BS-EN-13395-3-2002.pdf
《BS-EN-13395-3-2002.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13395-3-2002.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13395-3:2002 Products and systems for the protection and repair of concrete structures Test methods Determination of workability Part 3: Test for flow of repair concrete The European Standard EN 13395-3:2002 has the status of a British Standard ICS 91.080.40; 91.100.30 ? Licen
2、sed Copy: sheffieldun sheffieldun, na, Mon Oct 30 06:18:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13395-3:2002 This British Standard, having been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of th
3、e Standards Policy and Strategy Committee on 31 July 2002 BSI 31 July 2002 ISBN 0 580 40127 8 National foreword This British Standard is the official English language version of EN 13395-3:2002. The UK participation in its preparation was entrusted by Technical Committee B/517, Concrete, to Subcommi
4、ttee B/517/8, Protection and repair of concrete structures, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to
5、 in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions o
6、f a contract. Users are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or p
7、roposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright date disp
8、layed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 06:18:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13395-3 May 20
9、02 ICS 91.080.40; 91.100.30 English version Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete Produits et systmes de protection et de rparation des structures en bton - Mthodes dessai - D
10、termination de louvrabilit - Partie 3: Essai dcoulement du bton Produkte und Systeme fr den Schutz und die Instandsetzung von Betontragwerken - Prfverfahren - Bestimmung der Verarbeitbarkeit - Teil 3: Prfung des Flieverhaltens von Instandsetzungsbeton This European Standard was approved by CEN on 4
11、January 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be
12、 obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Managemen
13、t Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdo
14、m. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13395-3:2002 E Licen
15、sed Copy: sheffieldun sheffieldun, na, Mon Oct 30 06:18:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13395-3:2002 (E) 2 Contents page Foreword3 1Scope 4 2Normative references4 3Terms and definitions4 4Principle4 5Equipment 5 6Test procedure.5 7Test report5 Licensed Copy: sheffieldun sheffieldun,
16、 na, Mon Oct 30 06:18:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13395-3:2002 (E) 3 Foreword This document EN 13395-3:2002 has been prepared by Technical Committee CEN/TC 104 “Concrete and related products“, the secretariat of which is held by DIN. This document has been prepared by CEN/TC 104
17、/SC8, “Product and systems for the protection and repair of concrete structures“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2002, and conf
18、licting national standards shall be withdrawn at the latest by December 2002. This European Standard is one of a series dealing with products and systems for the protection and repair of concrete structures. It describes a method for determining the workability of free-flowing repair concrete mixes.
19、 It is one of a series of inter-related parts dealing with the workability of repair grouts, mortars and concretes. The other parts are: ? EN 13395-1, Products and systems for the protection and repair of concrete structures Test methods Determination of workability Part 1: Test for flow of thixotro
20、pic mortars ; ? EN 13395-2, Products and systems for the protection and repair of concrete structures Test methods Determination of workability Part 2: Test for flow of grout or mortar ; ? EN 13395-4, Products and systems for the protection and repair of concrete structures Test methods Determinatio
21、n of workability Part 4: Application of repair mortar overhead. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greec
22、e, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 06:18:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13395-3:2002 (E) 4 1 Scope This European Standard specifies a
23、 method for determining the workability of high flow hydraulic cement, PCC and PC based concrete products for the protection and repair of concrete, as defined in EN 1504-3, whose workability is outside the normal range for concrete as defined in ENV 206. Tests for the workability of repair products
24、 and systems based on thixotropic mortar and high flow grout or mortar are contained in prEN 13395-1 and prEN 133952 respectively. Normal workability concrete mixes, which can include proprietary formulations, are applied and compacted in accordance with conventional practice. The workability of the
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13395 2002
链接地址:https://www.31doc.com/p-3738408.html