BS-EN-10213-2-1996.pdf
《BS-EN-10213-2-1996.pdf》由会员分享,可在线阅读,更多相关《BS-EN-10213-2-1996.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 10213-2:1996 Technical delivery conditions for steel castings for pressure purposes Part 2: Steel grades for use at room temperature and at elevated temperature The European Standard EN 10213-2:1995 has the status of a British Standard ICS 77.140.30 BS EN 10213-2:1996 This Bri
2、tish Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 May 1996 BSI 12-1998 The following BSI references relate to the work on this standard: Committee reference ISE/6 Draft for com
3、ment 93/301840 DC ISBN 0 580 25538 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee ISE/6, Steel castings, upon which the following bodies were represented: BEAMA Ltd. British Pump Manufacturers Association British Valve
4、 and Actuator Manufacturers Association Castings Technology International Engineering Equipment and Materials Users Association Hopkinsons Limited Institute of British Foundrymen Institution of Mechanical Engineers Lloyds Register of Shipping Ministry of Defence Railway Industry Association Amendmen
5、ts issued since publication Amd. No.DateComments BS EN 10213-2:1996 BSI 12-1998i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 10213-23 BS EN 10213-2:1996 ii BSI 12-1998 National foreword This British Standard has been prepared under the direction of
6、 Technical Committee ISE/6, Steel castings, and is the English language version of EN 10213-2 Technical delivery conditions for steel castings for pressure purposes Part 2: Steel grades for use at room temperature and at elevated temperatures published by the European Committee for Standardization (
7、CEN). The following Parts of BS EN 10213 supersede BS 1504: 1976 which is withdrawn: A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of its
8、elf confer immunity from legal obligations. BS EN 10213-1Technical delivery conditions for steel castings for pressure purposes Part 1:1996 General BS EN 10213-2Technical delivery conditions for steel castings for pressure purposes Part 2:1996 Steel grades for use at room temperature and elevated te
9、mperatures BS EN 10213-3Technical delivery conditions for steel castings for pressure purposes Part 3:1996 Steel for use at low temperatures BS EN 10213-4Technical delivery conditions for steel castings for pressure purposes Part 4:1996 Austenitic and austenitic-ferretic steel grades Summary of page
10、s This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 6 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. EUR
11、OPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10213-2 December 1995 ICS 77.140.10 Descriptors: Cast steels, structural steels, boilers, pressure equipment, delivery, designation, grades: quality, chemical composition, mechanical properties, environmental tests, high temperature tests English ver
12、sion Technical delivery conditions for steel castings for pressure purposes Part 2: Steel grades for use at room temperature and elevated temperatures Conditions techniques de livraison des pices moules en acier pour service sous pression Partie 2: Nuances dacier pour utilisation temprature ambiente
13、 et tempratures leves Technische Lieferbedingungen fr Stahlgu fr Druckbehlter Teil 2: Stahlsorten fr die Verwendung bei Raumtemperatur und erhhten Temperaturen This European Standard was approved by CEN on 1995-10-20. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which st
14、ipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard
15、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standard
16、s bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central
17、 Secretariat: rue de Stassart 36, B-1050 Brussels 1995 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members Ref. No. EN 10213-2:1995 E EN 10213-2:1995 BSI 12-1998 2 Foreword This European Standard was prepared by Technical Committ
18、ee ECISS/TC 31, Steel castings, the secretariat of which is held by AFNOR. This European Standard EN 10213 Technical delivery conditions for steel castings for pressure purposes consists of four Parts: Part 1: General; Part 2: Steel grades for use at room temperature and elevated temperatures; Part
19、3: Steel grades for use at low temperatures; Part 4: Austenitic and austenitic-ferritic steel grades. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the very latest by June 1996, and conflicting national stand
20、ards shall be withdrawn at the latest by June 1996. According to the Internal Regulations of CEN/CENELEC, the following countries are bound to implement this European Standard: Austria, Belguim, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Port
21、ugal, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword2 1Scope3 2Normative references3 3Requirements3 Annex A (informative) Creep properties6 Table 1 Chemical composition (cast analysis) 4 Table 2 Mechanical properties5 Table A.1 Creep resistance 6 EN 10213-2:1995 BSI 12-199
22、83 1 Scope In accordance with the general delivery conditions of EN 10213-1 this standard specifies the chemical and mechanical requirements to be met under specific inspection of steel grades for use at room temperature and elevated temperatures. 2 Normative references This European Standard incorp
23、orates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this Europ
24、ean Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 10213-1, Technical delivery conditions for steel castings for pressure purposes Part 1: General. 3 Requirements 3.1 Chemical composition The cast a
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 10213 1996
链接地址:https://www.31doc.com/p-3738430.html