physical Laboratory) Engineering Industries Association Federa
5、tion of British Engineers Tool Manufacturers Lloyds Register of Shipping Ministry of Defence National Association of Steel Stockholders Road Vehicle Spring Society Society of Motor Manufacturers and Traders Limited Stainless Steel Fabricators Association of Great Britain Amendments issued since publ
6、ication Amd. NoDateComments BS EN 10088-3:1995 BSI 11-1998i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EN 10088-3 5 List of references Inside back cover BS EN 10088-3:1995 ii BSI 11-1998 National foreword This Part of BS EN 10088 has been prepared
7、 by Technical Committee ISE/31 and is the English language version of EN 10088-3 Stainless steels Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes published by the European Committee for Standardization (CEN). Together with BS EN 10088-1
8、and BS EN 10088-2, this Part of BS EN 10088 partially supersedes BS 970-1:1991, which has been amended. This Part of BS EN 10088 should be used in preference to BS 970-1 whenever applicable. Work is continuing in Europe to prepare standards covering boron steels and surface quality. A British Standa
9、rd does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred toCorresponding Bri
10、tish Standard EN 10002-1:1990 EN 10002-5:1991 EN 10021:1993 BS EN 10002 Tensile testing of metallic materials Part 1:1990 Method of test at ambient temperature Part 5:1992 Method of test at elevated temperatures BS EN 10021:1993 General technical delivery requirements for steel and iron products EN
11、10027-1:1992 EN 10027-2:1992 BS EN 10027 Designation systems for steels Part 1:1992 Steel names, principal symbols Part 2:1992 Steel numbers EN 10045-1:1990 EN 10052:1993 BS EN 10045 Charpy impact test on metallic materials Part 1:1990 Test method (V- and U-notches) BS EN 10052:1994 Vocabulary of he
12、at treatment terms for ferrous products EN 10079:1992 EN 10088-1:1995 BS EN 10079:1993 Definition of steel products BS EN 10088 Stainless steels Part 1:1995 List of stainless steels EURONORM 114BS 5903:1980 Method for determination of resistance to intergranular corrosion of austenitic stainless ste
13、els: copper sulphate sulphuric acid method (Moneypenny Strauss test) EN 10204:1991BS EN 10204:1991 Metallic products. Types of inspection documents Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 42, an inside back cover an
14、d a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10088-3 April 1995 ICS 77.140.20; 77.140.50 Descriptors: Iron an
15、d steel products, hot-rolled products, drawing: forming process, semi-finished products, metal bars, wire rod, metal sections, stainless steels, delivery, designation, dimensions, dimensional tolerances, chemical composition, grades: quality, classifications, mechanical properties, tests marking Eng
16、lish version Stainless steels Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes Aciers inoxydables Partie 3: Conditions techniques de livraison pour les demi-produits, barres, fils machine et profils pour usage gnral Nichtrostende Sthle Te
17、il 3: Technische Lieferbedingungen fr Halbzeug, Stbe, Walzdraht und Profile fr allgemeine Verwendung This European Standard was approved by CEN on 1995-02-28. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard th
18、e status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German
19、). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Ger
20、many, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 All
21、rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN 10088-3:1995 E EN 10088-3:1995 BSI 11-1998 2 Foreword This European Standard has been prepared by SC 1, Stainless steels, of Technical Committee ECISS/TC 23, Steels for
22、 treatment, alloy steels and free-cutting steels Qualities, of which the secretariat is held by DIN. This European Standard replaces: EU 88-1:1986, Stainless steels Part 1: Technical delivery conditions for bars, wire rod and forgings. This European Standard shall be given the status of a national s
23、tandard, either by publication of an identical text or by endorsement, at the latest by October 1995. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Irelan
24、d, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom. Contents Page Foreword2 1 Scope 5 2 Normative references 5 3 Definitions 5 3.1 Stainless steels 5 3.2 Product forms 5 3.3 Types of heat treatment 5 4 Dimensions and tolerances on dimensions 5 5 Calculati
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10088 1995
链接地址:https://www.31doc.com/p-3738396.html