BS-9301-N002-1971.pdf
《BS-9301-N002-1971.pdf》由会员分享,可在线阅读,更多相关《BS-9301-N002-1971.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 9301 N002: 1971 Detail specification for General purpose silicon signal diodes 150 mA, 150 V, hermetically sealed, glass encapsulation General application category Q UDC 621.382.2/.3 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 03:56:59 GM
2、T+00:00 2006, Uncontrolled Copy, (c) BSI BS 9301 N002:1971 BSI 01-2000 ISBN 0 580 06891 9 A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not o
3、f itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 8 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the a
4、mendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 03:56:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 9301 N002:1971 BSI 01-2000i Contents Page 1Limiting conditio
5、ns of use1 2Characteristics1 3Marking1 4Related documents2 5Ordering information2 Figure 1 Derating curve5 Figure 2 Forward characteristics6 Figure 3 Reverse characteristic7 Figure 4 Reverse current/temperature8 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 03
6、:56:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 03:56:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 9301 N002:1971 BSI 01-20001 1 Limiting conditions of use (not for inspection purposes) Absolute maxi
7、mum values 2 Characteristics (not for inspection purposes) 3 Marking 1) Each diode shall bear the following markings: a) Cathode terminal shall be identified. b) The manufacturers type designation. 2) Each package containing one or more of these diodes shall bear marking b) above and in addition: c)
8、 The factory identification code (from BS 9002). d) The date code. e) The number of this detail specification, i.e. BS 9301 N002, Issue 1. ELECTRONIC PARTS OF ASSESSED QUALITY: DETAIL SPECIFICATION Outline and dimensions (Third angle projection) GENERAL PURPOSE SIGNAL DIODE GENERAL APPLICATION CATEG
9、ORY Q MANUFACTURERS TYPE NUMBER AS SHOWN IN QPL IN BS 9002 OR CV 8790 150 mA 150 V SILICON DIODE HERMETICALLY SEALED GLASS ENCAPSULATION All dimensions are in millimetres For detail dimensions see BS 3934 SO6 Voltage rating VRContinuous reverse voltage over the specified operating temperature range
10、150 V Current rating IFContinuous forward current150 mA For derating curve of IF against Tamb see Figure 1 Thermal ratings TambOperating temperatures 55 C to 100 C TstgStorage temperatures 55 C to 100 C VF1Forward voltage at Tamb= 25 CIF= 100 mA1.2 Vmax. VF2Forward voltage at Tamb = 25 CIF = 15 mA0.
11、65 V min. VF3Forward voltage at Tamb = 25 CIF= 0.1 mA0.75 V max. IR1Reverse current at Tamb = 25 CVR = 150 V0.1 4A max. IR3Reverse current at Tamb = 100 CVR = 150 V5 4Amax. CCapacitance at Tamb= 25 CVR = 1 V10 pFmax. Licensed Copy: London South Bank University, London South Bank University, Fri Dec
12、08 03:56:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 9301 N002:1971 2 BSI 01-2000 4 Related documents This specification shall be read in conjunction with the following British Standards: BS 9000, “General requirements for electronic parts of assessed quality”. BS 9300, “Semiconductor devices o
13、f assessed quality: Generic data and methods of test”. It is written in accordance with: BS 9301, “Rules for the preparation of detail specifications for semiconductor devices of assessed quality general purpose signal diodes”. Other related documents are: BS 9001, “Sampling procedures and tables fo
14、r inspection by attributes for electronic parts of assessed quality”. BS 3934, “Dimensions of semiconductor devices”. 5 Ordering information Orders for this diode shall contain the following minimum information: (Qty) Signal diode type to BS 9301 N002 Issue 1 dated May 1971. Licensed Copy: London So
15、uth Bank University, London South Bank University, Fri Dec 08 03:56:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 9301 N002:1971 BSI 01-20003 Inspection requirements All tests shall be made at 25 2 C unless otherwise stated (see 1.2.4.1.5 of BS 9300:1969) InspectionBS 9300:1969 reference and cond
16、itions of test SymbolLimitsUnits min.max. Group A Subgroup A1 Visual inspection1.2.2 Subgroups A3, A4 and A5 not applicable Inspection level I, AQL 1.5 % Subgroup A2 Forward voltage Reverse current 1001 1002 Inspection level II, AQL 0.65 % IF = 100 mA VR = 150 V VF1 IR1 1.2 0.1 V 4A Group B Subgroup
17、 B1 Dimensions1.2.3 Subgroups B4, B5 and B6 not applicable Inspection level S2, AQL 6.5 % Ref. BS 3934.S06D G 2.71 7.62 mm mm Subgroup B2(a) Solderability1.2.6.10 Inspection level S4, AQL 4.0 % See Note 1 Subgroup B2(b) Rapid change of temperature followed by Damp heat, cyclic 1.2.6.7 1.2.6.3 Inspec
18、tion level S4, AQL 4.0 % Tamb 55 C to 100 C Six cycles Subgroup B3 Lead fatigue1.2.6.11.1 Inspection level S3, AQL 6.5 % Destructive test See Note 2 Subgroup B7 Electrical endurance1.2.7.2 Inspection level S4, AQL 1.5 % VR= 150 V Duration = 160 h min. Tamb= 100 C Post-test end-points for subgroups B
19、2(b) and B7 Forward voltage Reverse current 1001 1002 IF = 100 mA VR = 150 V VF1 IR1 1.3 0.2 V 4A Subgroup B8 CTR information1.1.11Attributes information for subgroup B2(a), B2(b), B3 and B7 Group C Subgroup C1 Dimensions1.2.3 Subgroups C2(a) and C4 not applicable Inspection level S2, AQL 6.5 % Ref.
20、 BS 3934, S06B2 L H 0.458 26.0 56.7 0.558 mm mm mm NOTE 1When method 1.2.6.10.2 is used, the inspection level shall be reduced to S3. NOTE 2Samples subjected to destructive tests shall not be accepted for release (see 2.6.5 of BS 9000:1967). Licensed Copy: London South Bank University, London South
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS 9301 N002 1971
链接地址:https://www.31doc.com/p-3738481.html