BS-EN-13126-12-2008.pdf
《BS-EN-13126-12-2008.pdf》由会员分享,可在线阅读,更多相关《BS-EN-13126-12-2008.pdf(16页珍藏版)》请在三一文库上搜索。
1、BS EN 13126-12:2008 ICS 91.190 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Building hardware Requirements and test methods for windows and doors height windows Part 12: Side hung projecting reversible hardware Licensed CopyChinese University of Hong Kong,
2、11/04/2009 07:15, Uncontrolled Copy, (c) BSI This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2009 BSI 2009 ISBN 978 0 580 67207 1 Amendments/corrigenda issued since publication DateComments BS EN 13126-12:2008 National foreword This
3、British Standard is the UK implementation of EN 13126-12:2008. It supersedes DD CEN/TS 13126-12:2004 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee B/538/4, Building hardware. A list of organizations represented on this committee can be obtained on r
4、equest to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Licensed CopyChinese University of Hong Kong, 11/04/2
5、009 07:15, Uncontrolled Copy, (c) BSI BS EN 13126-12:2008 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13126-12 November 2008 ICS 91.190Supersedes CEN/TS 13126-12:2004 English Version Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung
6、projecting reversible hardware Quincaillerie pour le btiment - Exigences et mthodes dessai des ferrures de fentres et portes-fentres - Partie 12: Ferrures pour ouvrants projection de laxe latral rversibles Baubeschlge - Beschlge fr Fenster und Fenstertren - Anforderungen und Prfverfahren - Teil 12:
7、Beschlge fr auskragende Drehflgel-Umkehrfenster This European Standard was approved by CEN on 5 October 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alter
8、ation. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tran
9、slation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germa
10、ny, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG
11、Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13126-12:2008: E Licensed CopyChinese University of Hong Kong, 11/04/2009 07:15, Uncontrolled Copy, (c) BSI BS EN 13126-12:2
12、008 EN 13126-12:2008 (E) 2 Contents Page Foreword3 1 Scope.5 2 Normative references 5 3 Terms and definitions5 4 Classification6 4.1 General6 4.2 Category of use (1 first digit).6 4.3 Durability (2 second digit)6 4.4 Mass (3 third digit)6 4.5 Fire resistance (4 fourth digit).6 4.6 Safety in use (5 f
13、ifth digit)6 4.7 Corrosion resistance (6 sixth digit).6 4.8 Security (7 seventh digit) .6 4.9 Application (8 eighth digit).6 4.10 Test sizes Size limitations (9 ninth digit).6 4.11 Example of classification for side hung projecting reversible hardware 7 5 Requirements .7 5.1 General7 5.2 Integrated
14、restrictors.7 5.3 Ease of sash movement test.8 5.4 Durability test .8 5.5 Obstructed track test.8 5.6 Static load test8 5.7 Additional load test8 6 Test equipment.9 7 Test methods9 7.1 Samples 9 7.2 Ease of sash movement test procedure9 7.3 Durability test procedure.10 7.4 Obstructed track test proc
15、edure 10 7.5 Static load test procedure.10 7.6 Additional load test procedure.11 7.7 Corrosion resistance.11 Annex A (informative) Test method diagrams12 Annex B (normative) Flow chart of test procedure13 Licensed CopyChinese University of Hong Kong, 11/04/2009 07:15, Uncontrolled Copy, (c) BSI BS E
16、N 13126-12:2008 EN 13126-12:2008 (E) 3 Foreword This document (EN 13126-12:2008) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a nati
17、onal standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by May 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent right
18、s. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN/TS 13126-12:2004. This European Standard is one of a series of European Standards dedicated to building hardware products. A full contribution to the preparation of this Eu
19、ropean Standard has been made by the European manufacturers organization “ARGE” and national standards bodies. EN 13126 Building hardware Requirements and test methods for windows and doors height windows consists of the following parts: Part 1: Requirements common to all types of hardware Part 2: C
20、asement fastener handles1) Part 3: Manoeuvring fittings for espagnolette bolts/sliding button1) Part 4: Espagnolette bolts1) Part 5: Devices that restrict the opening of windows1) Part 6: Variable geometry stay hinges (with or without a friction system) Part 7: Finger catches Part 8: Tilt Digit 2 du
21、rability grade 5 (25 000 cycles); Digit 3 mass 50 kg; Digit 4 fire resistance grade 0 (no requirements); Digit 5 safety in use grade 1; Digit 6 corrosion resistance grade 3; Digit 7 security - (no requirements); Digit 8 applicable part tested in accordance with Part 12 of this standard; Digit 9 test
22、 sizes S.R.W.1) = 1 100 mm, S.R.H.2) = 1 100 mm 5 Requirements 5.1 General The requirements for side hung projecting Reversible hardware shall be in accordance with Clause 5 of EN 13126-1:2006. 5.2 Integrated restrictors Where side hung projecting reversible hardware is fitted with an integrated res
23、trictor the hardware shall be tested in accordance with CEN/S 13126-5. 2) S.R.W. = sash rebate width 3) S.R.H. = sash rebate height Licensed CopyChinese University of Hong Kong, 11/04/2009 07:15, Uncontrolled Copy, (c) BSI BS EN 13126-12:2008 EN 13126-12:2008 (E) 8 5.3 Ease of sash movement test The
24、 test specified in 7.2 shall be used to determine the forces required to operate the hardware is appropriate for the intended use. On completion of the ease of sash movement test in accordance with 7.2. Force required to initiate movement in either the opening or closing direction shall not have exc
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 13126 12 2008
链接地址:https://www.31doc.com/p-3738480.html